F-tone Networks's DWDM XFP 40/80km Small Form Factor 10Gb/s transceivers comply with the current XFP Multi-Source Agreement (MSA) Specification. They support DWDM 10Gb/s SONET/SDH, DWDM 10-Gigabit Ethernet and 10-Gigabit Fibre Channel applications.
F-tone Networks's FT-77-XF15-192-80 series single mode transceiver is small form factor pluggable module for duplex optical data communications such as 10GBASE-ZR/ZW defined by IEEE 802.3ae. It is with the XFP 30-pin connector to allow hot plug capability.
XFP-CABLE-XX Copper XFP Cable assemblies are high-performance, cost effective I/O solutions for 10 GB Ethernet and 10G Fiber Channel applications. XFP copper modules allow hardware manufacturers to achieve high port density, configurability and utilization at a very low cost and to reduce power budget.
XFP 产品 10 Gigabit Small Form Factor Pluggable system of modules and interconnects that convert serial electrical signals to external serial optical or electrical signals
The XFP module is compliant with the 10G Small Form-Factor Pluggable (XFP) Multi-Source Agreement (MSA), supporting data-rate of 8.0~11.1Gbps, and transmission distance up to 20km on SMF.
The XFP module is compliant with the 10G Small Form-Factor Pluggable (XFP) Multi-Source Agreement (MSA), supporting data-rate of 8.0~11.1Gbps, and transmission distance up to 20km on SMF.
Supports 9.95Gb/s to 11.1Gb/s bit rates Hot-pluggable XFP footprint Maximum link length of 10km with SMF 1310nm Uncooled DFB laser XFP MSA package with duplex LC connector No reference clock required Compatible with RoHS +3.3V +1.8V power supply Power dissipation <2.5W Built-in digital diagnostic functions Operating temperature: 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
Features XFP MSA Rev 4.5 Compliant Data rate from 9.95Gbps to 11.3Gbps Cooled EML with isolator APD receiver link length up to 120km (with amplifier) Low Power Dissipation 3.5W Maximum XFI and lineside loopback Mode Supported Operating Case Temperature:商业级0℃~+70℃/工业级-40℃~+85℃ 可选 Diagnostic Performance Monitoring of module temperature, Supply Voltages, laser bias current, transmit optical power, and receive optical power RoHS compliant (lead free)
Features Supports 10GBE Application at the Data-Rate of 9.953Gbps to 10.3125Gbps Maximum link length of 40km with SMF 1550nm cooled EML laser and PIN photodiode XFP MSA package with duplex LC connector XFI High Speed Electrical Interface +5V, +3.3V,+1.8V power supply Low Power Dissipation 3.5W Maximum 2-wire interface for management and diagnostic monitor Compatible with RoHS Compatible with IEEE 802.3ae 10 Gigabit Ethernet Compatible with Sonet OC-192/SDH STM-64
Features XFP MSA Compliant data rate from 9.95 Gbps to 11.1Gbps No Reference Clock required Cold Start up Wavelength Compliance EML transmitter and APD receiver link length up to 80km Low Power Dissipation 3.5W Maximum Operating Case Temperature:商业级0℃~+70℃/工业级-40℃~+85℃ 可选 Diagnostic Performance Monitoring of module temperature, supply Voltages, laser bias current, transmit optical power, receive optical power RoHS compliant and lead free
Supports 9.95Gbps to 10.5Gbps bit rates Maximum link length of 300m (50um,MMF,2000MHz.Km) 850nm VCSEL laser and PIN receiver Low power consumption <1.5W +3.3V +1.8Vpower supply XFP MSA package with duplex LC connector XFI electrical interface No reference clock required Compatible with RoHS Excelllent EMI performance Built-in digital diagnostic functions Temperature range: 0℃ to +70℃ High reliability
F-tone Networks’s XFP-OA Optical Amplifier is an Erbium-Doped Fiber Amplifier (EDFA) in a small form factor hot-pluggable optical module. It amplifies optical signals to enable long Hybrid Fiber Coaxial links and/or high optical splitting for RF-over-Glass architectures. The optical output power, which is settable by the user, is kept constant through an active feedback loop.
The XFP-OA can be paired with F-tone Networks’s wavelength-tunable XFP-RF Transmitters for single wavelength applications or Dense Wavelength Division Multiplexing (DWDM) up to 8 wavelengths. It installs into the same F-tone Networks XFP-RF host system so it can be monitored and controlled through embedded Web Browser Graphical User Interface or through a network management system.
The F-tone NetworksFT-PLGX1-01A transceiver consists 1577nm DFB EML laser, 1270nm APD photodiode WDM filter and Preamplifier in a high-integrated optical sub-assembly for 2.5G upstream and 10G downstream GPON applications up to 20km.
XG-PON1 ONU SFP+ transceiver modules are designed for use in XG-PON1 links on up to 20km of single mode fiber. They are compliant with the ITU-T G.987.2 and applicable portions of SFF-8432.The optical transceiver is RoHS compliant.