标准协议光模块

兼容协议光模块

其它种类光器件

技术支持

AFBR-57F5xMZ

0.0/5 rating (0 votes)

Description

 AFBR-57F5xMZ
            The Avago AFBR-57F5xMZ is an optical transceiver module that supports high speed serial links over multi-mode optical fiber at signaling rates up to 14.025 Gb/s (the serial line rate of 16GFC). The product is compliant with Small Form Pluggable industry agreements SFP and SFP+ for mechanical and low speed electrical specifications. High speed electrical and optical specifications are compliant with ANSI Fibre Channel FC-PI-5.
The AFBR-57F5xMZ is a multi-rate 850nm transceiver which ensures compliance with FC-PI-5 16GFC, 8GFC and 4GFC specifications. Per the requirements of 16GFC, internal clock and data recovery circuits (CDRs) are present on both electrical input and electrical output of this transceiver. These CDRs will lock at 14.025Gb/s (16GFC) but must be bypassed for operation at 10.3125 Gb/s (10GE), 8.5Gb/s (8GFC) and 4.25 Gb/s (4GFC), accomplished by using two Rate Select inputs to configure transmit and receive sides. Transmitter and receiver can operate at different data rates, as is often seen during Fibre Channel speed negotiation.
Digital diagnostic monitoring information (DMI) is present in the AFBR-57F5xMZ per the requirements of SFF-8472, providing real time monitoring information of transceiver laser, receiver and environment conditions over a SFF-8431 2-wire serial interface.
特征描述：
  • 符合 RoHS 指令
  • 850 纳米垂直腔面发射激光器 (VCSEL)
  • 符合 IEC60825-1 和 CDRH Class 1 护眼标准
  • 温度范围广泛（0°C 到 +85°C）
  • LC 双工光纤连接器接口符合 ANSI TIA/EIA604-10 (FOCIS 10A) 的要求
  • 诊断特点依照 SFF-8472“用于光纤收发器的诊断监测接口”
  • 增强的运行特征包括 EWRAP、OWRAP 和可变电气 EQ/重点设置
  • 实时监测：
  • 发射器的平均光学功率
  • 接收光纤的平均功率
  • 激光偏压电流
  • 温度
  • 供电电压
  • 根据 SFF-8432 的 SFP+ 机械规格
  • 符合 SFP+ 的低速接口
  • 符合光纤通道 FC-PI-5 的高速接口
  • 符合光纤通道 FC-PI-5 的光纤链路距离
  • AFBR-57F5UMZ 可根据 IEEE 802.3ae 10GBASE-SR 标准在传输率为 10.3125 Gb/s 时与符合 10GE 的收发器相互操作，与 Avago 的 10G-USR 收发器连用时，使用 OM3 多模光纤 (MMF)，连接距离高达 100 米，OM4 多模光纤 (MMF) 高达 125 米。
规格：
资料速率： 14.025/8.5/4.25 GBd
产品类别： LC
光纤样式： Multimode Glass
最远距离(M)： 100
标称光波长 (nm)： 850
发射器： VCSEL

Related Products

FT AFBR-83CDxxZ

AFBR-83CDxxZ

AFBR-83CDxxZ

        The Avago AFBR-83CDxxZ is a pluggable 12-channel, parallel optics CXP Active Optical Cable (AOC) for multi-channel 12.5Gbps proprietary interconnect, 100 Gigabit Ethernet (100GbE) and 12×10G InfiniBand (IB) QDR applications.
 The AFBR-83CDxxZ is designed to operate over multimode fiber systems using a nominal wavelength of 850 nm. The electrical interface uses an 84-contact edge type connector. The AOC incorporates Avago Technologies' proven integrated circuit

Show Details

FT AFBR-79Q2EKZ

AFBR-79Q2EKZ

AFBR-79Q2EKZ
         The Avago AFBR-79Q2EKZ evaluation kit is designed to provide designers with a convenient means of evaluating Avago QSFP/QSFP+ and QSFP+ AOC fiber optic transceiver modules. Designers can evaluate the management interface as well as the electrical and optical performance. A downloadable user guide is available which provides full description of the evaluation kit and graphical user interface (GUI) along with basic operating instructions.
A list of Avago QSFP+ and QSFP+ AOC products supported by the evaluation kit includes (but is not limited to) the following:

Show Details

FT AFBR-8420EVK

AFBR-8420EVK

AFBR-8420EVK

         The Avago AFBR-8420EVK evaluation kit is designed to provide designers with a convenient means of evaluating Avago 100G CFP2 SR10 module. The evaluation kit supports the Avago AFBR-8420Z, a 10-channel pluggable, multi-mode parallel optic transceiver module for high-density 100G Ethernet and Optical Transport Network (OTN) applications.

Show Details

FT AFBR-5710LZ

AFBR-5710LZ

AFBR-5710LZ 

         The Avago AFBR-5710LZ family of gigabit ethernet SFP optical transceivers offers the customer a wide range of design options, including optional DMI features, two temperature ranges (extended or industrial), and choice of standard or bail delatch.

Show Details

FT AFCT-5750ATLZ

AFCT-5750ATLZ

AFCT-5750ATLZ

        The Avago AFCT-5750ATLZ family of SFP optical transceivers for OC12/STM-4 offers many design options, including optional DMI, extended or industrial temperature ranges, and standard push-button or bail delatch.

The AFCT-5750ATLZ family targets applications requiring DMI features, and the AFCT-5750ATLZ family is streamlined for those applications where DMI features are not needed.

Show Details

FT AFCT-5765PZ

AFCT-5765PZ

AFCT-5765PZ

      The Avago AFCT-5765PZ  family of SFP optical transceivers for OC3 applications offer many design options, including optional DMI, extended or industrial temperature ranges, and standard push-button or bail delatch.

The AFCT-5765PZ  family targets applications requiring DMI features, and the AFCT-5765PZ  family is streamlined for those applications where DMI features are not needed.

Show Details

Search