标准光模块

  2. 首页
  3. 标准光模块
  4. CFP2光模块
  5. 400G CFP2-DCO

标准协议光模块

兼容协议光模块

其它种类光器件

技术支持

400G CFP2-DCO

400G CFP2-DCO

0.0/5 rating (0 votes)

Description

CFP2-DCO transceiver modules are designed for N*400G DWDM transmission system. They are compliant with OIF-CFP2-DCO-01.0 standard, OIF 400ZR/OpenZR+ standard and CFP MSA CFP2 Hardware Specification.

Features
● Hot-pluggable CFP2 form factor
● Coherent Optical Technology inside
● Full flexgrid C-band tunable: 191.3~196.1 THz
● Modulation: DP-QPSK, DP-8QAM, DP-16QAM
● Tx output power: -10dBm~ 3dBm with Build-In Amp(w/o TOF)
● OSNR: 14.8dB@200G, 22.5dB@400G
● Power Consumption: 25W(Max)
● Optional OTN supported

Application
● C-band N*400G DWDM transmission system

 

 

 

 

 

 

注：本产品有全国产化型号可选
本产品为FT-XL系列，仅展示部分参数，如有需要，请联系我们。

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

 

Related Products

100G CFP4

100G CFP4

100G CFP4

F-tone Networks CFP4-100GBASE-LR4 and CFP4-100GBASE-ER4 module supports a link length of 10, 20 and 40km on standard single-mode fiber (SMF, G.652). 100 Gigabit Ethernet signal is carried over four wavelengths. 

Show Details

200G-QSFP56-2.1

200G-QSFP56-2.1

200G-QSFP56-2.1

200G-FR4 QSFP56 is a Multi-Vendor MSA Compatible 200G-FR4 QSFP56 (Quad Small Form-Factor Pluggable) Transceiver designed for operation over Single-Mode Fiber (SMF). 200GBASE-FR4 QSFP56 has a QSFP form factor, built in 200G PAM4 (Pulse Amplitude Modulation 4-level) DSP (Digital Signal Processor) and module supports four electrical interface lanes, which can operate in 50G PAM4 encoding mode resulting in 200G (4x50G) data rate.

Show Details

100G-CFP4-40

100G-CFP4-40

100G-CFP4-40

    100G-CFP4-40 is Multi-Vendor MSA Compatible CFP4 (C = 100 in Roman numerals; Centum F = Form Factor; P = Pluggable; 4th generation) optical transceiver, designed to support 100G Ethernet (100GBASE-ER4) and 112G OTN according ITU-T G.959.1 ap¬plications using four parallel LAN WDM separated data lanes on each direction .

Show Details

100G-CFP2-10

100G-CFP2-10

100G-CFP2-10
    100G-CFP2-10 is Multi-Vendor MSA Compatible CFP2 (C (centum) Form Factor Pluggable 2) Transceiver, operating over 4 Parallel Lanes of Double Fiber Single-Mode Fiber (SMF) optical cable. It has minimum guaranteed optical budget of 6.3 dB, with in most cases is enough to reach about 10 km distance.

Show Details

100G-CFP2-100

100G-CFP2-100

100G-CFP2-100
    100G-CFP2-100 is Multi-Vendor MSA Compatible CFP2 (C (centum) Form Factor Pluggable 2) Transceiver, operating over 10 Parallel Lanes of Double Fiber Multi-Mode Fiber (MMF) optical cable. It has minimum guaranteed optical budget of 1.9 dB, with in most cases is enough to reach about 100m distance.

Show Details

400G ZR+ QSFP-DD DCO

400G ZR+ QSFP-DD DCO

400G ZR+ QSFP-DD DCO

QSFP-DD transceiver modules are designed for N*400G DWDM transmission system. They are compliant with OpenZR+ standard and QSFP-DD MSA QSFP-DD Hardware Specification.

Show Details

Search