标准协议光模块

兼容协议光模块

其它种类光器件

技术支持

AFBR-77EVK

AFBR-77EVK

0.0/5 rating (0 votes)

Specifications

  • 接收灵敏度: 40KM
  • 接收灵敏度: 40KM

Description

AFBR-77EVK
        The Avago AFBR-77EVK evaluation kit is designed to provide designers with a convenient means of evaluating Avago MicroPOD  12x10G, 12x12.5G and 12x14G embedded optical transmitter/receiver modules. A downloadable user guide is available upon request, which provides full description of the evaluation kit and graphical user interface (GUI) along with basic operating instructions. The evaluation kit includes the following:
  • A Tx Board with an AFBR-77D1SZ Tx Module
  • A Rx Board with an AFBR-78D1SZ Rx Module
  • Necessary Optical Connectors and Cables for Establishing a Data Link
  • iPort I2C Communication Interface and a MicroPOD Viewer GUI on CD
  • Two Pairs of SMP-to-SMA Cables
  • A Snap-and-Go Extraction Tool
  • Access to Low Speed Signals (i.e., Int_L, Reset_L)
  • 24 Side-mounted SMP Connectors for Connecting to 12 Differential Tx or Rx High Speed Lanes on Each Evaluation Board
The evaluation kit supports higher speed set of MicroPOD modules which can be purchased separately. A list of Avago MicroPOD embedded optical transmitter/receiver modules supported by the evaluation kit includes (but is not limited to) the following:
规格：   
资料速率：10.3125 GBd  
产品类别：MTPR/MPO  
光纤样式：Multimode Glass  
最远距离(M)：150  
标称光波长 (nm)：850  
发射器：VCSEL  

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

Related Products

FT AFBR-83EDxxZ

AFBR-83EDxxZ

AFBR-83EDxxZ

       The Avago AFBR-83EDxxZ is a pluggable 10-channel, parallel optics CXP Active Optical Cable (AOC) for multi-channel 10Gbps proprietary interconnect and 100 Gigabit Ethernet (100GbE) applications.

The AFBR-83EDxxZ is designed to operate over multimode fiber systems using a nominal wavelength of 850 nm. The electrical interface uses an 84-contact edge type connector. The AOC incorporates Avago Technologies' proven integrated circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

Show Details

FT AFBR-83CDxxZ

AFBR-83CDxxZ

AFBR-83CDxxZ

        The Avago AFBR-83CDxxZ is a pluggable 12-channel, parallel optics CXP Active Optical Cable (AOC) for multi-channel 12.5Gbps proprietary interconnect, 100 Gigabit Ethernet (100GbE) and 12×10G InfiniBand (IB) QDR applications.
 The AFBR-83CDxxZ is designed to operate over multimode fiber systems using a nominal wavelength of 850 nm. The electrical interface uses an 84-contact edge type connector. The AOC incorporates Avago Technologies' proven integrated circuit

Show Details

FT AFBR-79Q2EKZ

AFBR-79Q2EKZ

AFBR-79Q2EKZ
         The Avago AFBR-79Q2EKZ evaluation kit is designed to provide designers with a convenient means of evaluating Avago QSFP/QSFP+ and QSFP+ AOC fiber optic transceiver modules. Designers can evaluate the management interface as well as the electrical and optical performance. A downloadable user guide is available which provides full description of the evaluation kit and graphical user interface (GUI) along with basic operating instructions.
A list of Avago QSFP+ and QSFP+ AOC products supported by the evaluation kit includes (but is not limited to) the following:

Show Details

FT AFBR-8420EVK

AFBR-8420EVK

AFBR-8420EVK

         The Avago AFBR-8420EVK evaluation kit is designed to provide designers with a convenient means of evaluating Avago 100G CFP2 SR10 module. The evaluation kit supports the Avago AFBR-8420Z, a 10-channel pluggable, multi-mode parallel optic transceiver module for high-density 100G Ethernet and Optical Transport Network (OTN) applications.

Show Details

FT SFF-8074

SFF-8074

SFF-8074

              The SFP extender board was designed to access SFP low speed control signals while a DUT SFP compliant to SFF-8074 is plugged into the target application system such as a network switch and router. TX & RX high speed signals are routed on the board with 50 ohm transmission lines to maintain signal integrity.

Show Details

FT AFBR-83EVK

AFBR-83EVK

 AFBR-83EVK 

      The Avago AFBR-83EVK evaluation kit is designed to provide designers with a convenient means of evaluating the electrical and optical performance of Avago CXP and CXP AOC fiber optic transceiver modules. 

Show Details

Search