标准光模块

标准协议光模块

兼容协议光模块

其它种类光器件

技术支持

Categories starting with S

SFP全国产光模块 (43)

北亿纤通专业研发生产(全国产化可选):SFP全国产光模块, 是一家专业的SFP全国产光模块厂家,具有优质的SFP全国产光模块品质,有很好的SFP全国产光模块价格,SFP全国产光模块海量交付给国防、军工、航空、航天、兵器、舰船、雷达、电子、核工业、军事、电力、铁路、医疗、交通、通信、电信、政府、国防科技工业系统内大专院校及科研院所
SFP全国产光模块

SNAP12光模块 (11)

SNAP12封装系列 产品特性 l 3.5G、6.25G、10G三种典型传输速率 多路信号并行传输 工作温度范围宽、无需额外辅助散热 具有电磁辐射小、抗干扰能力强等特点 广泛应用于光背板传输、并行光互连等
SNAP12光模块

SFP光模块 (348)

我公司专业研发制造SFP光模块。速率:SFP-155M/SFP-622M/SFP-1.25G/SFP-2.5G/SFP-3.125G/SFP-4.25G/SFP多速率;收发模式:单纤双向/双纤双向/双发双收/单发单收;波长:850nm/1310nm/155nm/CWDM/DMDM可选;传输距离:0~160KM可选;工作温度:商业级0℃~+70℃/工业级-40℃~+85℃可选
SFP光模块

1.25G SFP (126)

S6矩形连接器 (1)

S6矩形连接器 产品介绍 符合ARINC600标准;采用六方编码防错,具有99个防错键位;外壳体可选用不同材料及镀层以适应不同环境要求;可将普通低频、电源、高频、高速差分和光接触件进行混装,实现信号集成传输;采用模块化结构设计,用户可根据使用要求选择不同的模块组合;标准8#射频接触件使用频率0~500MHz,浮动8#射频接触件使用频率0~18GHz
S6矩形连接器

S7矩形连接器 (1)

S7矩形连接器 产品介绍 符合MIL-DTL-83527B标准;采用六方编码防错,具有99个防错键位; 外壳体可选用不同材料及镀层以适应不同环境要求; 可将普通低频、电源、高频、高速差分和光接触件进行混装,实现信号集成传输;采用模块化结构设计,用户可根据使用要求选择不同的模块组合;标准8#射频接触件使用频率0~500MHz,浮动8#射频接触件使用频率0~18GHz
S7矩形连接器

SGMII SFP (10)

SGMII SFP是专为100BASE-FX应用,建立在支持SGMII接口的PHY器件。标准串行ID信息兼容SFP MSA的收发功能、标准接口、制造商和其他信息。主机设备可以访问这些信息通过2线串行CMOS EEPROM的协议。如需进一步信息,请参阅SFP多源协议(MSA)。
SGMII SFP

SFP+光模块 (318)

SFP+ 10GBASE-SR 300米(多模OM3光纤); SFP+ 10GBASE-LRM 多模光纤 220米; SFP+ 10GBASE-LR 单模光纤 10-20公里; SFP+ 10GBASE-ER 单模光纤 40公里; SFP+ 10GBASE-ZR 单模光纤 80公里; SFP+ 10GBASE-EZR 单模光纤 120公里;
SFP+光模块

SFF光模块 (88)

F-tone small form-factor (SFF) is a compact optical transceiver used in optical communications for both telecommunication and data communications applications. It is a popular industry format supported by several fiber optic component vendors. SFF transceivers are designed to support SONET/SDH, Gigabit Ethernet, Fibre Channel, and other communications standards.
SFF光模块

SFP-DD光模块 (2)

SFP-DD光模块,SFP-DD光纤模块,SFP-DD高速光模块,SFP-DD高速光纤模块: 旨在制定高速、双密度小尺寸可插拔(SFP-DD)接口的规范。计划打造一款针对50Gbps和100Gbps数据中心网络应用的双密度SFP尺寸光模块。该光模块将根据数据速率使用NRZ或PAM4调制,会利用25Gbps NRZ或者56Gbps PAM4电接口,并通过一对传输线支持50Gbps,112Gbps的应用。SFP-DD的首个市场目标是服务器端,配合交换机侧的QSFP-DD,实现总端口密度的翻倍。基于SFP-DD规范的网络设备将支持传统SFP模块和线缆,以及新型双倍密度产品
SFP-DD光模块

