标准协议光模块

兼容协议光模块

其它种类光器件

技术支持

AFCT-89WDDZ

AFCT-89WDDZ

0.0/5 rating (0 votes)

Description

 AFCT-89WDDZ

            The Avago Technologies AFCT-89WDDZ is a Four-Channel duplex, Pluggable, single mode Fiber-Optic QSFP28 Transceiver for 100 Gigabit Ethernet Applications. This transceiver is a high performance module for short-range, single mode fiber interconnect applications. It integrates four electrical data lanes in each direction into transmission over a duplex LC single mode fiber optic cable. Each electrical lane operates at 25.78125 GBd and conforms to the 100GE CAUI-4 electrical interface.

 Per channel transmitter and receiver retimers, configured for 4x25G operation, can be bypassed to enable reduced power or alternative data rate transmission.
 Link distances up to 2km using SMF optical fiber are supported. These modules are designed to operate over single mode fiber systems using four coarse WDM wavelengths nominally at 1271nm, 1291nm, 1311nm and 1331nm. The electrical interface uses a 38 contact QSFP28 edge type connector. The optical interface uses a conventional LC duplex optical connector. This module incorporates Avago Technologies proven integrated circuit and DFB technology to provide reliable long life, high performance, and consistent service.
规格：
资料速率： 100 Gbps
产品类别： LC
光纤样式： Singlemode Glass
最远距离(M)： 2000
标称光波长 (nm)： 1310
发射器： DFB

Related Products

FT AFBR-83EDxxZ

AFBR-83EDxxZ

AFBR-83EDxxZ

       The Avago AFBR-83EDxxZ is a pluggable 10-channel, parallel optics CXP Active Optical Cable (AOC) for multi-channel 10Gbps proprietary interconnect and 100 Gigabit Ethernet (100GbE) applications.

The AFBR-83EDxxZ is designed to operate over multimode fiber systems using a nominal wavelength of 850 nm. The electrical interface uses an 84-contact edge type connector. The AOC incorporates Avago Technologies' proven integrated circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

Show Details

FT AFBR-83CDxxZ

AFBR-83CDxxZ

AFBR-83CDxxZ

        The Avago AFBR-83CDxxZ is a pluggable 12-channel, parallel optics CXP Active Optical Cable (AOC) for multi-channel 12.5Gbps proprietary interconnect, 100 Gigabit Ethernet (100GbE) and 12×10G InfiniBand (IB) QDR applications.
 The AFBR-83CDxxZ is designed to operate over multimode fiber systems using a nominal wavelength of 850 nm. The electrical interface uses an 84-contact edge type connector. The AOC incorporates Avago Technologies' proven integrated circuit

Show Details

FT AFBR-79Q2EKZ

AFBR-79Q2EKZ

AFBR-79Q2EKZ
         The Avago AFBR-79Q2EKZ evaluation kit is designed to provide designers with a convenient means of evaluating Avago QSFP/QSFP+ and QSFP+ AOC fiber optic transceiver modules. Designers can evaluate the management interface as well as the electrical and optical performance. A downloadable user guide is available which provides full description of the evaluation kit and graphical user interface (GUI) along with basic operating instructions.
A list of Avago QSFP+ and QSFP+ AOC products supported by the evaluation kit includes (but is not limited to) the following:

Show Details

FT AFBR-8420EVK

AFBR-8420EVK

AFBR-8420EVK

         The Avago AFBR-8420EVK evaluation kit is designed to provide designers with a convenient means of evaluating Avago 100G CFP2 SR10 module. The evaluation kit supports the Avago AFBR-8420Z, a 10-channel pluggable, multi-mode parallel optic transceiver module for high-density 100G Ethernet and Optical Transport Network (OTN) applications.

Show Details

SFP Extender Board

SFP Extender Board

SFP Extender Board

        The SFP extender board was designed to access SFP low speed control signals while a DUT SFP compliant to SFF-8074 is plugged into the target application system such as a network switch and router. 

Show Details

FT AFBR-79Q2EKZ

AFBR-79Q2EKZ

AFBR-79Q2EKZ
 
     The Avago AFBR-79Q2EKZ evaluation kit is designed to provide designers with a convenient means of evaluating Avago QSFP/QSFP+ and QSFP+ AOC fiber optic transceiver modules. Designers can evaluate the management interface as well as the electrical and optical performance. A downloadable user guide is available which provides full description of the evaluation kit and graphical user interface (GUI) along with basic operating instructions.

Show Details

Search