标准光模块

标准协议光模块

兼容协议光模块

其它种类光器件

技术支持

128GFC QSFP28 Optical Transceiver Module

128GFC QSFP28 Optical Transceiver Module

0.0/5 rating (0 votes)

Description

128GFC QSFP28 Optical Transceiver Module

Features

¨ 4 channels full-duplex transceiver modules

¨ Transmission data rate up to 28Gbps per channel for 128GFC/OTU4 application     

¨ 4 channels 850nm VCSEL array

¨ 4 channels PIN photo detector array

¨ Internal CDR circuits on both receiver and transmitter channels

¨ Support CDR bypass

¨ Low power consumption <2.0W

¨ Hot Pluggable QSFP form factor

¨ Maximum link length of 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF

¨ Single MPO connector receptacle

¨ 3.3V power supply voltage

¨ RoHS 6 compliant(lead free)

¨ Case operating temperature

         Commercial:0 ~ +70

         Industrial:-40 ~ +85

Applications

¨ OTU4/128GFC

Description

The F-tone Networks TechnologiesFTQ2-HG-SR4xx-OTU4 is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP28 SR4 for 128G Fiber Channel and OTU4 Applications. This transceiver is a high performance module for short-range multi-lane data communication and interconnect applications. It integrates four data lanes in each direction with 112.2 Gbps bandwidth. Each lane can operate at 28.05Gbps up to 70 m using OM3 fiber or 100 m using OM4 fiber. These modules are designed to operate over multimode fiber systems using a nominal wavelength of 850nm. The electrical interface uses a 38 contact edge type connector. The optical interface uses an 12 fiber MTP (MPO) connector. This module incorporates F-tone Networks Technologies proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.

 

Ordering information

Part Number

Product Description

FTQ2-HG-SR4-OTU4

QSFP28, 128GFC, 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF,0ºC ~ +70ºC

FTQ2-HG-SR4I-OTU4

QSFP28, 128GFC, 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF,-40ºC ~ +85ºC

 

 

 

 

 

 

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must bespecifically confirmed in writing by F-tone before they become applicable to any particular order or contract. In accordance with the F-tone policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone or others. Further details are available from any F-tone sales representative.

Search