SFP28光模块 (142)

北亿纤通SFP28光模块主力参与者,助力全球光互联应用,SFP28光模块有:SFP28 SR,SFP28 LR 10km,SFP28 ER 40km,SFP28 BIDI光模块,SFP28 CWDM光模块,SFP28 DWDM光模块等全系列SFP28光模块。
SFP28光模块

SNAP12光模块 (16)

SNAP12光模块:12路并行光发送模块和接收模块为甚短距离的高速数据处理和传输提供高可靠的多路数据链接,解决了数据传输的瓶颈问题。SNAP12并行光模块为系统提供了低成本、高密度的数据传输方案。SNAP12并行光模块由12路独立的光通道组成,每通道可提供高达10Gbps的传输数据率,在OM3标准的多模光纤中,传输距离可达到300米以上。SNAP12并行光模块的工作光波长为850nm,40Gbps为单通道速率3.5Gbps,60Gbps为单通道速率5Gbps,75Gbps为单通道速率6.25Gbps,120Gbps为单通道速率10Gbps。SNAP12并行光模块适应各种严酷的工作条件,工作温度范围宽、耐潮湿、抗振动、抗电磁干扰,可广泛应用于车载、机载、舰载、高海拔等环境。产品有商业级、工业级和军品级多个质量等级可供选择。模块提供了与 I2C 协议相兼容的两线串行数据端 口,提供模块内的各种监控和状态信号,通过软件升级,可为用户提供更多的功能。
SNAP12光模块

SMA测试线缆 (18)

北亿纤通专业研发生产各种SMA测试线缆
SMA测试线缆

Items starting with S

SGMII SFP Transceiver

SGMII SFP Transceiver

  1.  Connection Gigabit Ethernet To Fast Ethernet
  2.  Switch to Switch interface
  3.  Switched backplane applications
  4.  Router/Server interface

SGMII SFP

SGMII SFP光模块

SGMII SFP is designed for 100BASE-FX applications, with build-in PHY device supporting SGMII interface. The standard serial ID information Compatible with SFP MSA describes the transceiver’s capabilities, standard interfaces, manufacturer and other information. The host equipment can access this information via the 2-wire serial CMOS EEPROM protocol. For further information, please refer to SFP Multi-Source Agreement (MSA). SGMI SFP transceivers are 100BASE-FX Small Form-Factor Pluggable (SFP) Fast Ethernet Interface Converter on Gigabit SFP Ports.

SGMII-SFP-SERIES

SGMII SFP全系列光模块

F-tone SGMII SFP is designed for 100BASE-FX applications, with build-in PHY device supporting SGMII interface. The standard serial ID information Compatible with SFP MSA describes the transceiver’s capabilities, standard interfaces, manufacturer and other information.

SGMII-SFP-20KM

SGMII-SFP-20KM

  • Package Type: SGMII SFP 125M  850nm/1310nm
  • Fiber Types: 50/125nm MMF/ 62.5/125nm MMF/SMF
  • Fiber Connector Type: Duplex LC
  • Transmission Mode: Half duplex or full duplex
  • Transmission Distance: 2km,10km,20km

SGMII-SFP-2KM

SGMII-SFP-2KM

F-tone SGMII-SFP-2km is designed for 100BASE-FX applications, supporting distance from 0.5m to 2km on MMF with build-in PHY device supporting SGMII interface.
The optical output can be disabled by a TTL logic high-level input of Tx Disable. Tx Fault is provided to indicate that degradation of the laser.

Single-Mode 9/125 LC Fiber Loopback Cable

Single-Mode 9/125 LC Fiber Loopback Cable

Single-Mode 9/125 LC Fiber Loopback Cable

● Connector : LC/PC
● Single-mode 9/125um
● Warranty: 1-Year
● F-tone Networks made in China

Single-Mode, 800G, 8×100G QSFP-DD With Dual MPO-12 interface

Single-Mode, 800G, 8×100G QSFP-DD With Dual MPO-12 interface

Single-Mode, 800G, 8×100G QSFP-DD With Dual MPO-12 interface

Product Description
F-tone Networks's QSFP-DD 8x100Gbps transceiver module can be used for 800 Gigabit Ethernet connections over 2km of single-mode fiber. The module includes eight parallel channels with a central wavelength of 1310nm, and the operating rate of each channel is 106.25Gbps. 

