标准光模块

标准协议光模块

兼容协议光模块

其它种类光器件

技术支持

X2光模块

X2光模块

X2光模块是10G光模块中主要的一类封装模块,由XENPAK发展而来。是一种支持热插拔的输入/输出装置,主要用于以太网X2端口的交换机或路由器与网络连结端口。

X2光模块历史发展:

X2是从Xenpak标准演进而来的,其内部功能模块与Xenpak以及在电路板上的应用都基本相同,在实现10G以太网光接口的功能方面都是只使用一个模块即可。由于Xenpak光模块安装到电路板上时需要在电路板上操作比较复杂地开槽,且无法实现高密度应用。而经过改进的X2光模块(其体积只有Xenpak的一半左右)可以直接放到电路板上,因此适用于高密度的机架系统和PCI网卡应用。

X2光模块特点及应用:

X2也使用Xenpak电气接口,但有少数地方例外。X2 提供一个4位端口地址的空间,比Xenpak少一位。 X2 还减少了电源引脚的数目,并使底板和电气接地公用。X2保留了Xenpak的4个厂商专用的引脚。在光技术方面,X2支持10GbE(以太网)、 OC192同步光纤网、10GFC(光纤通道)和其他标准。

X2光模块

X2 to SFP+ Converter

X2 to SFP+ Converter

The F-tone X2 to SFP+ Converter Module offers investment protection for 10 Gigabit Ethernet X2 ports of X2 switches by enabling migration from X2 to Small Form-Factor Pluggable Plus (SFP+) form factor without having to upgrade or replace the switches. This Module converts a 10 Gigabit Ethernet X2 port into a 10 Gigabit Ethernet SFP+ port.

X2 Transceiver

X2 Transceiver

F-tone X2 is a standardized form factor for 10 Gb/s fiber optic transponders that is used for data transfer rates from 10.3 Gb/s to 10.5 Gb/s. It is protocol-specific: Either 10G Ethernet or 10G Fibre Channel versions are available. X2 transponders are used in datacom optical links only (not telecom), and they are smaller than old generation XENPAK transponders. Its electrical interface to the host board is also standardized and is called XAUI (4 x 3.125 Gb/s).

<<  1 [2

Search