标准光模块

  2. 首页
  3. 标准光模块
  4. BIDI SFP+
  5. 工业级25G BiDi SFP28单纤双向光模块（10km）

标准协议光模块

兼容协议光模块

其它种类光器件

技术支持

BIDI SFP+ transceiver

工业级25G BiDi SFP28单纤双向光模块（10km）

0.0/5 rating (0 votes)

Description

工业级25G BiDi SFP28单纤双向光模块（10km）

北亿纤通（F-tone Networks）的工业级25G BiDi SFP28单纤双向光收发模块用于数据中心25G以太网和5G前传CPRI/eCPRI链路,通过单根单模光纤（SMF）传输距离最高可达10千米。

 

特征:
▪ 采用可热插拔的SFP28封装
▪ 全双工收发一体模块
▪ CWDM DFB激光器和PIN光电探测器
▪ 接收和发射通道内置CDR电路
▪ 符合SFP28 MSA、25G以太网和CPRI/eCPRI标准
▪ 最大速率高达25.78125Gbps
▪ 可选波长：1270nm/1330nm和1330nm/1270nm
▪ 通过单根单模光纤传输距离最高可达10千米
▪ 最大功耗小于1.2W
▪ 单工LC光口
▪ 工作温度范围从-40到+85摄氏度
▪ 电源电压3.3V
▪ 符合RoHS环保标准（无铅）

应用:
▪ 数据中心25G以太网
▪ 5G前传CPRI/eCPRI

 

 

Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

Related Products

DWDM SFP+ 10G 40KM

DWDM SFP+ 10G 40KM

  1. Compliant with SFF-8431 and IEE802.3ae
  2. Suitable for use in 100GHz channel spacing DWDM systems
  3. Data rate selectable ≤4.25Gbps or 9.95Gbps to 10.3Gbps bit rates
  4. Cooled EML transmitter and PIN receiver
  5. link length up to 40km
  6. Low Power Dissipation 1.5W Maximum
  7. Operating Case Temperature:Standard :  0 to +70°C / Industrial : -40 to +85°C 
  8. Single 3.3V power supply
  9. Diagnostic Performance Monitoring of module temperature, supplyVoltages, laser bias current, transmit optical power, receive optical power
  10. RoHS compliant and lead free

Show Details

DWDM SFP+ 10G 80KM

DWDM SFP+ 10G 80KM

  1. Compliant with SFF-8431 and IEE802.3ae
  2. Suitable for use in 100GHz channel spacing DWDM systems
  3. Data rate selectable ≤4.25Gbps or 9.95Gbps to 10.3Gbps bit rates
  4. Cooled EML transmitter and PIN receiver
  5. link length up to 80km
  6. Low Power Dissipation 1.5W Maximum
  7. Operating Case Temperature:Standard :  0 to +70°C / Industrial : -40 to +85°C 
  8. Single 3.3V power supply
  9. Diagnostic Performance Monitoring of module temperature, supplyVoltages, laser bias current, transmit optical power, receive optical power
  10. RoHS compliant and lead free

Show Details

Tunable SFP+

Tunable DWDM SFP+ Transceiver

F-tone tunable SFP+ transceiver is fully compliant to SFP+ MSA. It supports 50GHz DWDM 10Gb/s SONET/SDH, 10 Gigabit Ethernet, and 10 Gigabit Fibre Channel applications over fiber without dispersion compensation. Digital diagnostics functions are available via a 2-wire serial interface, as specified in the SFP+ MSA and SFF 8472 MSA.

Show Details

SDH SFP+ transceiver

SDH SONET SFP+ transceiver

Compliant with Small Form Pluggable (SFP) Multi Source Agreement (MSA) mechanical and electrical specifications for LC Duplex transceivers, ANSI Fibre Channel transceiver for FC-PI-5 and FC-PI-2 gigabit applications.

 

Show Details

CWDM 10G SFP+ Transceiver

CWDM 10G SFP+ Transceiver

F-tone CWDM SFP+  transceiver is small form factor pluggable module for bi-directional serial optical data communications such as IEEE 802.3ae 10GBASE-LR/LW/ER/ZR. It is with the SFP 20-pin connector to allow hot plug capability. Digital diagnostic functions are available via an I2C. This module is designed for single mode fiber and operates at a nominal wavelength of CWDM wavelength.

Show Details

2.5G CWDM SFP

工业级25G CWDM SFP28光模块（10km）

工业级25G CWDM SFP28光模块（10km）

北亿纤通（F-tone Networks）的工业级25G CWDM SFP28光收发模块用于数据中心25G以太网和5G前传CPRI/eCPRI链路,通过单模光纤（SMF）传输距离最高可达10千米。

Show Details

Search