Single-Mode, 800G, 8×100G QSFP-DD With MPO-16 interface

Single-Mode, 800G, 8×100G QSFP-DD With MPO-16 interface

Single-Mode, 800G, 8×100G QSFP-DD With MPO-16 interface

Product Description
F-tone Networks's QSFP-DD 8x100Gbps transceiver module can be used for 800 Gigabit Ethernet connections over 2km of single-mode fiber. The module includes eight parallel channels with a central wavelength of 1310nm, and the operating rate of each channel is 106.25Gbps. 

Single-Mode, 800G, 8×100G QSFP-DD With MPO-16 interface, 500m

Single-Mode, 800G, 8×100G QSFP-DD With MPO-16 interface, 500m

Single-Mode, 800G, 8×100G QSFP-DD With MPO-16 interface, 500m

Product Description
F-tone Networks's QSFP-DD 8x100Gbps transceiver module can be used for 800 Gigabit Ethernet connections over 500m of single-mode fiber. The module includes eight parallel channels with a central wavelength of 1310nm, and the operating rate of each channel is 106.25Gbps. 

Single-Mode, 800G, QSFP-DD800 With AOC interface

Single-Mode, 800G, QSFP-DD800 With AOC interface

Single-Mode, 800G, QSFP-DD800 With AOC interface

Product Description
F-tone Networks’s QSFP-DD800 AOC is designed for use in 800 Gigabit Ethernet links up to 30m. Each of AOC modules consists of 8 independent electrical input/output channels which can converts 106.25Gbps (PAM4) electrical input data to 8 channels of 106.25Gbps (PAM4) parallel optical signals,

Single-Mode,8×100G QSFP-DD With Dual MPO-12 interface,10km

Single-Mode,8×100G QSFP-DD With Dual MPO-12 interface,10km

Single-Mode,8×100G QSFP-DD With Dual MPO-12 interface,10km

Product Description
F-tone Networks's QSFP-DD 8x100Gbps transceiver module can be used for 800 Gigabit Ethernet connections over 10km of single-mode fiber. The module includes eight parallel channels with a central wavelength of 1310nm, and the operating rate of each channel is 106.25Gbps.

Single-Mode,8×100G QSFP-DD With MPO-16 interface,10km

Single-Mode,8×100G QSFP-DD With MPO-16 interface,10km

Single-Mode,8×100G QSFP-DD With MPO-16 interface,10km

Product Description
F-tone Networks's QSFP-DD 8x100Gbps transceiver module can be used for 800 Gigabit Ethernet connections over 10km of single-mode fiber. The module includes eight parallel channels with a central wavelength of 1310nm, and the operating rate of each channel is 106.25Gbps. 

Single-Mode,8×100G-LR, QSFP-DD With MPO-16 interface,10km

Single-Mode,8×100G-LR, QSFP-DD With MPO-16 interface,10km

Single-Mode,8×100G-LR, QSFP-DD With MPO-16 interface,10km

Product Description
F-tone Networks’s QSFP-DD 8*100 Gbps transceiver module is designed for use in 800 Gigabit Ethernet links over 10km single mode fiber. This product has 8 independent electrical input/output channels which can converts 106.25Gbps (PAM4) electrical input data to 8 channels of 106.25Gbps (PAM4) parallel optical signals, 

SMA905 POF塑料光纤跳线

SMA905 POF塑料光纤跳线

SMA905 POF塑料光纤跳线

产品描述:
SMA905塑料光纤跳线是具有1/4-36-UNS螺纹锁紧机构和标称直径为3.175mm圆柱形套管,采用螺纹锁紧设计,连接更牢固,抗震动和防脱落。插芯和螺帽采用优质不锈钢材质,精度高,硬度强,防老化和腐蚀.

SMA905激光光纤传能跳线

SMA905激光光纤传能跳线

SMA905激光光纤传能跳线

产品介绍
采用高精度SMA905光纤接头或端头带空气间隙保护的改进型SMA-905金属连接头,装配端面精磨的大芯径能量光纤,可以满足一般半导体激光器/模块及中低功率固体激光器的输出能量激光传输,连接头内部可采用无胶工艺的环保护工艺,进一步提增能量光纤散热效果和使用寿命,满足激光焊接、切割较高功率传输使用需求。

<<  11 12 13 14 15 [1617 18 19  >>  

Search