标准协议光模块

兼容协议光模块

其它种类光器件

技术支持

AFBR-79EIPZ

AFBR-79EIPZ

0.0/5 rating (0 votes)

Description

AFBR-79EIPZ
The Avago Technologies AFBR-79EIPZ is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ Transceiver with an integrated push-pull tab for 40 Gigabit Ethernet (40GbE) applications with added capability of inter-operating with IEEE 10GBASE-SR compliant products. It also supports 4 x 10G InfiniBand (IB) quadruple data rate (40G-IB-QDR) application and is backward compatible to the 4 x 5G IB dual data rate (20G-IB-DDR) and 4 x 2.5G IB single data rate  (10G-IB-SDR) applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with each lane operating at 10.3125 Gbps, giving an aggregated bandwidth of 40 Gbps. This transceiver can also be used for high density  10 Gigabit Ethernet application. It Allows optical interoperability with any 10 Gigabit Ethernet (10GbE) transceivers, compliant To the IEEE 802.3ae 10GBASE-SR specifications, of form factors such as SFP+, XFP and X2, to Provide  effective port count of over 100 within 1 RU rack. The push-pull tab facilitates the insertion and extraction of these transceivers in such high density environment. This transceiver is designated as a QSFP+ iSR4 solution, where the letter “i” represents interoperability between this QSFP+ transceiver with any 10GBASE-SR compliant modules.
特征描述：
  • 符合 40GbE IEEE 802.3ba-2010 标准 40GBASE-SR4 和 XLPPI 规格
  • 支持各种不同形式 IEEE 802.3ae 10GBASE-SR 模块，如 SFP+、XFP 和 X2 等的互操作能力
  • 支持 40G-IB-QDR / 20G-IB-DDR / 10G-IB-SDR InfiniBand 应用
  • 符合行业标准 SFF-8436 QSFP+ 规格 3.5 版
  • 功率等级 1：最高功耗低于 1.5W
  • 高连接端口密度：21mm 水平连接端口间距
  • 推拉式拉环简化收发器插入和拉出，拉环前端扣具以绿色色码作为 iSR4 识别
  • 使用 64b/66b 编码数据40GbE / 10GbE 应用每通道 10.3125Gbps，使用 8b/10b 编码数据40G-IB-QDR 应用每通道 10Gbps
  • 使用 OM3 光纤连接距离达到 100 米，OM4 光纤连接距离达到 150 米
  • 0°C 到 70°C 外壳工作温度范围
  • 经验证高信赖性 850nm 技术，使用 Avago VCSEL 阵列发射器和 PIN 阵列接收器
  • 可热插拔收发器提供服务，易于安装
  • 带可屏蔽中断 TWS 两线式串口支持功能扩展
  • 使用带 MTP® (MPO) 标准光学连接器 12/8 通道光纤达到高密度和轻薄光缆管理

Related Products

FT AFBR-83EDxxZ

AFBR-83EDxxZ

AFBR-83EDxxZ

       The Avago AFBR-83EDxxZ is a pluggable 10-channel, parallel optics CXP Active Optical Cable (AOC) for multi-channel 10Gbps proprietary interconnect and 100 Gigabit Ethernet (100GbE) applications.

The AFBR-83EDxxZ is designed to operate over multimode fiber systems using a nominal wavelength of 850 nm. The electrical interface uses an 84-contact edge type connector. The AOC incorporates Avago Technologies' proven integrated circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

Show Details

FT AFBR-83CDxxZ

AFBR-83CDxxZ

AFBR-83CDxxZ

        The Avago AFBR-83CDxxZ is a pluggable 12-channel, parallel optics CXP Active Optical Cable (AOC) for multi-channel 12.5Gbps proprietary interconnect, 100 Gigabit Ethernet (100GbE) and 12×10G InfiniBand (IB) QDR applications.
 The AFBR-83CDxxZ is designed to operate over multimode fiber systems using a nominal wavelength of 850 nm. The electrical interface uses an 84-contact edge type connector. The AOC incorporates Avago Technologies' proven integrated circuit

Show Details

FT AFBR-79Q2EKZ

AFBR-79Q2EKZ

AFBR-79Q2EKZ
         The Avago AFBR-79Q2EKZ evaluation kit is designed to provide designers with a convenient means of evaluating Avago QSFP/QSFP+ and QSFP+ AOC fiber optic transceiver modules. Designers can evaluate the management interface as well as the electrical and optical performance. A downloadable user guide is available which provides full description of the evaluation kit and graphical user interface (GUI) along with basic operating instructions.
A list of Avago QSFP+ and QSFP+ AOC products supported by the evaluation kit includes (but is not limited to) the following:

Show Details

FT AFBR-8420EVK

AFBR-8420EVK

AFBR-8420EVK

         The Avago AFBR-8420EVK evaluation kit is designed to provide designers with a convenient means of evaluating Avago 100G CFP2 SR10 module. The evaluation kit supports the Avago AFBR-8420Z, a 10-channel pluggable, multi-mode parallel optic transceiver module for high-density 100G Ethernet and Optical Transport Network (OTN) applications.

Show Details

FT AFCT-5765TPZ

AFCT-5765TPZ

AFCT-5765TPZ

    The Avago AFCT-5765TPZ  family of SFP optical transceivers for OC3 applications offer many design options, including optional DMI, extended or industrial temperature ranges, and standard push-button or bail delatch.
The  AFCT-5765TPZ  family targets applications requiring DMI features, and the AFCT-5765TPZ  family is streamlined for those applications where DMI features are not needed.

Show Details

FT AFCT-5755TLZ

AFCT-5755TLZ

AFCT-5755TLZ 

      The Avago AFCT-5755TLZ  family of SFP optical transceivers for OC12/STM-4 offers many design options, including optional DMI, extended or industrial temperature ranges, and standard push-button or bail delatch.
The AFCT-5755Z family targets applications requiring DMI features, and the family is streamlined for those applications where DMI features are not needed.

Show Details

Search