标准光模块

  2. 首页
  3. 标准光模块
  4. QSFP28光模块
  5. QSFP28-OTU4-2KM光模块

标准协议光模块

兼容协议光模块

其它种类光器件

技术支持

100GE CWDM4 & OTU4 Dual Rate 2 km QSFP28 Optical Transceiver

QSFP28-OTU4-2KM光模块

0.0/5 rating (0 votes)

Specifications

  • 产品型号: 100GE CWDM4 & OTU4 Dual Rate 2 km QSFP28 Optical Transceiver
  • 兼容品牌: 全系列
  • 封装类型: QSFP28
  • 传输速率: 100GE CWDM4 & OTU4 Dual Rate 2 km QSFP28 Optical Transceiver
  • 传输距离: 100GE CWDM4 & OTU4 Dual Rate 2 km QSFP28 Optical Transceiver
  • 发射波长: 850nm 标称波长
  • 接收波长: 850nm 标称波长
  • 工作温度: 商业级0℃～+70℃/工业级-40℃～+85℃ 可选
  • 数字诊断: 带DDM
  • 接收灵敏度: 100GE CWDM4 & OTU4 Dual Rate 2 km QSFP28 Optical Transceiver
  • 接收灵敏度: 100GE CWDM4 & OTU4 Dual Rate 2 km QSFP28 Optical Transceiver

Description

100GE CWDM4 & OTU4 Dual Rate 2 km QSFP28 Optical Transceiver

 

F-tone Networks’s QSFP28-OTU4-2KM QSFP28 transceiver modules are designed for use in 100 Gigabit Ethernet and 4x28G OTN client interfaces on up to 2 km of single mode fiber. They are compliant with the QSFP28 MSA, CWDM4 MSA, and relevant portions of IEEE P802.3bm. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA and F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html". The optical transceiver is compliant per the RoHS Directive 2010. See F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html" for more details.

Key Features

  • Hot-pluggable QSFP28 form factor
  • Supports 111.8Gb/s aggregate bit rate
  • 3.5W maximum power dissipation
  • Single 3.3V power supply
  • Maximum link length of 2km on Single Mode Fiber (SMF)
  • 4x28Gb/s 1310nm DFB-based transmitter
  • 4x28G electrical interface
  • Full digital diagnostics functions
  • Integrated 4-channel CWDM mux/demux for duplex LC operation
  • Duplex LC receptacles

Applications

  • 100GBASE-LR4 100G Ethernet
  • ITU OTU4

Specifications

Distance:
2 km
Data Rate (max):
112 Gb/s
Protocol:
OTN OTU4 Compliant
 
100G Ethernet Compliant
Low End Case Temperature (°C):
0
High End Case Temperature (°C):
70
Diagnostics:
Digital
Transmitter:
4x DFB Laser
Receiver:
PIN
Voltage Supply:
3.3
Connector:
LC
Wavelength:
1310nm Band

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networksbefore they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

 

Related Products

QSFP28-100G-SR4

QSFP28-100G-SR4

F-tone’s QSFP28-100G-SR4 module is a 4-channel transceiver capable of transmitting and receiving 100 Gbps simultaneously. F-tone’s QSFP28-100G-SR4 transceiver performs at high speeds while consuming extremely low power—allowing for > 50% reduction in power consumption compared to 4 SFP+ inF-tonerconnects.

Show Details

QSFP28-SR4光模块

QSFP28-100GBASE-SR4

F-tone QSFP28-100GBASE-SR4是一个 4 通道可插拔光纤QSFP28收发器模块装置,设计用于100GbE短程数据中心互连,符合IEEE802.3 100GBASE-SR4规定和 100 米多模光纤介质的标准。本装置每个方向集成 4 个 25.78125 Gbps 的数据通道，达到 103.125 Gbps 的聚合带宽。通过采用一个 8 芯光纤（或者 12 芯光纤）的 MPO 光学多模 OM4 线缆，使得光学互操作性长达 100 米。推拉式拉环有助于该装置在高密度连接应用中插入和拉出。每个电气通道在 25.78125 Gbps 的速率下操作并且符合 802.3 条款 91 RS-FEC 中 100GE CAUI4 接口的规定。QSFP28-100GBASE-SR4 在设计上使用 850nm 标称波长于多模光纤系统上运作。电气接口采用 38 接点的 QSFP28 边缘型连接器。光接口采用传统的 8 芯光纤（或者 12 芯光纤）MPO 连接器。本装置采用 F-tone 的优质集成电路和 VCSEL 技术，以便为用户提供长久可靠的高性能和始终如一的服务。

Show Details

QSFP28-SR4光纤模块

QSFP28-SR4光模块

100GBASE-SR4 100m QSFP28 Optical Transceiver

F-tone Networks’s FT-QSFP28-SR4 100G QSFP28 transceiver modules are designed for use in 100 Gigabit Ethernet links over multimode fiber. They are compliant with the QSFP28 MSA and IEEE 802.3bm 100GBASE-SR4 and CAUI-4. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA and F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html". The optical transceiver is compliant per the RoHS Directive 2010. See F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html". for more details.

Show Details

QSFP28-128GFC-SR4光模块

QSFP28-128GFC-SR4

100GBASE-SR4, OTU4 & 128G Fibre Channel Multirate 100m QSFP28 Optical Transceiver 

F-tone Networks’s QSFP28-128GFC-SR4 100G QSFP28 transceiver modules are designed for use in 100 Gigabit Ethernet, 128GFC and 4x28G OTN links over multimode fiber. They are compliant with the QSFP28 MSA, 128GFC, IEEE 802.3bm 100GBASE-SR4 and CAUI-4. Digital diagnostics functions are available via the I2C interface as specified by the QSFP28 MSA. The optical transceiver is compliant per the RoHS Directive 2010. See F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html" for more details.

Show Details

QSFP28-SR4-Limited光模块

QSFP28-SR4-Limited光模块

100GBASE-SR4 with Limited or No FEC QSFP28 Optical Transceiver

F-tone Networks’s QSFP-SR4-Limited 100G QSFP28 transceiver modules are designed for use in 100 Gigabit Ethernet links over multimode fiber. They are compliant with the QSFP28 MSA. They are capable of operating (a) without forward error correction (FEC) provided by the host, (b) with reduced Firecode 74 FEC present per IEEE 802.3by2 25GBASE-SR and Clause 74, or (c) with full RS FEC present per IEEE 802.3bm3 100GBASE-SR4, Clause 91, and CAUI-4. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA and F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html". The optical transceiver is compliant per the RoHS Directive 2010. See F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html" for more details.

Show Details

100GE CWDM4 2 km QSFP28 Optical Transceiver

QSFP28-100GE-2km光模块

100GE CWDM4 2 km QSFP28 Optical Transceiver

F-tone Networks’s QSFP28-100GE-2km QSFP28 transceiver modules are designed for use in 100 Gigabit Ethernet links on up to 2 km of single mode fiber. They are compliant with the QSFP28 MSA, CWDM4 MSA, and relevant portions of IEEE P802.3bm. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA. The optical transceiver is compliant per the RoHS Directive 2010. See F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html" for more details.

Show Details

Search