标准光模块

标准协议光模块

兼容协议光模块

其它种类光器件

技术支持

Fullaxs光纤跳线光纤防水连接器

Fullaxs光纤跳线光纤防水连接器

0.0/5 rating (0 votes)

Description

FullAXS连接器,应用于(LTE)光纤到天线(FTTA)技术的户外连接系统,能在远程无线电和电信应用基站间提供SFP链接,可兼容市场上各种SFP收发器,允许终端用户选择符合其特定系统要求的收发器。采用耐磨光缆组件,连接器内部空间比市场一般的防水连接器空间大,卡口锁相当牢固,无需担心施工过程中连接头掉落。防水密封性能高,远远满足IP67-IP68防水等级要求,而且还实现了连接器外壳的单手安装,操作简单方便。

该产品还允许通过堵头上的保险开关方便地拆卸和更换收发器,而无需打开整个远程无线电箱,以避免电箱内各电子元器件暴露于恶劣的天气条件下。接头内部使用标准LC双工接头(客户可根据自己需要选择单多模的型号),可以与所有LC双SFP收发器快速接合。

此外该连接器还可以改装成为RJ45和电源连接器。

产品特性/优点:

1.当连接器接通,系统将发出确认信号,告知操作人员连接成功

2.安装中或安装后无需扣紧电缆

3.坚固的卡口锁定可确保整个安装过程的便捷和安全

4.采用防水、防尘和耐腐蚀设计,最高防水等级可达IP68

5.消除了远程无线电箱中光纤的管理工作,降低人工成本

连接器光学性能数据表

项目 测试条件 单模 多模
光学特性 插入损耗 UPC SM:1310nm/1550nm MM:850nm/1300nm ≤0.2dB ≤0.3dB
APC
1310nm/1550nm ≤0.3dB
回波损耗 UPC SM:1310nm/1550nm MM:850nm/1300nm ≥55 dB ≥35 dB
APC 1310nm/1550nm ≥65 dB
机械特性 (附加损耗) 冲击试验 1.8高度,8次 <0.1 dB <0.1 dB
振动试验 10-60Hz,1mm全振幅 <0.1 dB <0.1 dB
插拔寿命
1000次以上
<0.1 dB <0.1 dB
抗拉强度 >100N <0.1 dB <0.1 dB
环境特性
(附加损耗)
高低温循环试验
-25℃~+70℃,2循环
<0.2 dB <0.2 dB
高温试验 +80℃,2小时 <0.2 dB <0.2 dB
低温试验 -40℃,2小时 <0.2 dB <0.2 dB
湿热试验 +40℃,90-95%RH,2小时 <0.2 dB
<0.2 dB

 

 

 

 

 

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

Search