兼容光模块

标准协议光模块

兼容协议光模块

其它种类光器件

技术支持

安华高 Embedded光模块

安华高 Embedded光模块

The AFBR-77D4SZ and AFBR-78D4SZ are a set of 12-channel, pluggable, parallel fiber optics transmitter and receiver modules set optimized for short-range parallel multi-lane data communication and interconnect applications. These high-speed, high density optical modules are designed to operate over multimode fiber systems using a nominal wavelength of 850 nm.

The optical interface requires the user to provide a custom designed optical turn 1×12 ribbon cable PRIZM LightTurn connector.

安华高Avago SFP光模块

AFBR-571xZ

AFBR-571xZ 

        The Avago AFBR-571xZ  family of SFP optical transceivers offers a wide range of gigabit ethernet design options, including optional DMI features, two temperature ranges, and choice of standard or bail delatch.

The  AFBR-571xZ   family targets those applications requiring DMI features. The AFBR-571xZ  family is a streamlined product designed for those applications where DMI features are not needed.

FT  AFBR-5922ALZ

AFBR-5922ALZ

 AFBR-5922ALZ

          The Avago AFBR-5922ALZ is a high performance, cost-effective SFF optical transceiver for serial optical data communication applications supporting 2.125 and 1.0625 Gb/s data rates. This module is designed for multimode fiber and operates at a nominal wavelength of 850 nm. The transceiver incorporates 3.3VDC compatible technology including an 850nm VCSEL transmitter. The AFBR-5922ALZ offers maximum design flexibilty enabling Fibre Channel designers and system integrators to implement a wide range of solutions for multimode Fibre Channel applications. This product is fully compliant with all equipments meeting the Fibre Channel FC-PI 200-M5-SN-I and 200-M6-SN-I 2.125 GBd specifications, and is compliant with the Fibre Channel FC-PI 100-M5-SN-I, FC-PI 100-M6-SN-I, FC-PH2 100-M5-SN and FC-PH2 100-M6-SN-I 1.0625 GBd specifications. The AFBR-5922ALZ is also compliant with the SFF Multi Source Agreement (MSA).

AFBR-59M5LZ

AFBR-59M5LZ

Avago’s  AFBR-59M5LZ  optical transceiver supports high-speed serial links over multimode optical fiber at signaling rates up to 2.125 GBd. Compliant with the Small Form Factor (SFF) Multi Source Agreement (MSA) 2x5/2x10 mechanical specifications for LC Duplex transceivers, ANSI Fibre Channel FC-PI and IEEE 802.3 for gigabit applications the part is electrically interoperable with 2x5 and 2x6 conformant devices. The AFBR-59M5LZ is dimensionally compliant with the SFF MSA form factor with the exception of two additional pins for communicating with the diagnostic interface.

FT AFBR-7705EKZ

AFBR-7705EKZ

AFBR-7705EKZ

          The purpose of this evaluation kit is to provide designers with a convenient way to evaluate the AFBR-775BxxxZ/785BxxxZ pluggable parallel fiber optic modules. The application note describes the details of the evaluation kit , AFBR-7705EKZ (Transmitter Board) and AFBR-7805EKZ (Receiver Board) as well as some recommended test configurations and equipment that should be used during module evaluation.

 MicroPOD 12x10G Transmitter Module (300m)

AFBR-77D13SZ

AFBR-77D13SZ
 
The  AFBR-77D13SZ is a 12-channel pluggable, parallel fiber optics transmitter module device that supports 12x10G bandwidth with OM3 link distance up to 300 meters. The AFBR-77D13SZ and AFBR-78D13SZ are a Tx/Rx module pair optimized for short-range parallel multi-lane data communication and interconnect applications. The high density optical modules are designed to operate over multimode fiber systems using a nominal wavelength of 850 nm.

The optical interface requires a user to provide a custom designed optical turn 1×12 ribbon cable PRIZM  LightTurn connector.

FT MicroPOD 12x10G Receiver Module

AFBR-77D1SZ

AFBR-77D1SZ
 
The AFBR-77D1SZ  are a set of 12-channel, pluggable, parallel fiber optics transmitter and receiver fiber optic modules optimized for short-range parallel multi-lane data communication and interconnect applications. These high-speed, high density optical modules are designed to operate over multimode fiber systems using a nominal wavelength of 850 nm.
 The optical interface requires the user to provide a custom designed optical turn 1×12 ribbon cable PRIZM Light Turn connector.

MicroPOD 12x12.5G Receiver Module

AFBR-77D2SZ

AFBR-77D2SZ 

The AFBR-77D2SZ  are 12-channel, pluggable, parallel fiber optics transmitter and receiver modules set optimized for short-range parallel multi-lane data communication and interconnect applications. These high-speed, high density optical modules are designed to operate over multimode fiber systems using a nominal wavelength of 850 nm. 

FT MicroPOD Embedded Optical Modules

AFBR-77D4SZ

AFBR-77D4SZ
      The AFBR-77D4SZ  are a set of 12-channel, pluggable, parallel fiber optics transmitter and receiver modules set optimized for short-range parallel multi-lane data communication and interconnect applications. These high-speed, high density optical modules are designed to operate over multimode fiber systems using a nominal wavelength of 850 nm.

MicroPOD 12x14G Receiver Module

AFBR-77D4SZ

AFBR-77D4SZ

The AFBR-77D4SZ  are a set of 12-channel, pluggable, parallel fiber optics transmitter and receiver modules set optimized for short-range parallel multi-lane data communication and interconnect applications. These high-speed, high density optical modules are designed to operate over multimode fiber systems using a nominal wavelength of 850 nm.

