标准光模块

  2. 首页
  3. 标准光模块
  4. SFP+光模块
  5. SFP+ Twinax Cable

标准协议光模块

兼容协议光模块

其它种类光器件

技术支持

10G SFP+ Twinax Cable

SFP+ Twinax Cable

0.0/5 rating (0 votes)

Specifications

  • 产品型号: 10GSFP-CABLE-XX
  • 兼容品牌: 全系列
  • 封装类型: SFP+
  • 传输速率: Up to 10.5G
  • 传输距离: 0.5~15m
  • 发射波长: copper cable
  • 接收波长: copper cable
  • 工作温度: 商业级0℃～+70℃/工业级-40℃～+85℃ 可选
  • 数字诊断: 带DDM
  • 接收灵敏度: 0.5~15m
  • 接收灵敏度: 0.5~15m

Description

SFP+ Twinax Cable

F-tone SFP+ direct attach copper cable assemblies provide a cost-effective solution over fiber optics in short reach applications. The design allows for serial data transmission up to 10Gbps in each direction.  Low power consumption helps make the SFP+ copper cable assembly an economical solution for within rack or rack-to-rack applications.

Features:

  • Supports serial data rates up to 10Gbps
  • Low cost
  • Low power consumption
  • Enhanced EMI suppression
  • Pull-to-release retractable pin latch design

Application:

  • Switches
  • Networking - servers, routers and hubs
  • Enterprise storage
  • Telecommunications Equipment
  • Network interface cards

 Ordering information:

Part No. Data rate Length AWG Passive/Active Temp
10GSFP-CLB-H-30P Up to 10.5G 0.5m 30 Passive 0-70C
10GSFP-CLB-01-30P Up to 10.5G 1m 30 Passive 0-70C
10GSFP-CLB-02-30P Up to 10.5G 2m 30 Passive 0-70C
10GSFP-CLB-03-30P Up to 10.5G 3m 30 Passive 0-70C
10GSFP-CLB-04-30P Up to 10.5G 4m 30 Passive 0-70C
10GSFP-CLB-05-30P Up to 10.5G 5m 30 Passive 0-70C
10GSFP-CLB-H-24P Up to 10.5G 0.5m 24 Passive 0-70C
10GSFP-CLB-01-24P Up to 10.5G 1m 24 Passive 0-70C
10GSFP-CLB-02-24P Up to 10.5G 2m 24 Passive 0-70C
10GSFP-CLB-03-24P Up to 10.5G 3m 24 Passive 0-70C
10GSFP-CLB-04-24P Up to 10.5G 4m 24 Passive 0-70C
10GSFP-CLB-05-24P Up to 10.5G 5m 24 Passive 0-70C
10GSFP-CLB-06-24P Up to 10.5G 6m 24 Passive 0-70C
10GSFP-CLB-07-24P Up to 10.5G 7m 24 Passive 0-70C
10GSFP-CLB-08-24P Up to 10.5G 8m 24 Passive 0-70C
10GSFP-CLB-09-24P Up to 10.5G 9m 24 Passive 0-70C
10GSFP-CLB-10-24P Up to 10.5G 10m 24 Passive 0-70C
10GSFP-CLB-11-24P Up to 10.5G 11m 24 Passive 0-70C
10GSFP-CLB-12-24P Up to 10.5G 12m 24 Passive 0-70C
10GSFP-CLB-05-30 Up to 10.5G 5m 30 Active 0-70C
10GSFP-CLB-07-30 Up to 10.5G 7m 30 Active 0-70C
10GSFP-CLB-10-28 Up to 10.5G 10m 28 Active 0-70C
10GSFP-CLB-12-28 Up to 10.5G 12m 28 Active 0-70C
10GSFP-CLB-15-24 Up to 10.5G 15m 24 Active 0-70C

SFP+ Direct Attach , also known as Direct Attach (DA), 10GSFP+Cu, 10GBASE-CR, 10GBASE-CX1, SFP+, or 10GbE Cu SFP cables. Direct Attach uses a passive twin-ax cable assembly and connects directly into an SFP+ housing. SFP+ Direct Attach has a fixed-length cable, typically 1 to 7 m (passive cables) or up to 15 m (active cables) in length and, like 10GBASE-CX4, is low-power, low-cost and low-latency with the added advantages of using less bulky cables and of having the small form
factor of SFP+. SFP+ Direct Attach today is tremendously popular, with more ports installed than 10GBASE-SR. SFP+ Direct Attach will be replaced by AOC cables due to better performance and reducing price gap if compare with copper cables.

