标准光模块

  2. 首页
  3. 标准光模块
  4. Components for Fiber sensing
  5. PM Faraday Mirror

标准协议光模块

兼容协议光模块

其它种类光器件

技术支持

PM Faraday Mirror

PM Faraday Mirror

0.0/5 rating (0 votes)

Description

PM Faraday Mirror

The Polarization Maintaining Faraday Mirror is a passive device that provides 90 degree rotation regarding to the polarization state of the input light. The PMFM offers excellent performance including the lowest possible insertion loss and enviromental stability. It is used in amplifiers, fiber lasers and fiber instruments to minimize the polarization effect.

Specifications

Parameter

Unit

Value

Center Wavelength (λc)

nm

1310, 1480 or 1550

Operating Wavelength Range

nm

λc ± 15

Typ. Insertion Loss

dB

0.4

Max. Insertion Loss

dB

0.6

Faraday Rotation Angle (single pass)

degree

45

Max. Rotation Angle Tolerance, λc, 23 ℃

degree

± 1

Min. Extinction Ratio

dB

20

Fiber Type

PM Panda fiber

Max. Optical Power (Continuous Wave)

mW

300

Max. Tensile Load

N

5

Operating Temperature

℃

-5 to +70

Storage Temperature

℃

-40 to +85

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

Related Products

FT IP68等级Fullaxs光纤跳线光纤防水连接器

IP68等级Fullaxs光纤跳线光纤防水连接器

IP68等级Fullaxs光纤跳线光纤防水连接器

产品简介

拉远光缆又名基站光缆，适用于普通室外环境中，常用于塔顶，通信基站的设备口防水对接。外皮采用低烟无卤，防火防水防鼠。芯线内有十组进口抗拉芳纶。线柔软性好，受布线空间影响小，收放自如。

Show Details

FT Fanout MPO/MTP-LC/UPC万兆多模OM3 24芯光纤跳线

Fanout MPO/MTP-LC/UPC万兆多模OM3 24芯光纤跳线

Fanout MPO/MTP-LC/UPC万兆多模OM3 24芯光纤跳线

产品简介

MPO光纤跳线，MPO(Multi-fiberPushOn)连接器为MT系列连接器之一，MT系列的插芯都采用插芯端面上左右两个直径为0.7mm的导引孔与导引针（又叫PIN针）进行精准连接。MPO连接器与光纤光缆加工后可生产出各种形式的MPO跳线。MPO跳线可以有2~12芯设计，最多可以是24芯，目前使用最多的是12芯的MPO连接器。MPO连接器的紧凑设计，使MPO跳线芯数多，体积小。MPO跳线被广泛应用于在布线过程中需要高密度集成光纤线路环境中，FTTX及40/100GSFP、SFP+等收发模块或设备内外部的连接应用。MPO带分支器跳线等形式的MPO跳线产品，皆符合Telcordia-GR-326、IEC标准及Rohs要求。MPO光纤跳线的应用企业的不同楼宇之间局域网布线光有源设备中光链路互连通信基站内布线，配线箱内布线居民小区，工业园机房，商业大楼机房内光信号连接楼宇密集布线系统光纤通信系统，有线电视网，电信网络局域网(LANs)、广域网(WANs)、FTTx

Show Details

FT Fanout MPO/APC-LC/UPC单模12芯光纤跳线

Fanout MPO/APC-LC/UPC单模12芯光纤跳线

Fanout MPO/APC-LC/UPC单模12芯光纤跳线

产品简介

MPO光纤跳线，MPO(Multi-fiberPushOn)连接器为MT系列连接器之一，MT系列的插芯都采用插芯端面上左右两个直径为0.7mm的导引孔与导引针（又叫PIN针）进行精准连接。MPO连接器与光纤光缆加工后可生产出各种形式的MPO跳线。MPO跳线可以有2~12芯设计，最多可以是24芯，目前使用最多的是12芯的MPO连接器。MPO连接器的紧凑设计，使MPO跳线芯数多，体积小。MPO跳线被广泛应用于在布线过程中需要高密度集成光纤线路环境中，FTTX及40/100GSFP、SFP+等收发模块或设备内外部的连接应用。MPO带分支器跳线等形式的MPO跳线产品，皆符合Telcordia-GR-326、IEC标准及Rohs要求。MPO光纤跳线的应用企业的不同楼宇之间局域网布线光有源设备中光链路互连通信基站内布线，配线箱内布线居民小区，工业园机房，商业大楼机房内光信号连接楼宇密集布线系统光纤通信系统，有线电视网，电信网络局域网(LANs)、广域网(WANs)、FTTx

Show Details

FT 2000 nm Faraday Rotator Mirror

2000 nm Faraday Rotator Mirror

 2000 nm Faraday Rotator Mirror

The Faraday Mirror is a passive device that provides 90 degree rotation regarding to the polarization state of the input light. The FM offers excellent performance including the lowest possible insertion loss and enviromental stability. It is used in EDFAs, fiber lasers and fiber instruments to mininize the polarization effect. 

Show Details

FT 2000nm Faraday Rotator Mirror (FM/FR), 2.0μm Fiber Laser

2000nm Faraday Rotator Mirror (FM/FR), 2.0μm Fiber Laser

2000nm Faraday Rotator Mirror (FM/FR), 2.0μm Fiber Laser

The Faraday Mirror is a passive device that provides 90 degree rotation regarding to the polarization state of the input light. The FM offers excellent performance including the lowest possible insertion loss and enviromental stability. It is used in EDFAs, fiber lasers and fiber instruments to mininize the polarization effect.

Show Details

FT Faraday Mirror

Faraday Mirror

Faraday Mirror

The Faraday Mirror is a passive device that provides 90 degree rotation regarding to the polarization state of the input light. The FM offers excellent performance including the lowest possible insertion loss and enviromental stability. It is used in EDFAs, fiber lasers and fiber instruments to mininize the polarization effect. 

Show Details

Search