400G QSFP56 DD SR8 Optical Transceiver Module

Description
The F-tone Networks FTQD-4H-SR8xx-B is a Eight-Channel, Pluggable, Parallel, Fiber-Optic QSFP Double Density for 2x200 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnection applications.

400GBASE-ER8 QSFP-DD光模块

产品简介
400GBASE-ER8 模块通过一对带双工 LC 连接器的标准 G.652 单模光纤支持长达 40 km的链路长度。它符合 IEEE 802.3cn 协议和 400GAUI-8、QSFP-DD HW Rev 5.0 和 QSFP-DD CMIS Rev 4.0 标准。 400 吉比特以太网信号通过八个波长传输。八个波长的复用和解复用在设备内进行管理。

400GBASE-FR4 QSFP-DD光模块

产品简介
400GBASE-FR4 模块使用双工 LC 连接器支持最长 2km 单模 的链路长度。它符合 IEEE 802.3bs、100G波长 MSA 组的 400GBASE-FR4 规范和 400GAUI-8/CEI-56G-VSR-PAM4 标准。 400 吉比特以太网信号通过四个 CWDM 网格光波长传输。四个波长的复用和解复用在设备内进行管理。

400GBASE-LR4L QSFP-DD光模块

产品简介
这款400GBASE-LR4L模块采用双工LC连接器，在并行单模光纤上可实现高达6km的传输距离。符合QSFP-DD CMIS Rev 4.0和IEEE 802.3 400GAUI-8标准。内置数字诊断监测（DDM）功能，可实时监测操作参数。适用于400G以太网和数据中心互连应用。

400GbE to 2x200GbE (QSFP56-DD to 2xQSFP56) MMF Active Optical Splitter Cable

Description
F-tone Networks’s FTQD-4H-2Q5-Oxxx MMF Active Optical Splitter Cable is used in 2 X 200 Gigabit Ethernet links over OM3/OM4/OM5 multimode fiber, which provides connectivity between system units with a 400GbE connector on one side and two separate 200GbE connectors on the other two sides. 

40G QSFP Electrical Passive Loopback

Product Description
QSFP/QSFP+ Passive Electrical Loopback is used for testing QSFP/QSFP+ transceiver ports in board level test. By substituting for a full-featured QSFP/ QSFP+ transceiver, the electrical loopback provides a cost-effective low loss method for QSFP/QSFP+ port testing.

40G QSFP+ LR4 10km, Pull-Tab (FTCQ-4X-LR4xx)

Description
The FTCQ-4X-LR4xx is a 4x10G hot pluggable optical transceiver. The F-tone Networks technology enables the integration of 4 transmitters, 4 receivers and an optical MUX/DeMUX with AAWG into a small form factor package that delivers a 40 Gbps data link in a compact QSFP footprint.