F-tone CFP-40G-10KM, CFP-40G-20KM, CFP-40G-40KM 40G CFP transceiver modules are designed for use in 40 Gigabit Ethernet links over single mode fiber. They are compliant with the CFP MSA1 and IEEE 802.3ba 40GBASE-LR4, 40GBASE-ER4. Digital diagnostics functions are available via an MDIO interface, as specified by the CFP MSA.

SNAP12 Parallel Transmitter Module:F-tone's SNAP12 transmitter module is designed to be used in links of up to 32Gb/s over multimode fiber.  They are RoHS-6 compliant and lead-free per Directive 2002/95/EC and F-tone Application Note an38.

The F-tone CXP-100G-150XX is a 10-channel CXP pluggable optical transceiver module for 100 Gigabit Ethernet applications. The transceiver is optimized for high-speed, short-range data communications. It has 10 data lanes in each direction with greater than 100 Gbps of aggregate bandwidth. Each lane can operate at 10.3125 Gbps up to 100 meters using OM3 fiber and 150 meters using OM4 fiber. 

The F-tone CXP-150G-XX is a 12-channel CXP pluggable optical transceiver module for 100GbE+ applications. The transceiver is optimized for high-speed, short-range data communications. It has 12 data lanes in each direction with an aggregate bandwidth of 150 Gbps. Each lane can operate at 12.5 Gbps up to 50 meters using OM3 fiber and 65 meters using OM4 fiber.

SNAP12 4发4收光模块：8路并行光发送模块和接收模块为甚短距离的高速数据处理和传输提供高可靠的多路数据链接， 解决了数据传输的瓶颈问题。为系统提供了低成本、高密度的数据传输方案。SNAP12 4发4收光模块由8路独立的光通道组成，每通道可提供高达3.5Gbps的传输数据率， 在OM3标准的多模光纤中，传输距离可达到300米以上。SNAP12 4发4收光模块的工作光波长为850nm，28Gbps为单通道速率3.5Gbps，40Gbps为单通道速率5Gbps，50Gbps为单通道速率6.25Gbps，80Gbps为单通道速率10Gbps。模块适应各种严酷的工作条件，工作温度范围宽、耐潮湿、抗振动、抗电磁干扰，可广泛应用于车载、机载、舰载、高海拔等环境。产品有商业级、工业级和军品级多个质量等级可供选择。模块提供了与 I2C 协议相兼容的两线串行数据端口，提供模块内的各种监控和状态信号，通过软件升级，可为用户提供更多的功能。

Features

• Full duplex 12 channels 850nm parallel active optical cable            
• Transmission data rate up to 10.3Gb/s per channel
• Hot pluggable electrical interface
• Differential AC-coupled high speed data interface
• 12 channels 850nm VCSEL array
• 12 channels PIN photo detector array
• Multi-mode optical fibre cable of up to 300m(OM3) or 400m(OM4)
• Low power consumption < 2W
• Operating case temperature

Standard :  0 to +70°C

Industrial : -40 to +85°C

• 3.3V power supply voltage
• RoHS 6 compliant

Applications

• Infiniband transmission at 12ch SDR, DDR and QDR
• Switches, Routers
• Data Centers
• Other 120G Interconnect Requirement

Description

CXP-CXP active optic cables are a high performance, low power consumption, long reach interconnect solution supporting 120G Ethernet, fiber channel and PCIe. It is compliant with the 120Gbits Small Form factor Hot-Pluggable CXP-interface. F-tone CXP AOC is an assembly of 12 full-duplex lanes, where each lane is capable of transmitting data at rates up to 10Gb/s, providing an aggregated rate of 120Gb/s.