标准协议光模块

兼容协议光模块

其它种类光器件

技术支持

AFCT-570xZ

AFCT-570xZ

0.0/5 rating (0 votes)

Description

AFCT-570xZ

      The AFCT-570xZ family of Small Form Factor Pluggable (SFP) LC optical transceivers offers a wide range of design options, including optional DMI features (further described later), two temperature ranges (extended or industrial), and choice of standard or bail delatch. The AFCT-570xZ  family targets applications requiring DMI, while the AFCT-570xZ  family is streamlined for those applications where DMI is not needed.

特征描述：

  • 符合 ROHS-6 标准
  • 可选数字诊断监测
  • AFCT-5701Z 系列：无 DMI
  • AFCT-5705Z 系列：有 DMI
  • 依照 SFF-8472，AFCT-5705Z 系列的诊断功能使得光收发器的诊断监测接口可实时监测：
  • 发射光纤的功率
  • 接收光纤的功率
  • 激光偏压电流
  • 温度
  • 供电电压
  • 符合 IEEE 802.3Z 千兆以太网 (1.25GBd) 1000BASE-LX 标准和 ANSI 光纤通道实体接口 (FC-PI 100-SM-LC-L) 规格
  • 符合小尺寸可插拔 (SFP) 多源协议 (MSA) 的要求
  • 在通过 ISO 9001 认证的工厂进行制造
  • 支持热插拔
  • 温度选项
  • （扩展）-10°C 到 85°C
  • （工业）-40°C 到 85°C
  • 3.3V 直流电源供应
  • 1310nm 长波激光
  • 护眼标准认证：
  • US 21 CFR(J)
  • IEC 60825-1（全部）
  • 适用于 LC 双工光纤连接器
  • 1.0625 GBd 时链路长度：
  • 达 10 千米 - SMF
  • 1.25GBd 时链路长度：
  • 0.5 - 550 米 - 50μm MMF
  • 0.5 至 550 米 - 62.5μm MMF
  • 0.5 米至 10 千米 - SMF

 

规格：

产品类别： LC
光纤样式： Singlemode Glass
最远距离(M)： 10000
标称光波长 (nm)： 1300
发射器： FP Laser

Related Products

FT AFBR-83CDxxZ

AFBR-83CDxxZ

AFBR-83CDxxZ

        The Avago AFBR-83CDxxZ is a pluggable 12-channel, parallel optics CXP Active Optical Cable (AOC) for multi-channel 12.5Gbps proprietary interconnect, 100 Gigabit Ethernet (100GbE) and 12×10G InfiniBand (IB) QDR applications.
 The AFBR-83CDxxZ is designed to operate over multimode fiber systems using a nominal wavelength of 850 nm. The electrical interface uses an 84-contact edge type connector. The AOC incorporates Avago Technologies' proven integrated circuit

Show Details

FT AFBR-79Q2EKZ

AFBR-79Q2EKZ

AFBR-79Q2EKZ
         The Avago AFBR-79Q2EKZ evaluation kit is designed to provide designers with a convenient means of evaluating Avago QSFP/QSFP+ and QSFP+ AOC fiber optic transceiver modules. Designers can evaluate the management interface as well as the electrical and optical performance. A downloadable user guide is available which provides full description of the evaluation kit and graphical user interface (GUI) along with basic operating instructions.
A list of Avago QSFP+ and QSFP+ AOC products supported by the evaluation kit includes (but is not limited to) the following:

Show Details

FT AFBR-8420EVK

AFBR-8420EVK

AFBR-8420EVK

         The Avago AFBR-8420EVK evaluation kit is designed to provide designers with a convenient means of evaluating Avago 100G CFP2 SR10 module. The evaluation kit supports the Avago AFBR-8420Z, a 10-channel pluggable, multi-mode parallel optic transceiver module for high-density 100G Ethernet and Optical Transport Network (OTN) applications.

Show Details

FT AFBR-5710LZ

AFBR-5710LZ

AFBR-5710LZ 

         The Avago AFBR-5710LZ family of gigabit ethernet SFP optical transceivers offers the customer a wide range of design options, including optional DMI features, two temperature ranges (extended or industrial), and choice of standard or bail delatch.

Show Details

FT AFCT-5750ATLZ

AFCT-5750ATLZ

AFCT-5750ATLZ

        The Avago AFCT-5750ATLZ family of SFP optical transceivers for OC12/STM-4 offers many design options, including optional DMI, extended or industrial temperature ranges, and standard push-button or bail delatch.

The AFCT-5750ATLZ family targets applications requiring DMI features, and the AFCT-5750ATLZ family is streamlined for those applications where DMI features are not needed.

Show Details

FT AFCT-5765PZ

AFCT-5765PZ

AFCT-5765PZ

      The Avago AFCT-5765PZ  family of SFP optical transceivers for OC3 applications offer many design options, including optional DMI, extended or industrial temperature ranges, and standard push-button or bail delatch.

The AFCT-5765PZ  family targets applications requiring DMI features, and the AFCT-5765PZ  family is streamlined for those applications where DMI features are not needed.

Show Details

Search