标准光模块

  2. 首页
  3. 标准光模块
  4. CFP2光模块
  5. 100G SR10 CFP2 Optical Transceiver

标准协议光模块

兼容协议光模块

其它种类光器件

技术支持

100G SR10 CFP2 Optical Transceiver光模块

100G SR10 CFP2 Optical Transceiver

0.0/5 rating (0 votes)

Specifications

  • 产品型号: CFP2-xxx
  • 兼容品牌: 全系列
  • 封装类型: CFP2
  • 传输速率: 100G SR10
  • 传输距离: 100G SR10 OM3 300m, OM4 400m CFP2 Optical Transceiver
  • 发射波长: 850nm
  • 接收波长: 850nm
  • 工作温度: 商业级0℃～+70℃/工业级-40℃～+85℃ 可选
  • 数字诊断: 带DDM
  • 接收灵敏度: 10 channels PIN photo detector array receiver
  • 接收灵敏度: 10 channels PIN photo detector array receiver

Description

100G CFP2 SR10

100G CFP2 SR10光模块为面向高密度 100G 以太网和光传送网络 (OTN, Optical Transport Network) 应用设计的，该模块提供10 路并行数据通道和支持热插拔，符合 IEEE 802.3ba和100GBASE-SR10，该产品在设计上极大化 100G 网络上的 10G 数据通道传送，并且可与 40GBASE-SR4 和 10GBASE-SR 光解决方案进行互操作。

功能特性

·符合 CFP2 MSA 标准
·符合100GbE 802.3ba和100GBASE-SR10
·在OM3万兆多模光缆可传输300米，在OM4万兆多模光缆可传输400米
·发射端采用10X 850nm VCSEL激光器阵列
·接收端采用10X PIN光探测器阵列
·最大功耗< 6W
·工作温度 0°C to +70°C
·支持MDIO接口
·光接口采用Male MPO receptacle(24 Fiber)
·支持数字诊断功能 

Description

F-toneNetworks 100G CFP2 SR10 is a 10-channel pluggable, multi-mode parallel optic transceiver module designed for high-density 100G Ethernet and Optical Transport Network (OTN), which is designed to maximize the delivery of 10G data channels for modern 100G networks at significantly lower costs than existing industry solutions. The device supports 10x10Gbps Ethernet interconnects.

Features

▪ Compliant to CFP2 MSA standard

▪ 100GbE specifications 802.3ba

▪ (100GBASE-SR10, CAUI ) up to 300m OM3 fiber and 400m OM4 fiber

▪ 10 channels 850nm VCSEL array

▪ 10 channels PIN photo detector array

▪ Power dissipation < 6W

▪ Operating case temperature of 0 °C to 70 °C

▪ MDIO management interface

▪ Utilizes standard 24 lane optical fiber with MPO(MTP) receptacle

▪ Digital Diagnostic

Applications

▪ High-speed core router interlinks

▪ Digital Diagnostic Function and Data Center Aggregation

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

 

 

Related Products

3G SDI SFP收发一体光模块

3G SDI SFP收发一体光模块

北亿纤通专业研发制造3G SDI SFP收发一体光模块,3G SDI SFP单发光纤模块,3G SDI SFP Optical Transceiver,3G SDI SFP Optical Transceiver光模块,3G SDI SFP Optical Transceiver光纤模块,工业级3G SDI SFP收发一体光模块,工业级3G SDI SFP单发光纤模块,工业级3G SDI SFP Optical Transceiver,工业级3G SDI SFP Optical Transceiver光模块,工业级3G SDI SFP Optical Transceiver光纤模块等等全系列3G SDI SFP Optical Transceiver光纤模块,我司生产的3G SDI SFP Optical Transceiver光纤模块可以完美兼容市面上相应光端机等等光视讯类设备。商业级0℃～+70℃/工业级-40℃～+85℃ 可选

