标准光模块

标准协议光模块

兼容协议光模块

其它种类光器件

技术支持

标准光耦

标准光耦

北亿纤通专业研发生产各种光藕,工业级光藕,军品级光藕

高速光藕

  • 高速率:10MBit/s
  • 共模瞬变抑制5kV/μs@ VCM=1000V
  • 保证性能工作温度范围:-40℃~85℃
  • 最大输入电流:5mA
  • 输入输出间高隔离电压(Viso=5000Vrms)
  • 符合 RoHS 标准
  • 与市面同类产品完全兼容

驱动光耦

2.5A最大输出峰值电流
2.0A最小输出峰值电流
共模瞬变抑制15kV/μs@ VCM=1500V
输出低电平最大0.5V
供电电流最大5mA
带迟滞的欠压锁定保护
宽电源电压工作范围:15V~30V
开关速度最大500ns
输入阈值电流最大5mA
工作温度范围:-40℃~100℃

FT-80-CS0600

FT-80-CS0600

FT-80-CS0600

产品简介
FT-80-CS0600作为通用工业控制数据链路中隔离和驱动级,适用于需要低功耗、低成本的解决方案。FT-80-CS0600与市面上同类型光耦产品完全 兼容,最大工作速率可达10MBd,共模瞬变抑制可达5kV/μs@ VCM=1000V,能够帮助用户在高速传输数据的同时解决电压隔离和绝缘、抗 EMI干扰以及数据安全等问题。

FT-80-CS3120

FT-80-CS3120

FT-80-CS3120

产品介绍
FT-80-CS3120作为通用工业控制数据链路中隔离和驱动级,适用于需要低功耗、低成本的解决方案。FT-80-CS3120与市面上同类型光耦产品完全兼容,最大驱动电流可达2.5A,共模瞬变抑制可达15kV/μs @ VCM=1500V,能够帮助用户在驱动后级的同时解决电压隔离和绝缘、抗EMI干扰以及数据安全等问题。

FT-88-0601

FT-88-0601

FT-88-0601

The FT-88-0601 devices each consists of an infrared emitting diode optically coupled to a high speed integrated photo detector logic gate with a strobable output.The devices are packaged in an 8-pin small outline package which conforms to the standard SO8 footprint.

兼容安华高ACPL-332J

兼容安华高ACPL-332J

兼容安华高ACPL-332J

Description
The ACPL-332J optocoupler is an advanced 2.5 A output current, easy-to-use, intelligent gate driver which makes IGBT VCE fault protection compact, affordable, and easy-to implement. 

兼容安华高ACPL-333J

兼容安华高ACPL-333J

兼容安华高ACPL-333J

The ACPL-333J optocoupler is an advanced 2.5 A output current, easy-to-use, intelligent gate driver which makes IGBT VCE fault protection compact, affordable, and easy-to implement. 

兼容安华高ACPL-337J

兼容安华高ACPL-337J

兼容安华高ACPL-337J

The ACPL-337J is a fully featured 4.0A smart gate drive optocoupler device capable of driving high power MOSFET or IGBT directly. The device features rail-to-rail output with high current, integrated LED driver, active Miller clamp, high desaturation (DESAT) blanking current source, and Under Voltage Lock-Out (ULVO) feedback control circuit, providing a complete cost-effective gate drive solution for motor control and power inverter applications.

兼容安华高ACPL-C790

兼容安华高ACPL-C790

兼容安华高ACPL-C790

The ACPL-C79X evaluation boards can accommodate either a ACPL-C79B (0.5% tolerance), ACPL-C79A (1% tolerance), or ACPL-C790 (3% tolerance) device on U1, to demonstrate the high linearity and low offset capability of Broadcom’s Isolation Amplifier over a wide range of input current conditions.

兼容安华高ACPL-C79A

兼容安华高ACPL-C79A

兼容安华高ACPL-C79A

The ACPL-C79X evaluation boards can accommodate either a ACPL-C79B (0.5% tolerance), ACPL-C79A (1% tolerance), or ACPL-C790 (3% tolerance) device on U1, to demonstrate the high linearity and low offset capability of Broadcom’s Isolation Amplifier over a wide range of input current conditions.

兼容安华高ACPL-C79B

兼容安华高ACPL-C79B

兼容安华高ACPL-C79B

The ACPL-C79X evaluation boards can accommodate either a ACPL-C79B (0.5% tolerance), ACPL-C79A (1% tolerance), or ACPL-C790 (3% tolerance) device on U1, to demonstrate the high linearity and low offset capability of Broadcom’s Isolation Amplifier over a wide range of input current conditions.

兼容安华高ACPL-C870

兼容安华高ACPL-C870

兼容安华高ACPL-C870

The ACPL-C87B/C87A/C870 voltage sensors are optical isolation amplifiers designed specifically for voltage sensing. Its 2V input range and high 1GΩ input impedance, makes it well suited for isolated voltage sensing requirements in electronic power converters applications including motor drives and renewable energy systems. 

兼容安华高ACPL-C87A

兼容安华高ACPL-C87A

兼容安华高ACPL-C87A

The ACPL-C87B/C87A/C870 voltage sensors are optical isolation amplifiers designed specifically for voltage sensing. Its 2V input range and high 1GΩ input impedance, makes it well suited for isolated voltage sensing requirements in electronic power converters applications including motor drives and renewable energy systems. 

兼容安华高ACPL-C87B

兼容安华高ACPL-C87B

兼容安华高ACPL-C87B

The ACPL-C87B/C87A/C870 voltage sensors are optical isolation amplifiers designed specifically for voltage sensing. Its 2V input range and high 1GΩ input impedance, makes it well suited for isolated voltage sensing requirements in electronic power converters applications including motor drives and renewable energy systems. 

兼容安华高ACPL-P341

兼容安华高ACPL-P341

兼容安华高ACPL-P341

The ACPL-P341/ACPL-W341 gate drive optocoupler contains an AlGaAs LED, which is optically coupled to an integrated circuit with a power output stage. This gate drive optocoupler is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications.

兼容安华高ACPL-P343

兼容安华高ACPL-P343

兼容安华高ACPL-P343

The ACPL-P34X/W34X evaluation board allows a power inverter designer to easily test the drive, rail-to-rail and speed capability of the ACPL-P343/W343 gate drive optocoupler. 

兼容安华高ACPL-W341

兼容安华高ACPL-W341

兼容安华高ACPL-W341

The ACPL-P341/ACPL-W341 gate drive optocoupler contains an AlGaAs LED, which is optically coupled to an integrated circuit with a power output stage. This gate drive optocoupler is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications.

[12  >>  

Search