QSFP+ DAC Twin Axial Nylon Braided Flat Cable, 0.5~3 meter, Passive

F-tone Networks adopts 3M's twin axial cable technology to offer the flexible design which satisfies customers looking for high-quality. The core cable technology allows cable assemblies to provide system designers an extensive selection of interconnect system that enables flexible speed compatibility for applications up to 100Gbps. 

QSFP+ Extender (up to 80KM or I00KM)

F-tone Networks’s QSFP+ Extender (up to 80KM or I00KM) are designed for use in 100 Gigabit Ethernet links on up to 10km of single mode fiber. They are compliant with the QSFP28 MSA, IEEE 802.3ba QSFP+ Extender (up to 80KM or I00KM) and IEEE 802.3bm CAUI-4. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA and F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html". The optical transceiver is compliant per the RoHS Directive 2010. See F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html" for more details.

•     Four-channel full-duplex transceiver module
•     Hot-pluggable QSFP+ form factor
•     Maximum link length of 100m on OM3 Multimode Fiber (MMF)
•     Multirate capability: 1.06Gb/s to 10.5Gb/s per channel
•     Unretimed 4x10G electrical interface
•     Maximum power dissipation < 1.5W
•     Reliable VCSEL array technology
•     Commercial temperature range 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
•     Single 1x12 MPO receptacle
•     RoHS-6 compliant (lead-free)

QSFP/QSFP+ Passive Electrical Loopback is used for testing QSFP/QSFP+ transceiver ports in board level test. The electrical loopback provides a cost effective low loss method for QSFP/QSFP+ port testing. The loopback is packaged in a standard MSA housing compatible with all QSFP/QSFP+ ports. Transmit data from the host is electrically routed, (internal to the loopback module), to the receive data outputs and back to the host.

QSFP+ SR4

QSFP+ SR4 Plastic Pull Tab (FTCQ-4X-SR4xx )

Description
The F-tone Networks FTCQ-4X-SR4xx is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+ Transceiver for 40 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications.

QSFP+ to 4 SFP+ Breakout Cable Passive 0.5~5 meter

QSFP+ to 4x SFP+ breakout copper DAC cable, it's an application for the link with 40Gb/s rate switch to 4 upstream 10Gb/s device. bridge the gap between your 10G and 40G capable switches/host adapters. 

QSFP+ to 4 SFP+ Copper Breakout Cable, 1-Meter, Passive | QSFP-4SFP10G-CU1M

● 1-Meter
● QSFP+ to 4 SFP+ Breakout
● 40GBase-CU4, QDR
● Passive Copper DAC
● Twinax Copper
● F-tone Networks offer Compatible Service

QSFP+ to 4 SFP+ Copper Breakout Cable, 5-Meter, Passive | QSFP-4SFP10G-CU5M

● 5-Meter
● QSFP+ to 4 SFP+ Breakout
● 40GBase-CU4, QDR
● Passive Copper DAC
● Twinax Copper
● F-tone Networks offer Compatible Service

QSFP+ to QSFP+ cage, with EEPROM on the cage side, 30AWG, 10cm length

● 40G Transceivers/AOCs Solution for Liquid Immersion Cooling System
● with 3M flexible cable
● Insertion Loss 7.5dB on 40Gbps application
● Oil-resistance, dust-proof and anti-corrosion
● Customizable EEPROM mapping

QSFP+ to XFP(4) Breakout Cable, 1-Meter, Passive

● 1-Meter
● QSFP+ to 4 XFP+ Breakout
● 40GBase-CU4, QDR
● Passive Copper DAC
● Twinax Copper
● F-tone Networks offer Compatible Service

The FTCQ-40G-CLB-X Copper QSFP+ Cables is 40GBASE QSFP+ to QSFP+ direct-attach Cable and QSFP+ to four SFP+ cables. They are based on the QSFP+ Multi Source Agreement (MSA), and offer customers a wide variety of high-density 40 Gigabit Ethernet connectivity options for data center, high-performance computing networks, enterprise core and distribution layers, and service provider transport applications.

QSFP+CWDM4四路光收发一体模块

QSFP+SR4四路光收发一体模块

QSFP+光模块2x1笼子座子,QSFP+2X1 带导光柱 30u,QSFP+2X1 带导光柱 带导电胶圈30u" 标准型

• Compliant with 40G Ethernet IEEE802.3ba and
• 40GBASE-ER4 Standard
• QSFP+ MSA compliant
• Compliant with QDR/DDR Infiniband data rates
• Up to 11.2Gbps data rate per wavelength
• 4 CWDM lanes MUX/DEMUX design
• Up to 40km transmission
• Operating case temperature: 0~70C
• Maximum 3.5W operation power
• RoHS compliant

• Compliant with 40G Ethernet IEEE802.3ba and
• 40GBASE-LR4 Standard
• QSFP+ MSA compliant
• Compliant with QDR/DDR Infiniband data rates
• Up to 11.2Gbps data rate per wavelength
• 4 CWDM lanes MUX/DEMUX design
• Up to 10km transmission
• Operating case temperature: 0~70C
• Maximum 3.5W operation power
• RoHS compliant

• 4 independent full-duplex channels
• Up to 11.2Gbps data rate per channel
• MTP/MPO optical connector
• QSFP+ MSA compliant
• Digital diagnostic capabilities
• Capable of over 100m transmission on OM3 multi-mode ribbon fiber
• CML compatible electrical I/O
• Single +3.3V power supply
• Operating case temperature: 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
• XLPPI electric interface (with 1.5W Max power)
• RoHS-6 compliant

• Four-channel full-duplex transceiver modules            
• Transmission data rate up to 14.025Gbit/s per channel
• 4 channels 850nm VCSEL array
• 4 channels PIN photo detector array
•  Low power consumption <1.5W
• Housing isolated from connector ground
• Operating case temperature 0°C to +70°C
• 3.3V power supply voltage
• RoHS 6 compliant
• Hot Pluggable QSFP form factor
• Maximum link length of 100m on OM3 Multimode Fiber (MMF)and 150m on OM4 MMF
• Single MPO connector receptacle
•  Built-in digital diagnostic function