标准协议光模块

兼容协议光模块

其它种类光器件

技术支持

AFBR-79EQDZ

0.0/5 rating (0 votes)

Description

AFBR-79EQDZ

The Avago Technologies AFBR-79EQDZ is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ Transceiver for 40 Gigabit Ethernet (40GbE) application. This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 40 Gbps aggregate bandwidth. Each lane can operate at 10.3125 Gbps up to 100 m using OM3 fiber or 150 m using OM4 fiber. These modules supports 4 x 10G InfiniBand (IB) quadruple data rate (40G-IB-QDR) application and is backward compatible to the 4 x 5G IB dual data rate (20G-IBDDR) and 4 x 2.5G IB single data rate (10G-IB-SDR) applications as well.

特征描述：

  • 符合 IEEE 802.3ba-2010 规定的 40GBASE-SR4 和 XLPPI 规格，并且支持 40G-IB-QDR／20G-IB-DDR／10G-IB-SDR 应用
  • 符合行业标准 SFF-8436 QSFP+ 规格修订版本 3.5
  • 功率级别 1：最大功率 <1.5W
  • 高端口密度：具有 21 毫米的水平端口间距
  • 每个通道可在 10.3125 Gbps 速率下进行运作，并兼容 64b/66b 编码数据以实现 40GbE 应用并可在高达 10 Gbps 的速率下运行，并且兼容 8b/10b 编码数据以实现 40G-IB-QDR 应用
  • 使用 OM3 光纤链路可达 100 米，而使用 OM4 光纤则可达 150 米
  • 根据 IEEE 802.3ae 标准支持与 10GBASE SR 模块进行光学互操作性，但是接收器过载的 10G 模块必须维持达到 2.4 dBm 输入光纤功率
  • 0°C 到 70°C 外壳操作温度范围
  • 卓越可靠的 850nm 技术：Avago VCSEL 并列式发射器和 Avago PIN 并列式接收器
  • 收发器可进行热插拔，方便进行维修和安装
  • 双线串行 (TWS) 接口，具有可屏蔽中断的功能，以便扩展其运行功能
  • 使用一个配有 MTP  (MPO) 光纤连接器的标准 12/8 通道光纤，以便对薄型质轻的高密度电缆进行管理

规格：

逻辑介面： CML
资料速率： 40 Gbps
产品类别： MTPR/MPO
光纤样式： Multimode Glass
最远距离(M)： 150
标称光波长 (nm)： 850
发射器： VCSEL

Related Products

FT AFBR-83EDxxZ

AFBR-83EDxxZ

AFBR-83EDxxZ

       The Avago AFBR-83EDxxZ is a pluggable 10-channel, parallel optics CXP Active Optical Cable (AOC) for multi-channel 10Gbps proprietary interconnect and 100 Gigabit Ethernet (100GbE) applications.

The AFBR-83EDxxZ is designed to operate over multimode fiber systems using a nominal wavelength of 850 nm. The electrical interface uses an 84-contact edge type connector. The AOC incorporates Avago Technologies' proven integrated circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

Show Details

FT AFBR-83CDxxZ

AFBR-83CDxxZ

AFBR-83CDxxZ

        The Avago AFBR-83CDxxZ is a pluggable 12-channel, parallel optics CXP Active Optical Cable (AOC) for multi-channel 12.5Gbps proprietary interconnect, 100 Gigabit Ethernet (100GbE) and 12×10G InfiniBand (IB) QDR applications.
 The AFBR-83CDxxZ is designed to operate over multimode fiber systems using a nominal wavelength of 850 nm. The electrical interface uses an 84-contact edge type connector. The AOC incorporates Avago Technologies' proven integrated circuit

Show Details

FT AFBR-79Q2EKZ

AFBR-79Q2EKZ

AFBR-79Q2EKZ
         The Avago AFBR-79Q2EKZ evaluation kit is designed to provide designers with a convenient means of evaluating Avago QSFP/QSFP+ and QSFP+ AOC fiber optic transceiver modules. Designers can evaluate the management interface as well as the electrical and optical performance. A downloadable user guide is available which provides full description of the evaluation kit and graphical user interface (GUI) along with basic operating instructions.
A list of Avago QSFP+ and QSFP+ AOC products supported by the evaluation kit includes (but is not limited to) the following:

Show Details

FT AFBR-8420EVK

AFBR-8420EVK

AFBR-8420EVK

         The Avago AFBR-8420EVK evaluation kit is designed to provide designers with a convenient means of evaluating Avago 100G CFP2 SR10 module. The evaluation kit supports the Avago AFBR-8420Z, a 10-channel pluggable, multi-mode parallel optic transceiver module for high-density 100G Ethernet and Optical Transport Network (OTN) applications.

Show Details

AFBR-79EQDZ

AFBR-79EQDZ 

 The Avago Technologies AFBR-79EQDZ is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ Transceiver for 40 Gigabit Ethernet (40GbE) applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 40 Gbps aggregate bandwidth. Each lane can operate at 10.3125 Gbps up to 100 m using OM3 fiber or 150 m using OM4 fiber.

Show Details

FT AFBR-79EIPZ

AFBR-79EIPZ

AFBR-79EIPZ
The Avago Technologies AFBR-79EIPZ is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ Transceiver with an integrated push-pull tab for 40 Gigabit Ethernet (40GbE) applications with added capability of inter-operating with IEEE 10GBASE-SR compliant products. It also supports 4 x 10G InfiniBand (IB) quadruple data rate (40G-IB-QDR) application and is backward compatible to the 4 x 5G IB dual data rate (20G-IB-DDR) and 4 x 2.5G IB single data rate  (10G-IB-SDR) applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with each lane operating at 10.3125 Gbps, giving an aggregated bandwidth of 40 Gbps. This transceiver can also be used for high density  10 Gigabit Ethernet application. It Allows optical interoperability with any 10 Gigabit Ethernet (10GbE) transceivers, compliant To the IEEE 802.3ae 10GBASE-SR specifications, of form factors such as SFP+, XFP and X2, to Provide  effective port count of over 100 within 1 RU rack. The push-pull tab facilitates the insertion and extraction of these transceivers in such high density environment. This transceiver is designated as a QSFP+ iSR4 solution, where the letter “i” represents interoperability between this QSFP+ transceiver with any 10GBASE-SR compliant modules.

Show Details

Search