标准光模块

标准协议光模块

兼容协议光模块

其它种类光器件

技术支持

Categories starting with C

CWDM SFP (32)

CWDM SFP光模块包括速率155M,622M,1.25G(1000M),2.5G,4.25G。F-tone生产的CWDM SFP 1.25G系列光模块支持传输距离20km~160km,相应的传输波长有1270nm 1290nm 1310nm 1330nm 1350nm 1370nm 1390nm 1410nm 1430nm 1450nm 1470nm 1490nm 1510nm 1530nm 1550nm 1570nm 1590nm 1610nm等8个波段,相邻两个波段间隔20nm。
CWDM SFP

Copper SFP (22)

纯百兆Copper SFP/SFP电口模块 10/100M自适应Copper SFP/SFP电口模块 纯千兆Copper SFP/SFP电口模块 10/100/1000M自适应Copper SFP/SFP电口模块
Copper SFP

CWDM SFP+ (32)

CWDM SFP+ 10G 40KM Transceiver CWDM SFP+ 10G 80KM Transceiver CWDM SFP+ 10G 120KM Transceiver
CWDM SFP+

CWDM XFP (9)

CWDM XFP 40KM Transceiver CWDM XFP 80KM Transceiver CWDM XFP 120KM Transceiver
CWDM XFP

CSFP光模块 (16)

CSFP(Compact Small Form Factor Pluggable)即是紧凑型SFP,是在现在流行的SFP封装基础上,发展更为先进、更为紧凑的CSFP封装。通过采用双通道、四通道的设计,CSFP采用现有SFP通用接口,但将外形尺寸缩小到现有工业标准的一半和四分之一,通过组合还可灵活配置通道数量。如果继续采用传统分立元件方案,那么在技术上将很难实现上述功能。CSFP结合高集成度的光电集成技术,在拥有SFP所有的技术优势的基础上,大幅度减小光收发模块和光系统设备的外形尺寸,显著增加通信端口密度及数据吞吐量,降低系统成本,可望在数据通信市场上大显身手。
CSFP光模块

CSFP+10G光模块 (1)

CSFP(紧凑型SFP)系列产品,包括1G,2.5G,10G速率和CWDM DWDM激光器解决方案,距离10公里到80公里。该系列产品应用在一个标准SFP/SFP+时隙2个BiDi的CSFP所支持交换机和路由器 SFF-8472 CSFP 1000Base-LX 1000Base-CWDM 1000Base-DWDM 10GBase-LR 10GBase-CWDM 10GBase-DWDM
CSFP+10G光模块

CXP光模块 (16)

F-tone Networks’s CXP-120G-SR12 CXP transceiver modules is a high performance, low power consumption, long reach interconnect solution supporting 100G Ethernet, Infiniband QDR,DDR,SDR,1G/2G/4G/8G/10G fiber channel and PCIe. It is compliant with the 120Gbits Small Form factor Hot-Pluggable CXP-interface. F-tone Networks’s CXP transceiver modules is an assembly of 12 full-duplex lanes, where each lane is capable of transmitting data at rates up to 10.5Gb/s, providing an aggregated rate of 120Gb/s.
CXP光模块

CFP光模块 (51)

Patented WDM Optical Front End IEEE P802.3ba 40GBASE/ 100GBASE Compliant ITU-T G .694.2 CWDM Grid Structure Link Distance up to 100m/10km/40km CFP MSA Compliant
CFP光模块

CFP2光模块 (33)

10x10GBASE-SR and Extended Reach 100GBASE-SR10 300m CFP2 Optical Transceiver;Form Factor: CFP2 Distance: 100 m Data Rate (max): 103.1 Gb/s Wavelength: 850nm Band,Protocol: 100G Ethernet Compliant 100GBASE-SR10 and OTN Multirate 100m CFP2 Optical Transceiver;Form Factor: CFP2 Distance: 100 m Data Rate (max): 112 Gb/s Wavelength: 850nm Band,Protocol: OTN OTU4 Compliant 100G Ethernet Compliant 100GBASE-LR4 10km CFP2 Optical Transceiver;Form Factor: CFP2 Distance: 10 km Data Rate (max): 103.1 Gb/s Wavelength: 1310nm Band,Protocol: 100G Ethernet Compliant 100GBASE-LR4 and OTU4 Dual Rate 10km CFP2 Optical Transceiver;Form Factor: CFP2 Distance: 10 km Data Rate (max): 112 Gb/s Wavelength: 1310nm Band;Protocol: 100G Ethernet Compliant
CFP2光模块

CFP4光模块 (17)

