- Contact Us：
-
+86-028-85255257
- sales@f-tone.com
标准光模块
标准协议光模块
- 全国产化光模块
- 25G~400G高速光模块
- 200km超长距光模块
- 5G移动通信光模块
- SFP光模块
- CWDM SFP
- DWDM SFP
- BIDI-SFP
- SGMII SFP
- HDMI
- Video SFP光模块
- Copper SFP
- 低功耗SFP
- SFP+光模块
- CWDM SFP+
- DWDM SFP+
- BIDI SFP+
- Tunable SFP+
- QSFP光模块
- QSFP+ 光模块
- QSFP28光模块
- QSFP-DD光模块
- MicroQSFP光模块
- OSFP 400Gbps
- XFP光模块
- CWDM XFP
- DWDM XFP
- BIDI XFP
- 1x9光模块
- CSFP光模块
- CSFP+10G光模块
- 16GFC SFP+
- 25GE SFP+
- 32GFC SFP+
- CXP光模块
- CFP光模块
- CFP2光模块
- CFP4光模块
- CFP8 400Gbps
- CDFP 400Gbps
- DSFP光模块
- FT-61光模块
- OLT光模块
- ONU光模块
- PLCC光模块
- RJ光模块
- SFF光模块
- SFP-DD光模块
- SFP28光模块
- SNAP12光模块
- USOT光模块
- X2光模块
- Xenpak光模块
- 光电编码器模块
- 光模块测试板
- 光模块笼子座子
- DAC 高速线缆
- 光纤滑环|光电滑环
- 光缆车
- 军品级DIN光模块
- 塑料光纤模块
- 替换安华高工业电力光模块
- 兼容国产化替换安华高光耦
- 射频光模块
- 微型多路光模块
- 特种光模块
- 特种光纤连接器
- 特种光电连接器
- USB光纤延长线
- 特种电连接器
- 特种光纤光缆
- 光藕
- SMA测试线缆
- OSA
- PON BOSA
- Pigtailed PD
- RFoG BOSA
- TO-CAN
- 光纤温度传感器
- 光纤应变传感器
- 光纤加速度传感器
- 光线压力传感器
- 光纤位移传感器
- 光纤应力传感器
- 光纤传感分析仪
- 光纤分布式测温主机
- 光纤布里渊信号解调仪
- 分布式光纤声振信号解调仪
- Camera Link
兼容协议光模块
- 华为光模块
- 思科光模块
- 华三光模块
- 中航光电光模块
- 中兴光模块
- 锐捷光模块
- 惠普光模块
- 神州数码光模块
- Juniper光模块
- Extreme光模块
- Brocade光模块
- D-Link光模块
- 赫思曼光模块
- 阿尔卡特朗讯光模块
- Allied Telesis光模块
- Foundry光模块
- Force10光模块
- Blade光模块
- Linksys光模块
- Marconi光模块
- 博达光模块
- 网件光模块
- Nortel光模块
- Moxa光模块
- 海康威视HIKVISION光模块
- McAfee光模块
- SMC智邦光模块
- 安华高Avago光模块
- 飞通光模块
- Finisar光模块
- yellobrik SDI光模块
- 罗克韦尔AB光模块
- 罗杰康光模块
- 研华Advantech光模块
其它种类光器件
- 全国产化光器件
- 光纤阵列系列
- 高速模块微连接
- 相干通讯光连接
- 硅光子器件光链接
- Bio-Medical Equipment
- Components for Fiber Laser
- Components for Fiber sensing
- Components for Optical Network
- EDFA光纤放大器
- 光纤传感器
- High power Component
- Hybrid for EDFA
- Test Equipment & Others
- Test Equipment & Others
- 保偏光器件
- 光分路器
- 光开关
- 探测器
- 光功率计
- 全光纤相位拉伸器
- 光纤准直器
- 光衰减器系列
- 光偏振控制器
- 光源
- 光环行器Circulator
- 光纤延迟线
- 色散补偿模块
- 光纤放大器
- 无源传输转换器
- 光纤激光器
- 光调制器
- 光电探测器
- 光纤偏振
- 光纤滤波器
- 同轴激光器
- 同轴电缆
- 光纤法兰适配器
- 光纤跳线&尾纤
- SMA-特殊纤芯系列
- 特殊接头系列
- 铠装系列
- 光耦合器Coupler
- 皮纤跳线系列
- 大芯数系列
- 回路跳线系列
- 保偏光纤系列
- 光通信组件
- 光隔离器isolator
- 其它光器件
- 可调滤波器
- 可调衰减器
- 拉锥耦合器
- 无源光器件
- 法拉第旋转镜
- 波分复用器
- 滤波器
- 蝶形激光器
- 光耦合器&分路器
- 光纤环形器&法拉第旋转镜
- 光纤隔离器&波分复用器
- 光纤分束器&合束器（PBS/PBC）
- 光纤光栅
- 高速线缆
技术支持
100GBASE-LR4 and OTN Multirate 10km CFP4 Optical Transceiver
Description
100G CFP4 transceiver modules are designed for use in 100 Gigabit Ethernet and 4x28G OTN client interfaces over single mode fiber. They are compliant with the CFP MSA, IEEE 802.3ba 100GBASE-LR4, IEEE 802.3bm CAUI-4, OTU4 4I1-9D1F specified in ITU-T Recommendations G.959.1/G.709 and Supplement 39 (G.sup39) and OIF CEI-28G-VSR. Digital diagnostics functions are available via the MDIO interface, as specified by the CFP MSA and Application Note AN-20xx. The optical transceiver is RoHS compliant as described in Application Note AN-2038.
