• Four-channel full-duplex transceiver modules            
• Transmission data rate up to 14.025Gbit/s per channel
• 4 channels 850nm VCSEL array
• 4 channels PIN photo detector array
•  Low power consumption <1.5W
• Housing isolated from connector ground
• Operating case temperature 0°C to +70°C
• 3.3V power supply voltage
• RoHS 6 compliant
• Hot Pluggable QSFP form factor
• Maximum link length of 100m on OM3 Multimode Fiber (MMF)and 150m on OM4 MMF
• Single MPO connector receptacle
•  Built-in digital diagnostic function

F-tone’s CFP-100G-LR4 100GE CFP transceiver modules are designed for use in 100 Gigabit Ethernet links over single mode fiber. They are compliant with the CFP MSA and IEEE 802.3ba 100GBASE-LR4. Digital diagnostics functions are available via an MDIO interface, as specified by the CFP MSA and F-tone Application Note AN-2080. The transceiver is RoHS-6 compliant and lead-free per Directive 2002/95/EC, and F-tone Application Note AN-2033.

F-tone’s CFP-40GNRZ-VSR 40G CFP transceiver modules are designed for use in 40 Gigabit links required for router to router client side applications or uplink interconnections to transport networks. Designed to enable optical compatibility with existing carrier client interfaces VSR2000-3R2 per ITU-T G.693, they are compliant with the CFP MSA, IEEE 802.3bg 40GBASE-FR and OTU3 requirements specified in ITU-T G.709. Digital diagnostics functions are available via an MDIO interface, as specified by the CFP MSA. The transceiver is RoHS-6 compliant and lead-free per Directive 2002/95/EC.

F-tone’s CFP-40G-100M 40G CFP transceiver modules are designed for use in 40 Gigabit Ethernet links over multimode fiber. They are compliant with the CFP MSA and IEEE 802.3ba 40GBASE-SR4. Digital diagnostics functions are available via an MDIO interface, as specified by the CFP MSA and F-tone Application Note AN-2078. The transceiver is RoHS-6 compliant and lead-free per Directive 2002/95/EC, and F-tone Application Note AN-2012.

•     Four-channel full-duplex transceiver module
•     Hot-pluggable QSFP+ form factor
•     Maximum link length of 300m on OM3 Multimode Fiber (MMF) and 400m on OM4 MMF
•     Multirate capability: 1.06Gb/s to 10.5Gb/s per channel
•     Unretimed XLPPI electrical interface
•     Maximum power dissipation < 1.5W
•     Reliable VCSEL array technology
•     Built-in digital diagnostic functions
•     Commercial operating case temperature range 0°C to 70°C
•     Single 1x12 MPO receptacle
•     RoHS-6 compliant (lead-free)

•     Hot-pluggable QSFP+ form factor
•     Supports 41.2 Gb/s aggregate bit rates
•     Power dissipation < 1.5W
•     RoHS-6 compliant (lead-free)
•     Commercial temperature range 0°C to 70°C(Standard)/-40°C to 85°C (Industrial)
•     Single 3.3V power supply
•     Maximum link length of 100m on Multimode Fiber (MMF OM3)
•     Uncooled 4x10Gb/s 850nm transmitter
•     XLPPI electrical interface
•     Single MPO receptacle
•     Built-in digital diagnostic functions