100GBASE-SR4 100m CFP4 Optical Transceiver;CFP4 850nm 100m,up to103.1Gb/s 100GBASE-SR4 and OTN Multirate 100m CFP4 Optical Transceiver;CFP4 850nm 100m,up to112Gb/s 100GBASE-LR4 10km CFP4 Optical Transceiver;CFP4 1310nm 10km,up to 103.1 Gb/s 100GBASE-LR4 and OTN Multirate 10km CFP4 Optical Transceiver;CFP4 1310nm 10km,up to 112Gb/s
CFP4光模块

Camera Link (4)

北亿纤通专业研发生产:Camera Link, 是一家专业的Camera Link厂家,具有优质的Camera Link品质,有很好的Camera Link价格,Camera Link海量交付给国防、军工、航空、航天、兵器、舰船、雷达、电子、核工业、军事、电力、铁路、医疗、交通、通信、电信、政府、国防科技工业系统内大专院校及科研院所

Items starting with C

CFP-40G-LR4

CFP-40G-LR4

  • Transmission data rate up to 11.2Gbps per channel
  • CFP MSA compliant
  • Compliant to IEEE 802.3ba specification for 40GBASE-LR4 links
  • OTU3 compatible
  • 1310nm Un-cooled CWDM DFB-DML ,Transmitter and optical MUX
  • High Sensitivity PIN-TIA and optical DEMUX
  • 1271, 1291, 1311, 1331nm CWDM grid in ITU-T G.694.2 up to 10km over a SMF
  • MDIO digital diagnostic and control capabilities.
  • compliant to CFP MSA Management Interface Specification, Draft 1.4
  • TX input and RX output CDR retiming
  • Hot pluggable electrical interface
  • Power class 1 (<8W max)
  • Operating case temperature 0°C to +70°C
  • 3.3V power supply
  • RoHS 6 compliant(lead free

CFP-40G-SR4

CFP-40G-SR4

  • Transmission data rate up to 11.2Gbit/s per channel
  • CFP MSA compliant
  • Compliant to IEEE 802.3ba specification for 40GBASE-SR4 links
  • Up to 11.2 Gbps per channel bandwidth,
  • OTU3 compatible
  • 4 channels 850nm VCSEL array
  • 4 channels PIN photo detector array
  • OM3 Multimode Fiber cable of up to 300m and OM4 Multimode Fiber cable of up to 400m
  • MDIO digital diagnostic and control capabilities.
  • compliant to CFP MSA Management Interface Specification, Draft 1.4
  • TX input and RX output CDR retiming
  • Hot pluggable electrical interface
  • Power class 1 (<8W max)
  • Operating case temperature 0°C to +70°C
  • 3.3V power supply
  • RoHS 6 compliant(lead free)

CFP-SR10光模块

CFP-SR10光模块

The CFP optical transceiver module are a high performance, low power consumption, short reach(1m to 100m) interconnect solution supporting 100G Ethernet and PCIe. It is compliant with the CFP MSA and IEEE P802.3ba 100GBASE-SR10. F-tone Networks CFP SR10 modules offer 10 transmit and 10 receive asynchronous channels operating at up to 11.2Gbps per channel.the transmitter side of the module consists of an array of VCSELs (Vertical Cavity Surface Emitting Lasers) and associated circuitry, which converts 10 parallel electrical data inputs to 10 parallel optical data output signals and also converts 10 parallel optical signals into 10 parallel electrical signals through an array of PIN photodiodes and associated circuitry.

CFP2 Pluggable EDFA

CFP2 Pluggable EDFA

CFP2 Pluggable EDFA

北亿纤通自主研发生产CFP2 Pluggable EDFA光模块,已海量交付给工厂自动化、电力、能源、太阳能、风电、水电、火电、核电、国防、军工、航空、航天、兵器、舰船、雷达、电子、核工业、军事、铁路、医疗、交通、通信、电信、政府、信创、国防科技工业系统内大专院校及科研院所

CFP2-100G-LR4

CFP2-100G-LR4

10km OTU4/100G Ethernet CFP2 Optical Transceiver Module (CFP2-100G-LR4),F-tone’s CFP2-100G-LR4 100G CFP2 transceiver modules are designed for use in 100 Gigabit Ethernet and 4x28G OTN client interfaces over single mode fiber. They are compliant with the CFP MSA, IEEE 802.3ba 100GBASE-LR4 and OTU4 4I1-9D1F requirements specified in ITU-T Recommendations G.959.1/G.709 and Supplement 39 (G.sup39).