Features
● Hot pluggable CFP4 form factor
● Supports 103.1Gb/s and 112Gb/s aggregate bit rate
● Power dissipation < 5W
● RoHS compliant
● Single 3.3V power supply
● Maximum link length of 10km on Single Mode Fiber (SMF)
● 4x28Gb/s DFB-based LAN-WDM transmitter
● 4x28G electrical interface
● Duplex LC receptacles
● MDIO management interface
● Commercial case temperature range: 0°C to 75°C
Applications
● OTN OTU4 4I1-9D1F
● OTUC1 (FOIC1.4)
● 100GBASE-LR4 100G Ethernet
注：本产品有全国产化型号可选
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
Related Products
200G-CFP2-DCO
200G-CFP2-DCO
100G/200G CFP2 DCO module is dual rate (100G/200G) Coherent Multi-Vendor MSA Compatible CFP2 (C (centum) Form Factor Pluggable 2) Transceiver designed for operation over Double Fiber optical cable. On the transmission side, the module converts 25.78Gbps (CAUI-4) or 27.95Gbps (OTL4.4) electrical input channels into one Single Lambda 100G/200G optical signal.
100G-CFP4-10
100G-CFP4-10
100G-CFP4-10 is Multi-Vendor MSA Compatible CFP4 (C = 100 in Roman numerals; Centum F = Form Factor; P = Pluggable; 4th generation) optical transceiver, designed to support 100G Ethernet (100GBASE-LR4) and 112G OTN according ITU-T G.959.1 applications using four parallel LAN WDM separated data lanes on each direction .
100G-CFP4-100
100G-CFP4-100
100G-CFP4-100 is Multi-Vendor MSA Compatible CFP4 (C = 100 in Roman numerals; Centum F = Form Factor; P = Pluggable; 4th generation) optical transceiver, designed to support 100G Ethernet (100GBASE-SR4) and 112G OTN according ITU-T G.959.1 applications using four by parallel physical fiber separated data lanes on each direction .
100G CFP2 LR4
100G CFP2 LR4
LR4 CFP2 transceiver modules are designed for use in 100 Gigabit Ethernet links on up to 10km of single mode fiber. They are compliant with the CFP MSA and IEEE 802.3ba 100GBASE-LR4.The optical transceiver is RoHS compliant.
100GBASE-LR4 and OTU4 10 km Gen2 QSFP28 Optical Transceiver
100GBASE-LR4 and OTU4 10 km Gen2 QSFP28 Optical Transceiver
100GBASE-LR4 10km CFP4 Optical Transceiver
100GBASE-LR4 10km CFP4 Optical Transceiver
100G CFP4 optical transceiver modules are designed for use in 100 Gigabit Ethernet interfaces over single mode fiber. They are compliant with the CFP MSA, IEEE 802.3ba 100GBASE-LR4 and IEEE 802.3bm CAUI-4. Digital diagnostics functions are available via the MDIO interface, as specified by the CFP MSA and Application Note AN-20xx.