标准光模块
BiDi SFP+ 10G 10km
Specifications
- 产品型号: FTCS-BXX1X-10X
- 兼容品牌: 全系列
- 封装类型: SFP
- 传输速率: 10G万兆
- 传输距离: 10KM
- 发射波长: 1330nm/1270nm
- 接收波长: 1270nm/1330nm
- 工作温度: 商业级0℃～+70℃/工业级-40℃～+85℃ 可选
- 数字诊断: 带DDM
- 接收灵敏度: 10KM
- 接收灵敏度: 10KM
Description
BiDi SFP+ 10G 10km
BiDi SFP+ 10G 10km单纤双向万兆光模块，支持10G传输速率，发射部分采用低抖动、高性 能的 1330nm/1270nm DFB激光组件(1330/1270纳米波长)，可支持最大传输距离10km。支持热插拔，单纤双向传输，带 数字诊断监控功能，支持商业级温度范围（ 0°C to 70°C(Standard), -40°C to 85°C (Industrial)）。 主要应用在10GBASE LR Ethernet以太网，10G LW Fibre Channel光纤通道等领域。
BiDi SFP+ 10G 10km单纤双向万兆光模块是相对应的一对光模块，即一端使用了1330nm，则另一端必须使用1270nm。
该产品由F-tone公司自己研发生产，具有高密度低功耗的特点，产品拥有极高性价比。产品兼容CISCO，HP，华为，博科，QLogic，H3C，3COM，JUNIPER，EXTREME等国内外主流相关设备。产品通过CE，FCC，RoHS等国际认证。
F-tone的BIDI系列光模块分为：BIDI SFP，BIDI SFP+，BIDI XFP等光模块。BIDI SFP+光模块支持传输距离10km～40km。
| BiDi SFP+ 10G 10km |
| KEY FEATURES: | APPLICATION: |
| Up to 10.5Gb/s | 10GBASE LR Ethernet |
| Hot-pluggable SFP+ | 10G LW Fibre Channel |
| 1270nm DFB | |
| Simplex LC | |
| 20km on 9/125um SMF | |
| 0°C to 70°C(Standard), -40°C to 85°C (Industrial) | |
| 3.3V, Power Consumption <1W | |
| DDM/DOM |
| SPECIFICATIONS |
| Form Factor | SFP+ BiDi |
| Distance | 10km |
| Protocol | 10GBASE LR Ethernet |
| 10G LW Fibre Channel | |
| Data Rate (max) | 10.5Gb/s |
| Low End Case Temperature (°C) | 0°C |
| High End Case Temperature (°C) | 70°C |
| Diagnostics | DDM/DOM |
| Transmitter & Power Out | BOSA DFB, 10km |
| Receiver & Sense | BOSA PIN, 10km |
| Voltage Supply | 3.3 |
| Connector | LC Simplex |
| RoHS | YES |
| Certification | CE FCC REACH ROSH |
BiDi（Bidirectional）即：单纤双向。利用WDM技术,发送和接收两个方向使用不同的中心波长。实现一根光纤双向传输光信号。一般 光模块 有两个端口，TX为发射端口，RX为接收端口；而该光模块只有1个端口，通过光 模块中的滤波器进行滤波，同时完成1310nm光信号的发射和1550nm光信 号的接收，或者相反。因此该模块必须成对使用，他最大的优势就是节 省光纤资源。
| Part No. | Description |
| FTCS-B231X-10 | 1270nm/1330nm, 10Gbps, 10km, 0ºC ~ +70ºC |
| FTCS-B321X-10 | 1330nm/1270nm, 10Gbps, 10km, 0ºC ~ +70ºC |
| FTCS-B231X-10I | 1270nm/1330nm, 10Gbps, 10km, -40~+85℃ |
| FTCS-B321X-10I | 1330nm/1270nm, 10Gbps, 10km, -40~+85℃ |
Related Products
XFP-850多模光模块
Supports 9.95Gbps to 10.5Gbps bit rates
Maximum link length of 300m (50um,MMF,2000MHz.Km)
850nm VCSEL laser and PIN receiver
Low power consumption <1.5W
+3.3V +1.8Vpower supply
XFP MSA package with duplex LC connector
XFI electrical interface
No reference clock required
Compatible with RoHS
Excelllent EMI performance
Built-in digital diagnostic functions
Temperature range: 0℃ to +70℃
High reliability
XFP-10KM光模块
Supports 9.95Gb/s to 11.1Gb/s bit rates
Hot-pluggable XFP footprint
Maximum link length of 10km with SMF
1310nm Uncooled DFB laser
XFP MSA package with duplex LC connector
No reference clock required
Compatible with RoHS
+3.3V +1.8V power supply
Power dissipation <2.5W
Built-in digital diagnostic functions
Operating temperature: 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
SFP+ 850nm多模光模块
- Hot-pluggable SFP+ footprint
- Supports rate selectable 1.25 Gb/sOr 9.95 to 10.3 Gb/s bit rates
- Power dissipation < 1W
- RoHS-6 compliant ( lead-free )
- Single 3.3V power supply
- Maximum link length of 300m on2000 MHZ-km MMF
- Uncooled 850nm VCSEL laser
- Receiver limiting electrical interface
- Duplex LC Connector
- Built-in digital diagnostic functions
- Commercial temperature range： 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
10Gbps SFP+ 10KM单模光模块
- Optical interface compliant to IEEE 802.3ae 10GBASE-LR
- Electrical interface compliant to SFF-8431
- Hot Pluggable
- 1310nm DFB transmitter, PIN photo-detector
- Operating case temperature: 0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- Low power consumption
- Applicable for 10km SMF connection
- All-metal housing for superior EMI performance
- Advanced firmware allow customer system encryption information to be stored in transceiver
- Cost effective SFP+ solution, enables higher port densities and greater bandwidth
10Gbps SFP+ 40KM单模光模块
- Compliant with SFF-8431 and IEE802.3ae
- Data rate selectable ≤4.25Gbps or 9.95Gbps to 10.3Gbps bit rates
- Cooled EML transmitter and PIN receiver
- link length up to 40km
- Low Power Dissipation 1.5W Maximum
- Operating Case Temperature：0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- Single 3.3V power supply
- Diagnostic Performance Monitoring of module temperature, supplyVoltages, laser bias current, transmit optical power, receive optical power
- RoHS compliant and lead free
10Gbps SFP+ 80KM单模光模块
- Compliant with SFF-8431 and IEE802.3ae
- Data rate selectable ≤4.25Gbps or 9.95Gbps to 11.3Gbps bit rates
- Cooled EML transmitter and APD receiver
- link length up to 80km
- Low Power Dissipation 1.4W Typical (Maximum:2W)
- Operating Case Temperature:0°C to 70°C(Standard), -40°C to 85°C (Industrial)
- Single 3.3V power supply
- Diagnostic Performance Monitoring of module temperature, supplyVoltages, laser bias current, transmit optical power, receive optical power
- RoHS compliant and lead free