标准光模块

  2. 首页
  3. 标准光模块
  4. CFP光模块
  5. MiniPOD 12x10G Transmitter Module

标准协议光模块

兼容协议光模块

其它种类光器件

技术支持

MiniPOD 12x10G Transmitter Module

MiniPOD 12x10G Transmitter Module

0.0/5 rating (0 votes)

Specifications

  • 产品型号: MiniPOD 12x10G Transmitter Module
  • 兼容品牌: 全系列
  • 封装类型: MiniPOD
  • 传输速率: 12x10G
  • 传输距离: Avago VCSEL Array Transmitter/PIN Array Receiver
  • 发射波长: Avago VCSEL Array Transmitter
  • 接收波长: Avago PIN Array Receiver
  • 工作温度: 商业级0℃～+70℃/工业级-40℃～+85℃ 可选
  • 数字诊断: 带DDM
  • 接收灵敏度: MiniPOD 12x10G Transmitter Module
  • 接收灵敏度: MiniPOD 12x10G Transmitter Module

Description

MiniPOD 12x10G Transmitter Module

The FTMiniPOD-811VxyZ and FTMiniPOD-821VxyZ are a set of 12-channel parallel optics transmitter and receiver modules optimized for short-range parallel multi-lane data communication and interconnect applications. These high-speed, high-density optical modules are designed to operate over multimode fiber systems using a nominal wavelength of 850 nm.

F-tone’s FTMiniPOD solution offers system designers two module package options to optimize their cable management and board layout. FTMiniPOD-811RxyZ Tx/FTMiniPOD-821RxyZ Rx is used with round multi-lane cable assemblies for applications requiring multiple turns of the jumper cable inside the chassis. FTMiniPOD-811FxyZ Tx/FTMiniPOD-821FxyZ Rx is used with flat ribbon cable assemblies, allowing dense tiling of the modules as the jumper cables can be thread under the dust-cap of the next module. This top mounted optical connection maximizes board layout density by eliminating board space lost to the optical connector and strain relief.

The electrical interface uses a 9×9 MEG-Array connector with 1.27 mm pitch:

The optical interface requires the user to provide a custom designed optical turn 1×12 ribbon cable PRIZM® LightTurn® connector. The thermal interface provided can require either a user provided heat sink or use of the F-tone general purpose clip on heat sink, to maintain the module case temperature to be between 0 °C to 70 °C during continuous operation.

FTMiniPOD Transmitter Part Numbers
FTMiniPOD-811FxyZ Flat Ribbon Jumper Cable, Transmitter Base Part Number
FTMiniPOD-821FxyZ Flat Ribbon Jumper Cable, Receiver Base Part Number
FTMiniPOD-811RxyZ Round Jumper Cable, Transmitter Base Part Number
FTMiniPOD-821RxyZ Round Jumper Cable, Receiver Base Part Number
 

MicroPOD-MiniPOD

  • View Data Sheet (PDF)

Lifecycle status:
Active



Features [-]

  • Compliant to IEEE 802.3ba 100GbE (100GBASE-SR10 and nPPI) per lane
  • Compliant to 12×QDR Infiniband
  • Operates at 10.3125 Gbps per channel with 64b/66b encoded data for 100GbE application and at 10 Gbps with 8b/10b encoded data for IB-QDR application
  • High Aggregate bandwidth: 120 Gbps per module
  • High density footprint: 21.95 mm × 18.62 mm size
  • Two package options to optimize internal cable  management and system layout
  • Separate transmitter and receiver modules
  • 850 nm VCSEL array in transmitter; PIN array in receiver
  • Links up to 150 m at 10.3125 Gbps with OM4 4700 MHz•km 50 mm MMF
  • Optical Interface: PRIZM® LightTurn® optical turn 1×12 ribbon fiber connector
  • Pluggable electrical interface: 9×9 MEG-Array for ease of design and manufacturability
  • Low Power consumption: 3.0 W Max per Transmitter/ Receiver pair (0 °C to 70 °C operating range)
  • Dedicated signals for module address, module reset and host interrupt
  • Two Wire Serial (TWS) interface with maskable interrupt for expanded functionality including:
    • Individual channel functions: disable, squelch disable, lane polarity inversion, TX eye margin enable
    • A/D read back: module temperature and supply voltages, per channel laser current and laser power, or received power
    • Status: per channel Tx fault, electrical (transmitter) or optical (receiver) LOS, and alarm flags
    • Programmable equalization integrated with DC blocking caps at transmitter data input
    • Programmable receiver output swing and deemphasis level
    • Field Upgradable Firmware capability
  • 0°C to 70°C case temperature continuous operating range. 85°C supported for short durations

