标准光模块

技术支持

CFP2光模块

CFP2光模块
  • 10x10GBASE-SR and Extended Reach 100GBASE-SR10 300m CFP2 Optical Transceiver;Form Factor: CFP2 Distance: 100 m Data Rate (max): 103.1 Gb/s Wavelength: 850nm Band,Protocol: 100G Ethernet Compliant
  • 100GBASE-SR10 and OTN Multirate 100m CFP2 Optical Transceiver;Form Factor: CFP2 Distance: 100 m Data Rate (max): 112 Gb/s Wavelength: 850nm Band,Protocol: OTN OTU4 Compliant 100G Ethernet Compliant
  • 100GBASE-LR4 10km CFP2 Optical Transceiver;Form Factor: CFP2 Distance: 10 km Data Rate (max): 103.1 Gb/s Wavelength: 1310nm Band,Protocol: 100G Ethernet Compliant
  • 100GBASE-LR4 and OTU4 Dual Rate 10km CFP2 Optical Transceiver;Form Factor: CFP2 Distance: 10 km Data Rate (max): 112 Gb/s Wavelength: 1310nm Band;Protocol: 100G Ethernet Compliant

CFP4光模块

100G CFP2 ER4

100G CFP2 ER4

The 100G CFP2 ER4 optical transceiver integrates the transmit and receive path onto one module.On the transmit side, four lanes of serial data streams are recovered, retimed,and passed on to four laser drivers, which control four electric-absorption modulated lasers (EMLs) with 1296, 1300, 1305, and 1309 nm center wavelengths. The optical signals are then multiplexed into a single-mode fiber through an industry-standard LC connector.On the receive side, four lanes of optical data streams are optically demultiplexed by an integrated optical demultiplexer. Each data steam is recovered by a PIN photodetector and transimpedance amplifier, retimed, and passed on to an output driver. This module features a hot-pluggable electrical interface, low power consumption, and MDIO management interface. 

100G CFP2 LR4

100G CFP2 LR4

CFP2 LR4,100G CFP2 LR4:The CFP2-1310-LR4 is a fully integrated 100Gbit/s optical transceiver module that consists of a 1310 nm wavelength cooled EA-DFB LD, Driver IC, PIN photo-diode, pre-amplifier, dual clock and data recovery (CDR) ICs with 25 Gbit/s electrical interface which complies with CFP2 Multiple Source Agreement (MSA) specifications.

100G CFP2 LR4

100G LR4 OTU4 CFP2光模块

100G LR4 OTU4 CFP2光模块:兼容CFP2 MSA,符合OTU4,传输距离可达10km,4并联电串行接口和CML信号交流耦合,MDIO实时诊断和控制能力,TX和RX CDR再定时输出输入,工作温度0°C + 70°C,3.3V电源。北亿纤通专业研发生产100G LR4 OTU4 CFP2光模块,工业级100G LR4 OTU4 CFP2光模块,100G LR4 OTU4 CFP2,工业级100G LR4 OTU4 CFP2,是一个专业的100G LR4 OTU4 CFP2光模块厂家,有很好的100G LR4 OTU4 CFP2光模块价格

 100G SR10 CFP2 Optical Transceiver

100G SR10 CFP2 Optical Transceiver

100G SR10 CFP2 Optical Transceiver:100G CFP2 SR10光模块为面向高密度 100G 以太网和光传送网络 (OTN, Optical Transport Network) 应用设计的,该模块提供10 路并行数据通道和支持热插拔,符合 IEEE 802.3ba和100GBASE-SR10,该产品在设计上极大化 100G 网络上的 10G 数据通道传送,并且可与 40GBASE-SR4 和 10GBASE-SR 光解决方案进行互操作。

功能特性

·符合 CFP2 MSA 标准

·符合100GbE 802.3ba和100GBASE-SR10
·在OM3万兆多模光缆可传输300米,在OM4万兆多模光缆可传输400米
·发射端采用10X 850nm VCSEL激光器阵列
·接收端采用10X PIN光探测器阵列
·最大功耗< 6W
·工作温度 0°C to +70°C
·支持MDIO接口
·光接口采用Male MPO receptacle(24 Fiber)
·支持数字诊断功能

CFP2-100G-LR4

CFP2-100G-LR4

10km OTU4/100G Ethernet CFP2 Optical Transceiver Module (CFP2-100G-LR4),F-tone’s CFP2-100G-LR4 100G CFP2 transceiver modules are designed for use in 100 Gigabit Ethernet and 4x28G OTN client interfaces over single mode fiber. They are compliant with the CFP MSA, IEEE 802.3ba 100GBASE-LR4 and OTU4 4I1-9D1F requirements specified in ITU-T Recommendations G.959.1/G.709 and Supplement 39 (G.sup39).

CFP2-100G-SR10

CFP2-100G-SR10

The CFP2 optical transceiver module are a high performance, low power consumption, short reachinterconnect solution supporting 100G Ethernet and Telecom. It is compliant with the CFP2 MSA and IEEE P802.3ba 100GBASE-SR10. F-tone NetworksCFP2 SR10 modules offer 10 transmit and 10 receive asynchronous channels operating at up to 11.18Gbps per channel.the transmitter side of the module consists of an array of VCSELs (Vertical Cavity Surface Emitting Lasers) and associated circuitry, which converts 10 parallel electrical data inputs to 10 parallel optical data output signals and also converts 10 parallel optical signals into 10 parallel electrical signals through an array of PIN photodiodes and associated circuitry.

Search