FT  MicroPOD 12x10G Receiver Module (300m)

AFBR-78D13SZ

MicroPOD 12x10G Receiver Module (300m)
 
The Avago AFBR-78D13SZ is a 12-channel pluggable, parallel fiber optics receiver module device that supports 12x10G bandwidth with OM3 link distance up to 300 meters. The AFBR-77D13SZ and AFBR-78D13SZ are a Tx/Rx module pair optimized for short-range parallel multi-lane data communication and interconnect applications. The high density optical modules are designed to operate over multimode fiber systems using a nominal wavelength of 850 nm.
The optical interface requires a user to provide a custom designed optical turn 1×12 ribbon cable PRIZM  LightTurn connector.

MicroPOD 12x10G Transmitter Module

AFBR-78D1SZ

AFBR-78D1SZ
 
      The   AFBR-78D1SZ are a set of 12-channel, pluggable, parallel fiber optics transmitter and receiver modules optimized for short-range parallel multi-lane data communication and interconnect applications. These high-speed, high density optical modules are designed to operate over multimode fiber systems using a nominal wavelength of 850 nm.
The optical interface requires the user to provide a custom designed optical turn 1×12 ribbon cable PRIZM  LightTurn connector.

AFBR-79E3PZ

QSFP+ 3SR4 Pluggable Optical Transceiver Module for 10G and 40G Ethernet Applications

        The Avago AFBR-79E3PZ is a 4-channel QSFP+ pluggable optical transceiver module device with an integrated pull tab for 40 Gigabit Ethernet (40GbE) applications supporting extended link distance up to 300 m (400 m) using OM3 (OM4) multimode fiber (MMF). The device is capable of inter-operating with IEEE 10GBASE-SR compliant products that can manage higher incoming optical power.   The AFBR-79E3PZ is a high performance transceiver module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with each lane operating at 10.3125 Gbps, giving an aggregated bandwidth of 40 Gbps. This transceiver can also be used for high density 10 Gigabit Ethernet applications. It allows optical interoperability up to 300 m (400 m) using OM3 (OM4) MMF with any 10 Gigabit Ethernet (10GbE) transceivers, compliant to the IEEE 802.3ae 10GBASE-SR specifications with a minimum 1 dBm of receiver overload. It provides an effective port count of over 100 within 1 RU rack. The pull tab facilitates the insertion and extraction of the device in high port density environment. The device is designated as an QSFP+ 3SR4 solution, where the digit "3" represents 300m link distance using OM3 MMF. The AFBR-79E3PZ  is designed to operate over MMF systems using a nominal wavelength of 850 nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses an 8 or 12 fiber MTP (MPO) connector. The module incorporates Avago's proven integrated circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

FT AFBR-79E3PZ

AFBR-79E3PZ

AFBR-79E3PZ

 The Avago AFBR-79E3PZ is a 4-channel QSFP+ pluggable optical transceiver module device with an integrated pull tab for 40 Gigabit Ethernet (40GbE) applications supporting extended link distance up to 300 m (400 m) using OM3 (OM4) multimode fiber (MMF). The device is capable of inter-operating with IEEE 10GBASE-SR compliant products that can manage higher incoming optical power.   The AFBR-79E3PZ is a high performance transceiver module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with each lane operating at 10.3125 Gbps, giving an aggregated bandwidth of 40 Gbps. This transceiver can also be used for high density 10 Gigabit Ethernet applications. It allows optical interoperability up to 300 m (400 m) using OM3 (OM4) MMF with any 10 Gigabit Ethernet (10GbE) transceivers, compliant to the IEEE 802.3ae 10GBASE-SR specifications with a minimum 1 dBm of receiver overload. It provides an effective port count of over 100 within 1 RU rack. The pull tab facilitates the insertion and extraction of the device in high port density environment. The device is designated as an QSFP+ 3SR4 solution, where the digit "3" represents 300m link distance using OM3 MMF. The AFBR-79E3PZ  is designed to operate over MMF systems using a nominal wavelength of 850 nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses an 8 or 12 fiber MTP (MPO) connector. The module incorporates Avago's proven integrated circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

FT AFBR-79EAPZ

AFBR-79EAPZ

AFBR-79EAPZ

          The Avago AFBR-79EAPZ is a 4-channel QSFP+ pluggable optical transceiver module device with an integrated push-pull tab for 40 Gigabit Ethernet (40GbE) and InfiniBand applications. The device is a high performance transceiver for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 40 Gbps aggregate bandwidth. Each lane can operate at 10.3125 Gbps up to 100 m using OM3 fiber or 150 m using OM4 fiber. These modules support 4x10G InfiniBand (IB) quadruple data rate (40G-IB-QDR) application and is backward compatible to the 4x5G IB dual data rate (20G-IB-DDR) and 4x2.5G IB single data rate (10G-IB-SDR) applications as well.

AFBR-79EBPZ

AFBR-79EBPZ

      The Avago AFBR-79EBPZ is a 40 Gigabit Ethernet (40G) bidirectional (BiDi) multimode fiber (MMF) QSFP+ transceiver module designed for high-speed data center interconnect and enterprise networking applications. Based on proprietary 2x20G BiDi optics, the module enables four Tx and four Rx 10G electrical data lanes to transmit over a 2-fiber LC duplex cable, providing a cost-effective upgrade path from 10G to 40G Ethernet leveraging existing 10G MMF cabling infrastructure.

 The AFBR-79EBPZ supports 40G data transfer over 100 meters of OM3 fiber or 150 meters of OM4 fiber. The module is compliant to 40G XLPPI electrical specification per IEEE 802.3ba-2010 and QSFP+ SFF-8436 specification.

<<  1 [23 4 5  >>  

Search