CFP2-100G-SR10

CFP2-100G-SR10

CFP2-100G-SR10 CFP2, 850 nm, 3.3 V, 100GBASE-SR10 Compliant Pluggable Ethernet Optical Transceiver

CFP2-100G-SR10

CFP2-100G-SR10

The CFP2 optical transceiver module are a high performance, low power consumption, short reachinterconnect solution supporting 100G Ethernet and Telecom. It is compliant with the CFP2 MSA and IEEE P802.3ba 100GBASE-SR10. F-tone NetworksCFP2 SR10 modules offer 10 transmit and 10 receive asynchronous channels operating at up to 11.18Gbps per channel.the transmitter side of the module consists of an array of VCSELs (Vertical Cavity Surface Emitting Lasers) and associated circuitry, which converts 10 parallel electrical data inputs to 10 parallel optical data output signals and also converts 10 parallel optical signals into 10 parallel electrical signals through an array of PIN photodiodes and associated circuitry.

CFP4 Optical Transceiver

CFP4 Optical Transceiver

This CFP Multi-Source Agreement (MSA) defines the CFP4 form factor of an optical transceiver which can support  40Gbit/s and 100Gbit/s interfaces for Ethernet, ITU-T OTN and other applications. Specifications provided in this document are given as a “delta” to the CFP MSA Hardware Specification Rev.1.4 or the CFP2 Hardware Specification Rev. 1.0.

CFP4-100G-LR4-1310NM

CFP4-100G-LR4-1310NM

CFP4 LR4,CFP4-100G-LR4-1310NM is a fully integrated 100Gbit/s optical transceiver module that consists of a 1310 nm wavelength cooled EA-DFB LD, Driver IC, PIN photo-diode, pre-amplifier, dual clock and data recovery (CDR) ICs with 25 Gbit/s electrical interface which complies with CFP2 Multiple Source Agreement (MSA) specifications. This compact size transceiver module is 50% smaller than F-tone Networks’s first generation CFP solution.

CFP4-100G-SR4 Optical Transceiver

CFP4-100G-SR4

CFP4-100G-SR4:F-tone Networks’s 100Gb/s transceiver module for optical communication applications compliant to 100GBASE-SR4 of the IEEE P802.3bm standard. The module converts 4 input channels of 25Gb/s electrical data to 4 channels of VCSEL optical signals over 4 multimode fibers for 100Gb/s optical transmission. Reversely, on the receiver side, the module receives 4 channels of VCSEL optical signals over 4 multimode fibers and then converts them to 4 output channels of electrical data.The high speed VCSEL transmitters and high sensitivity PIN receivers provide superior performance for 100Gigabit Ethernet applications up to 100m links over OM4 multimode fibers and compliant to optical interface with IEEE802.3bm Clause 95 100GBASE-SR4 requirements.

CG-03-00-3293-LX 光缆组件

CG-03-00-3293-LX 光缆组件
型号说明:组件一端为 1 个 RP7R12T 插头(铜镀镍壳体),二端为 2 个 MTPYD 插头(不带导针,母头), 适配φ3.5 十二芯多模 OM3 铠甲光缆,光缆总长为 X 米。订货前需与设计确定长度信息,以防因长度不合适造成方案不适用。

CLASS B+ 2488/1244Mb/s With Digital RSSI Function SFP GPON OLT Transceiver

CLASS B+ 2488/1244Mb/s With Digital RSSI Function SFP GPON OLT Transceiver

CLASS B+ 2488/1244Mb/s With Digital RSSI Function SFP GPON OLT Transceiver

It is based on the ITU-T G.984.2 Class B+ specifications for bidirectional communications over a single fiber and incorporates a high performance 1310nm Burst Mode APD/TIA receiver and 1490nm CW mode DFB transmitter with internal optical isolator.

CLASS C++ 2488/1244Mb/s With Digital RSSI SFP GPON OLT Transceiver

CLASS C++ 2488/1244Mb/s With Digital RSSI SFP GPON OLT Transceiver

CLASS C++ 2488/1244Mb/s With Digital RSSI SFP GPON OLT Transceiver

It is based on the ITU-T G.984.2 Class C+ specifications for bidirectional communications over a single fiber and incorporates a high performance 1310nm Burst Mode APD/TIA receiver and 1490nm CW mode DFB transmitter with internal optical isolator.

CLIPPER Series

CLIPPER Series

CLIPPER Series

Key features and benefits
● UL94V0
● REACH
● RoHS
● Sealing: IP67/ IP68 / IP69K

Coaxial Analog Optical Transmitter with TEC

Coaxial Analog Optical Transmitter with TEC

Coaxial Analog Optical Transmitter with TEC

Features
◆Low noise, use coaxial optical device with TEC
◆Support ITU C Band
◆Wide operating frequency from 10MHz to 21GHz

<<  1 [23 4 5 6  >>  

Search