标准光模块

  2. 首页
  3. 标准光模块
  4. 光源
  5. 852nm DFB Light Source

标准协议光模块

兼容协议光模块

其它种类光器件

技术支持

852nm DFB Light Source

852nm DFB Light Source

0.0/5 rating (0 votes)

Description

Description
F-tone Networks’stabilized DFB lasers are high output power, narrow linewidth light sources with high side mode suppression ratios. They are available at any customer-specified wavelengths and any ITU wavelength in the S, C, L bands at  for optical sensing applications. DFB Laser are available in benchtop or OEM module. In the benchtop unit, the output power , alarms and driving current values are shown on the LCD display. Output power can be adjusted by tuning the front panel control knob. Also active emission button is used to enhance operation safety. 1MHz intensity modulation is also available. The OEM module version is an ideal building block for OEM system integrators, especially in fiber optic sensing applications. It requires only a single +5V power supply with low power consumption.

Feathure
Wide wavelength coverage
High output power
Good wavelength stability
Compact size
Good performance cost ratio
Two year warranty

Application
Optical component testing
Gas analysis
Biomedical analysis
Spectroscopy
Research & development

Specification

Parameters

 Unit

Specification

Min

Typ

M ax

Part NO.

FT-93-852-B-DFB

Output power

mW

-

50

-

Central Wavelength

nm

851

852

853

Spectrual width（FWHM）with FBG

MHz

-

2

10

SMSR

dB

35

45

55

Polarization Extinction Ratio(PER)

dB

25

30

-

Output power stability（15min）2

dB

20

-

-

Output power stability（8hours）2

%

-

±0.1

±0.5

Output power adjustable range

%

-

±0.5

±1.0

Output power Adjustable Mode

%

0

-

100

Power supply

Coarse/Fine

Power consumption3

VAC

170

220

260

Operation temperature

W

-

-

5

Storage temperature

℃

0

-

50

Output fiber type

℃

-40

-

85

Lengh of the output type

Panda 5/125um NA=0.13

Optical  connectors

m

> 1

Dimension

FC/APC

a. The central wavelength can be Customized；
b. The test condition of the power stability is 25℃，30mins Warming up；
c. The bigest power consumption tested under the extreme condition.

Ordering information
FT-93-852-B-DFB-PW-SP
B：Benchtop
PW：output power,unit:mW.eg：10-10mW，50-50Mw
SP：Output isolator 0-without, 1-with

 

 

 

 

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

Related Products

1550nm SLD Light Source

1550nm SLD Light Source

1550nm SLD Light Source

F-tone Networks offers different equipments to the optical communication industry. Our main products include both optical source and transmitter for converting an electrical signal into an optical signal, followed by passing through optical fiber and multiple kinds of amplifiers for signal modification, and finally optical receivers to recover the signal to electrical signal.

Show Details

1310nm SLD Light Source

1310nm SLD Light Source

1310nm SLD Light Source

F-tone Networks offers different equipments to the optical communication industry. Our main products include both optical source and transmitter for converting an electrical signal into an optical signal, followed by passing through optical fiber and multiple kinds of amplifiers for signal modification, and finally optical receivers to recover the signal to electrical signal.

Show Details

1064nm SLD Light Source

1064nm SLD Light Source

1064nm SLD Light Source

F-tone Networks offers different equipments to the optical communication industry. Our main products include both optical source and transmitter for converting an electrical signal into an optical signal, followed by passing through optical fiber and multiple kinds of amplifiers for signal modification, and finally optical receivers to recover the signal to electrical signal.

Show Details

760nm DFB Light Source

760nm DFB Light Source

760nm DFB Light Source

F-tone Networks’stabilized DFB lasers are high output power, narrow linewidth light sources with high side mode suppression ratios. They are available at any ITU wavelength in the S, C, L bands and at any customer-specified wavelengths for optical sensing applications. DFB Laser are available in benchtop or OEM module. In the benchtop unit, the output power , alarms and driving current values are shown on the LCD display. Output power can be adjusted by tuning the front panel control knob.

Show Details

1083nm DFB Light Source

1083nm DFB Light Source

1083nm DFB Light Source

F-tone Networks’stabilized DFB lasers are high output power, narrow linewidth light sources with high side mode suppression ratios. They are available at any customer-specified wavelengths and any ITU wavelength in the S, C, L bands at  for optical sensing applications. 

Show Details

1064nm DFB Light Source

1064nm DFB Light Source

1064nm DFB Light Source

F-tone Networks’stabilized DFB lasers are high output power, narrow linewidth light sources with high side mode suppression ratios. They are available at any customer-specified wavelengths and any ITU wavelength in the S, C, L bands at  for optical sensing applications.

Show Details

Search