Show Details

100G CFP to QSFP28 Adapter

100G CFP to QSFP28 Adapter

100G CFP to QSFP28 Adapter：北亿纤通100G CFP to 100G QSFP28 Adapter转接器实现CFP接口（10X10Gbps）与QSFP28接口（4X25Gbps）双向转换，满足IEEE 802.3ba 100GBASE-LR4和IEEE 802.3bm 100GBASE-SR4协议，最大功耗低于4W，支持前向纠错编码（FEC）、数字诊断（DDM）功能。为100G以太网和电信网提供高性能、热插拔互联方案。 经验证，采用100m OM4多模光纤进行传输，该模块实测功耗低于2.3W，并成功实现4小时连续工作零误码。

Show Details

CFP4-100G-SR4 Optical Transceiver

CFP4-100G-SR4

CFP4-100G-SR4：F-tone Networks’s 100Gb/s transceiver module for optical communication applications compliant to 100GBASE-SR4 of the IEEE P802.3bm standard. The module converts 4 input channels of 25Gb/s electrical data to 4 channels of VCSEL optical signals over 4 multimode fibers for 100Gb/s optical transmission. Reversely, on the receiver side, the module receives 4 channels of VCSEL optical signals over 4 multimode fibers and then converts them to 4 output channels of electrical data.The high speed VCSEL transmitters and high sensitivity PIN receivers provide superior performance for 100Gigabit Ethernet applications up to 100m links over OM4 multimode fibers and compliant to optical interface with IEEE802.3bm Clause 95 100GBASE-SR4 requirements.

Show Details

100G CFP2 LR4

100G LR4 OTU4 CFP2光模块

100G LR4 OTU4 CFP2光模块:兼容CFP2 MSA,符合OTU4,传输距离可达10km,4并联电串行接口和CML信号交流耦合,MDIO实时诊断和控制能力,TX和RX CDR再定时输出输入,工作温度0°C + 70°C,3.3V电源。北亿纤通专业研发生产100G LR4 OTU4 CFP2光模块,工业级100G LR4 OTU4 CFP2光模块,100G LR4 OTU4 CFP2,工业级100G LR4 OTU4 CFP2,是一个专业的100G LR4 OTU4 CFP2光模块厂家,有很好的100G LR4 OTU4 CFP2光模块价格

Show Details

100G CFP LR4 Optical Transceiver

100G CFP LR4 Optical Transceiver

100G CFP LR4 Optical Transceiver：100G CFP LR4光模块支持100GbE和OTU4数据在10km单模光纤上的传输,采用4个EML激光器和PIN接收器组成和波分复用技术将4路不同波长复用在一根光纤上传送，该光模块符合 CFP MSA和IEEE 802.3ba* 100GBASE-LR4。可通过MDIO进行数字监控功能。

功能特性

· 符合CFP MSA 标准
· 支持工作速率103.1Gb/s aggregate bit
· 兼容 OTU4
· 发射端采用4x 25Gb/s LAN-WDM transmitter
· 在单模光缆可传输10km
· 工作温度：商业级0℃～+70℃/工业级-40℃～+85℃ 可选
· 电气接口采用 CAUI electrical interface
· 支持MDIO接口
· 光接口采用双工LC或SC接口
· 采用3.3V电压

 

Show Details

100G CFP SR10

100G CFP SR10

北亿纤通CFP SR10光模块采用MPO多模光纤连接器。内置850nm VCSEL激光器，PIN阵列，集成驱动和接收芯片。支持 100GBase-SR10应用。兼容CFP MSA和IEEE802.3ba 100GBASE-SR10以及CPPI接口等协议。该模块包含两种型号OM3光纤传输100米OM4光纤传输150米和OM3光纤传输300米OM4光纤传输400米。应用于数据中心场景。

功能特性

·符合CFP MSA 标准
·在OM3万兆多模光缆可传输300米，在OM4万兆多模光缆可传输400米
·发射端采用10X 850nmVCSEL激光器阵列
·接收端采用10X PIN光探测器阵列
·最大功耗 < 8W
·工作温度商业级0℃～+70℃/工业级-40℃～+85℃ 可选
·支持MDIO接口
·光接口采用Male MPO(MTP) receptacle(24 Fiber)
·支持数字诊断功能

Show Details

Search