8×100G-FR 2km QSFP-DD Optical Transceiver

Product Description
F-tone Networks’s QSFP-DD 8*100 Gbps transceiver module is designed for use in 800 Gigabit Ethernet links over 2km single mode fiber. This product has 8 independent electrical input/output channels which can converts 106.25Gbps (PAM4) electrical input data to 8 channels of 106.25Gbps (PAM4) parallel optical signals, and also converts 8 channels of parallel optical signals of 106.25Gbps (PAM4) for each channel into 8 channels of 106.25Gbps (PAM4) electrical output data. The module incorporates 8 parallel channels on 1310nm center wavelength, operating at 106.25G per channel. The electrical interface of the module is compliant with the 800GAUI-8 interface as defined by IEEE 802.3ck, and compliant with QSFP-DD MSA.

Features
● Supports 850Gbps
● Single 3.3V Power Supply
● Up to 2km over SMF with KP4 FEC
● supported at the Host side
● MPO-16 connector
● 8x106.25Gbps (PAM4) electrical interface
● PIN and TIA array on the receiver side
● Power dissipation < 18W
● Commercial case temperature range:0°C to 70°C
● Safety Certification: TUV/UL/FDA*1
● RoHS Compliant

Applications
● 8x100G Ethernet
● 2x400G Ethernet
● 1x800G Ethernet

本产品为FT-AM系列，仅展示部分参数，如有需要，请联系我们。
注：本产品有全国产化型号可选

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.