标准协议光模块

兼容协议光模块

其它种类光器件

技术支持

AFBR-83CDZ

AFBR-83CDZ

0.0/5 rating (0 votes)

Description

AFBR-83CDZ

      The Avago AFBR-83CDZ is a 12-channel CXP pluggable optical transceiver module for 100GbE+ applications. The transceiver is optimized for high-speed, short-range data communications. It has 12 data lanes in each direction with an aggregate bandwidth of 150 Gbps. Each lane can operate at 12.5 Gbps up to 50 meters using OM3 fiber and 65 meters using OM4 fiber. The module is designed to operate over multimode fiber systems using a nominal wavelength of 850 nm. The electrical interface uses an 84-contact edge type connector. The optical interface uses a 24-fiber MTP  (MPO) connector. This module incorporates Avago Technologies' proven IC and VCSEL technology to provide reliable long life, high performance, and consistent service.

特征描述：

         符合 SFF-8642：微型多通道系列：集成屏蔽连接器和适用 CXP 接口的 InfiniBand 结构规格 V2 R1.3

  • 每个通道能够达到 11 至 12.5Gbps 多种速率，结合 64b/66b 编码数据用于专有应用
  • 高通道容量：每个模块 150Gbps
  • 热插拔，便于系统安装
  • 使用 OM3 光纤链路距离可达 50 米，使用 OM4 光纤链路距离可达 65 米
  • 0°C 到 70°C 外壳工作温度范围
  • 低功耗：<3.5W
  • 经验证高度可靠的 850nm 技术：Avago VCSEL 阵列发射器和 Avago PIN 阵列接收器
  • 双线串行 (TWS) 接口，具有可屏蔽中断的功能，以便扩展其运行功能，包括：单个通道功能：通道/输出禁用、静噪禁用和通道极性反转
  • 诊断监测功能：模块温度和电源电压、每通道激光电流和激光功率，以及输入接收器功率
  • 每通道状态：发射器故障、电气（发射器）或光学（接收器）LOS，以及警示标
  • 可编程均衡和去加重设置以优化系统性能
  • 配有 MTP® (MPO) 光连接器的标准 24 通道光纤有利于对薄型质轻的高密度线缆进行管理
规格：
      
操作电压： 3.3V
资料速率： 12x12.5 GBd
产品类别： MTPR/MPO
光纤样式： Multimode Glass
最远距离(M)： 65
标称光波长 (nm)： 850
发射器： VCSEL Array

 

       

 

 

Related Products

FT AFBR-79Q2EKZ

AFBR-79Q2EKZ

AFBR-79Q2EKZ
         The Avago AFBR-79Q2EKZ evaluation kit is designed to provide designers with a convenient means of evaluating Avago QSFP/QSFP+ and QSFP+ AOC fiber optic transceiver modules. Designers can evaluate the management interface as well as the electrical and optical performance. A downloadable user guide is available which provides full description of the evaluation kit and graphical user interface (GUI) along with basic operating instructions.
A list of Avago QSFP+ and QSFP+ AOC products supported by the evaluation kit includes (but is not limited to) the following:

Show Details

FT AFBR-8420EVK

AFBR-8420EVK

AFBR-8420EVK

         The Avago AFBR-8420EVK evaluation kit is designed to provide designers with a convenient means of evaluating Avago 100G CFP2 SR10 module. The evaluation kit supports the Avago AFBR-8420Z, a 10-channel pluggable, multi-mode parallel optic transceiver module for high-density 100G Ethernet and Optical Transport Network (OTN) applications.

Show Details

FT AFBR-83PDZ

AFBR-83PDZ

AFBR-83PDZ

        The Avago Technologies AFBR-83PDZ is a Twelve-Channel, Pluggable, Parallel, Fiber-Optic CXP Transceiver for 100 Gigabit Ethernet (100GbE) and 12 x 10G InfiniBand (IB) quadruple data rate (IB-QDR) applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications. It integrates twelve data lanes in each direction with greater than 120 Gbps aggregate bandwidth. Each lane can operate at 10.3125 Gbps up to 100 m using OM3 fiber and 150m using OM4 fiber. These modules are backward compatible to the 12 x 5G IB dual data rate (IB-DDR) and 12 x 2.5G IB single data rate (IB-SDR) applications.

Show Details

FT AFBR-83EDZ

AFBR-83EDZ

AFBR-83EDZ
 
          The Avago AFBR-83EDZ is a 10-channel CXP pluggable optical transceiver module for 100 Gigabit Ethernet applications. The transceiver is optimized for high-speed, short-range data communications. It has 10 data lanes in each direction with greater than 100 Gbps of aggregate bandwidth. Each lane can operate at 10.3125 Gbps up to 100 meters using OM3 fiber and 150 meters using OM4 fiber. The module supports 10G InfiniBand (IB) quadruple data rate (IB-QDR) application and is backward-compatible to the 5 G IB dual data rate (IB-DDR) and 2.5 G IB single data rate (IB-SDR) applications.

Show Details

FT AFBR-8420Z

AFBR-8420Z

 AFBR-8420Z 

          The Avago AFBR-8420Z is a 10-channel pluggable, multi-mode parallel optic transceiver module designed for high-density 100G Ethernet and Optical Transport Network (OTN). The device is designed to maximize the delivery of 10G data channels for 100G networks supporting 100Gbps SR10 and 10x10Gbps Ethernet interconnects per IEEE 802.3ba Clause 86 and 802.3ae Clause 52. Furthermore, the device is interoperable with 40G SR4 and Avago 10G SR optical solutions.

Show Details

Optical Transmit and Receive Subassemblies

Optical Transmit and Receive Subassemblies
 
            Avago&rsquo;s 100Gb/s PM-QPSK Integrated Coherent Receiver integrates signal and local oscillator polarization splitters, two matched 90&deg; optical hybrids, four high speed balanced detector pairs and four differential in/out linear TIAs with manual and automatic gain control in a single compact surface-mount package.
 The receiver makes use of Avago&rsquo;s extensive portfolio of high speed InP based balanced photodetectors (PDs) and Silica Planar Lightguide Circuit (PLC) device technology for the 90&deg; hybrid mixers. It also leverages Avago&rsquo;s automated hybrid integration platform for mounting the balanced PDs directly onto the PLC chip to provide a highly integrated optical hybrid chip for high performance in a very small footprint.

Show Details

Search