Advantages of DAC cable:

  • DAC cables are a cost effective, proven solution for interconnecting networking applications
  • Use the same port as an optical transceiver, but with significant cost savings and power savings in short reach applications
  • The products are continuing to evolve to meet industry needs of higher data rates
  • and densities with low power consumption
  • Ethernet, Fibre Channel, and InfiniBand standards are increasing in speed to support this increase

Related Products

50GHz DWDM SFP+

50GHz DWDM SFP+

  • SFP+ Single-Mode for DWDM Application
  • Duplex SFP+ Transceiver
  • Digital Diagnostic Function
  • RoHS6 Compliant
  • Available in all C-Band Wavelengths on the 50GHz
  • DWDM ITU Grid
  • Temperature-Stabilized DWDM EML Transmitter
  • Duplex LC Connector
  • Power Dissipation  ＜1.5W
  • Dispersion tolerance from -300ps/nm to 800ps/nm
  • Hot-Pluggable SFP+ Footprint
  • Compliant with SFF-8431 MSA
  • Compliant with SFF-8432 MSA
  • Operating Case Temperature:0°C to 70°C(Standard), -40°C to 85°C (Industrial)

Show Details

Tunable SFP+

Tunable DWDM SFP+ Transceiver

F-tone tunable SFP+ transceiver is fully compliant to SFP+ MSA. It supports 50GHz DWDM 10Gb/s SONET/SDH, 10 Gigabit Ethernet, and 10 Gigabit Fibre Channel applications over fiber without dispersion compensation. Digital diagnostics functions are available via a 2-wire serial interface, as specified in the SFP+ MSA and SFF 8472 MSA.

Show Details

SDH SFP+ transceiver

SDH SONET SFP+ transceiver

Compliant with Small Form Pluggable (SFP) Multi Source Agreement (MSA) mechanical and electrical specifications for LC Duplex transceivers, ANSI Fibre Channel transceiver for FC-PI-5 and FC-PI-2 gigabit applications.

 

Show Details

CWDM 10G SFP+ Transceiver

CWDM 10G SFP+ Transceiver

F-tone CWDM SFP+  transceiver is small form factor pluggable module for bi-directional serial optical data communications such as IEEE 802.3ae 10GBASE-LR/LW/ER/ZR. It is with the SFP 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. This module is designed for single mode fiber and operates at a nominal wavelength of CWDM wavelength.

Show Details

BIDI SFP+

BIDI SFP+ transceiver

F-tone BIDI SFP+ transceivers are designed for bi-directional 10G serial optical data communications such as IEEE 802.3ae 10GBASE-BX by using 1330(1270nm) transmitter and 1270(1330) nm receiver. The transceiver consists of two sections: The transmitter section uses a multiple quantum well 1330(1270) nm DFB laser and is a class 1 laser compliant according to International Safety Standard IEC 60825. The receiver section uses an integrated 1270(1330) nm detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC.

Show Details

10G SFP+ Transceiver

10G SFP+ Transceiver

F-tone SFP+ transceiver are multi-purpose optical modules for 10Gbit/s data transmission applications at 850nm, 1310nm and 1550nm. The transceivers are ideally suited for datacom and storage area network (SAN/NAS) applications based on the IEEE 802.3ae and Fibre Channel standards, Fiber Channel 10G, 8.5G, 4.25G, 2.125G, 1.0625G, 10G BASE-SW/SR/LR/ER, 1000 Base-SX Ethernet.

Show Details

Search