标准光模块

  2. 首页
  3. 标准光模块
  4. Components for Fiber Laser
  5. FT (2 + 1) × 1 Multimode Pump & Signal Combiner

标准协议光模块

兼容协议光模块

其它种类光器件

技术支持

(2 + 1) × 1 Multimode Pump & Signal Combiner

FT (2 + 1) × 1 Multimode Pump & Signal Combiner

0.0/5 rating (0 votes)

Description

 (2 + 1) × 1 Multimode Pump & Signal Combiner, 1.0μm Fiber Laser

● High Coupling Efficiency

● High Signal Transfer Efficiency 
● Wide Wavelength Range
● Proprietary Pull and Package Technique

● Custom Configurations Available

Specifications

Parameter

Unit

Value

Product Type

(2+1)×1

Pump Wavelength Range

nm

900 - 1000

Signal Wavelength Range

nm

1060 or 1550

Fiber Type for Input (Pump Channel)

105/125 (0.15 NA or 0.22 NA)

Fiber Type for Input (Signal Channel)

10/125 DCF, 20/130 DCF

Fiber Type for Output

10/125 DCF, 20/130 DCF

Signal Channel Insertion Loss

dB

< 0.50

Typ. Pump Efficiency

%

94

Min. Pump Efficiency

%

92

Max. Input Pump Power

W

2 × 5

2 × 30

Package Dimensions

mm

P1: 50 (L) × 5 (W) × 5 (H)

P2: 70 (L) × 12 (W) × 8 (H)

Operating Temperature

℃

0 to +65

Storage Temperature

℃

-40 to +85

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

Related Products

Fanout MPO/APC-SC/UPC单模12芯光纤跳线

Fanout MPO/UPC-LC/UPC单模24芯光纤跳线

    MPO光纤跳线，MPO(Multi-fiberPushOn)连接器为MT系列连接器之一，MT系列的插芯都采用插芯端面上左右两个直径为0.7mm的导引孔与导引针（又叫PIN针）进行精准连接。MPO连接器与光纤光缆加工后可生产出各种形式的MPO跳线。MPO跳线可以有2~12芯设计，最多可以是24芯，目前使用最多的是12芯的MPO连接器。

Show Details

Fanout MPO/APC-LC/UPC单模12芯光纤跳线

1U 高密度光纤配线箱

                MPO光纤跳线，MPO(Multi-fiberPushOn)连接器为MT系列连接器之一，MT系列的插芯都采用插芯端面上左右两个直径为0.7mm的导引孔与导引针（又叫PIN针）进行精准连接。MPO连接器与光纤光缆加工后可生产出各种形式的MPO跳线。MPO跳线可以有2~12芯设计，最多可以是24芯，目前使用最多的是12芯的MPO连接器。MPO连接器的紧凑设计，使MPO跳线芯数多，体积小。MPO跳线被广泛应用于在布线过程中需要高密度集成光纤线路环境中，FTTX及40/100GSFP、SFP+等收发模块或设备内外部的连接应用。
               MPO带分支器跳线等形式的MPO跳线产品，皆符合Telcordia-GR-326、IEC标准及Rohs要求。MPO光纤跳线的应用企业的不同楼宇之间局域网布线光有源设备中光链路互连通信基站内布线，配线箱内布线居民小区，工业园机房，商业大楼机房内光信号连接楼宇密集布线系统光纤通信系统，有线电视网，电信网络局域网(LANs)、广域网(WANs)、FTTX

Show Details

Fanout MPO/APC-LC/APC单模12芯光纤跳线

Fanout MPO/APC-LC/APC单模12芯光纤跳线

    MPO光纤跳线，MPO(Multi-fiberPushOn)连接器为MT系列连接器之一，MT系列的插芯都采用插芯端面上左右两个直径为0.7mm的导引孔与导引针（又叫PIN针）进行精准连接。MPO连接器与光纤光缆加工后可生产出各种形式的MPO跳线。MPO跳线可以有2~12芯设计，最多可以是24芯，目前使用最多的是12芯的MPO连接器。

Show Details

FT 1064nm Isolator PBC/PBS

FT 1064nm Isolator PBC/PBS

1064nm Isolator PBC/PBS

The 1064nm Isolator Polarization Beam Combiner/Splitter is a compact device which provides both polarization beam combining and optical isolation function in one integrated device. The most common application is to combine the light of two pump lasers into a single fiber to double the pump power.

Show Details

FT (6 + 1) × 1 Multimode Pump & Signal Combiner

FT (6 + 1) × 1 Multimode Pump & Signal Combiner

(6 + 1) × 1 Multimode Pump & Signal Combiner, 1.0μm Fiber Laser

● High Coupling Efficiency

● High Signal Transfer Efficiency
● Wide Wavelength Range

● Proprietary Pull and Package Techniqu

● Custom Configurations Available

● Fiber Laser and Amplifiers

● CATV Amplifier

● Pump Combiner with Signal 

Show Details

FT 1064nm PBC/PBS, Fiber Laser

FT 1064nm PBC/PBS, Fiber Laser

1064nm PBC/PBS, Fiber Laser

The 1064nm Polarization Beam Combiner/Splitter is a compact high performance lightwave component that combines two orthogonal polarization signals into one output fiber. The most common application is to combine the light of two pump lasers into one single fiber to double the pump power. The typical configuration uses two PM fibers as input and SM fiber as output. The device can also be used as a beam splitter.

Show Details

Search