10Gb/s SFP+ CWDM 40km Optical Transceiver Module

Description
FTCS-Cxx1X(1470~1610)-DZxx SFP+ transceiver is designed for use in 10-Gigabit Ethernet links up to 40km over single mode fiber. The module consists of CWDM EML Laser, 850nm VCSEL and Preamplifier in a high-integrated optical sub-assembly. Digital diagnostics functions are available via a 2-wire serial interface, as specified in SFF-8472.
FTCS-Cxx1X(1470~1610)-DZxx transceivers provide a unique enhanced digital diagnostic monitoring interface, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, and received optical power and transceiver supply voltage. It also defines a sophisticated system of alarm and warning flags, which alerts end-users when particular operating parameters are outside of a factory set normal range.
The SFP+ MSA defines a 256-byte memory map in EEPROM that is accessible over a 2-wire serial interface at the 8 bit address 1010000X (A0h). The digital diagnostic monitoring interface makes use of the 8 bit address 1010001X (A2h), so the originally defined serial ID memory map remains unchanged.

Features
● Up to 11.3Gb/s data links
● CWDM EML transmitter and VCSEL receiver
● Up to 40km on 9/125µm SMF
● Hot-pluggable SFP+ footprint
● Duplex LC/UPC type pluggable optical interface
● RoHS-10 compliant and lead-free
● Support Digital Diagnostic Monitoring interface
● Single +3.3V power supply
● Compliant with SFF+MSA and SFF-8472
● Metal enclosure, for lower EMI
● Meet ESD requirements, resist 8KV direct contact voltage
● Case operating temperature
      Industrial: -40 ~ +85℃

Applications
● 10GBASE-LR/LW & 10G Ethernet
● SDH STM64
● Other Optical Links

Mechanical Specifications (Unit: mm)

Part Number Ordering Information

 Wavelength Selection: CWDM λ Wavelength Guide Pin Descriptions

 备注：LOS脚是OMA LOS模式，有信号加载的时候低电压，有光无信号加载或者无光的时候高电压。

注：本产品有全国产化型号可选
本产品为SFP CWDM系列光模块，如有需要，请联系我们。