SGMII SFP

SGMII SFP

SGMII SFP是专为100BASE-FX应用,建立在支持SGMII接口的PHY器件。标准串行ID信息兼容SFP MSA的收发功能、标准接口、制造商和其他信息。主机设备可以访问这些信息通过2线串行CMOS EEPROM的协议。如需进一步信息,请参阅SFP多源协议(MSA)。

  • SGMII SFP 2KM 光模块
  • SGMII SFP 20KM 光模块
  • SGMII SFP 40KM 光模块
  • SGMII SFP 80KM 光模块
  • SGMII SFP 120KM 光模块
  • SGMII SFP 160KM 光模块

SGMII SFP

SGMII SFP Transceiver

SGMII SFP Transceiver

  1.  Connection Gigabit Ethernet To Fast Ethernet
  2.  Switch to Switch interface
  3.  Switched backplane applications
  4.  Router/Server interface
SGMII SFP

SGMII SFP光模块

SGMII SFP is designed for 100BASE-FX applications, with build-in PHY device supporting SGMII interface. The standard serial ID information Compatible with SFP MSA describes the transceiver’s capabilities, standard interfaces, manufacturer and other information. The host equipment can access this information via the 2-wire serial CMOS EEPROM protocol. For further information, please refer to SFP Multi-Source Agreement (MSA). SGMI SFP transceivers are 100BASE-FX Small Form-Factor Pluggable (SFP) Fast Ethernet Interface Converter on Gigabit SFP Ports.

SGMII-SFP-SERIES

SGMII SFP全系列光模块

F-tone SGMII SFP is designed for 100BASE-FX applications, with build-in PHY device supporting SGMII interface. The standard serial ID information Compatible with SFP MSA describes the transceiver’s capabilities, standard interfaces, manufacturer and other information.

SGMII-SFP-20KM

SGMII-SFP-20KM

  • Package Type: SGMII SFP 125M  850nm/1310nm
  • Fiber Types: 50/125nm MMF/ 62.5/125nm MMF/SMF
  • Fiber Connector Type: Duplex LC
  • Transmission Mode: Half duplex or full duplex
  • Transmission Distance: 2km,10km,20km
SGMII-SFP-2KM

SGMII-SFP-2KM

F-tone SGMII-SFP-2km is designed for 100BASE-FX applications, supporting distance from 0.5m to 2km on MMF with build-in PHY device supporting SGMII interface.
The optical output can be disabled by a TTL logic high-level input of Tx Disable. Tx Fault is provided to indicate that degradation of the laser.