Applications [-]

  • 100 GbE and IB-QDR / IB-DDR / IB-SDR interconnects
  • Data Aggregation, Backplane and Proprietary Protocol and Density Applications
  • High Performance and High Productivity computer interconnects
  • Switch Fabric interconnects

Documents [-]

Data Sheets & Technical Specifications

  • Product Brief - FTMiniPOD FTMiniPOD-811VxyZ, FTMiniPOD-821VxyZ, 10 Gbps/Channel Twelve Channel, Parallel Fiber Optics Modules (885 KB,PDF)

Related Products

CFP-100G-SR10

CFP-100G-SR10

  • Transmission data rate up to 11.2Gbit/s per channel
  • CFP MSA compliant
  • Compliant to IEEE 802.3ba specification for 100GBASE-SR10 links
  • Up to 11.2 Gbps per channel bandwidth,
  • OTU4 compatible
  • 10 channels 850nm VCSEL array
  • 10 channels PIN photo detector array
  • OM3 Multimode Fiber cable of up to 300m and OM4 Multimode Fiber cable of up to 400m
  • MDIO digital diagnostic and control capabilities.
  • compliant to CFP MSA Management Interface Specification, Draft 1.4
  • TX input and RX output CDR retiming
  • Hot pluggable electrical interface
  • Power class 1 (<8W max)
  • Operating case temperature 0°C to +70°C
  • 3.3V power supply
  • RoHS 6 compliant(lead free)

 

Show Details

100Gbps 10channel CXP Optical Transceiver

100Gbps 10channel CXP Optical Transceiver

The F-tone CXP-100G-150XX is a 10-channel CXP pluggable optical transceiver module for 100 Gigabit Ethernet applications. The transceiver is optimized for high-speed, short-range data communications. It has 10 data lanes in each direction with greater than 100 Gbps of aggregate bandwidth. Each lane can operate at 10.3125 Gbps up to 100 meters using OM3 fiber and 150 meters using OM4 fiber. 

Show Details

150Gbps CXP Transceiver

150Gbps-12channel CXP Transceiver

The F-tone CXP-150G-XX is a 12-channel CXP pluggable optical transceiver module for 100GbE+ applications. The transceiver is optimized for high-speed, short-range data communications. It has 12 data lanes in each direction with an aggregate bandwidth of 150 Gbps. Each lane can operate at 12.5 Gbps up to 50 meters using OM3 fiber and 65 meters using OM4 fiber.

Show Details

MicroPOD 12x10G Receiver Module

MicroPOD 12x10G Receiver Module

The FT-MicroPOD77D1SZ and FT-MicroPOD78D1SZ are a set of 12-channel, pluggable, parallel fiber optics transmitter and receiver fiber optic modules optimized for short-range parallel multi-lane data communication and interconnect applications. These high-speed, high density optical modules are designed to operate over multimode fiber systems using a nominal wavelength of 850 nm.

Show Details

MicroPOD 12x10G Transmitter

MicroPOD 12x10G Transmitter Module

The FTMicroPOD-77D1SZ and FTMicroPOD-78D1SZ are a set of 12-channel, pluggable, parallel fiber optics transmitter and receiver modules optimized for short-range parallel multi-lane data communication and interconnect applications. These high-speed, high density optical modules are designed to operate over multimode fiber systems using a nominal wavelength of 850 nm.

Show Details

MiniPOD 12x10G Module

MiniPOD 12x10G Receiver Module

The FTMiniPOD-811VxyZ and FTMiniPOD-821VxyZ are a set of 12-channel parallel optics transmitter and receiver modules optimized for short-range parallel multi-lane data communication and interconnect applications. These high-speed, high-density optical modules are designed to operate over multimode fiber systems using a nominal wavelength of 850 nm.

Show Details

Search