标准光模块

  2. 首页
  3. 标准光模块
  4. 射频光模块
  5. 6GHz Mini Analog Fiber Optical Transmitter

标准协议光模块

兼容协议光模块

其它种类光器件

技术支持

6GHz Mini Analog Fiber Optical Transmitter

6GHz Mini Analog Fiber Optical Transmitter

0.0/5 rating (0 votes)

Specifications

  • 产品型号: 6GHz Mini Analog Fiber Optical Transmitter
  • 兼容品牌: 全系列
  • 封装类型: Smallsize
  • 传输速率: Wide operating frequency from 100MHz to6GHz
  • 传输距离: Fiber link up to 60km
  • 发射波长: 6GHz Mini Analog Fiber Optical Transmitter
  • 接收波长: 6GHz Mini Analog Fiber Optical Transmitter
  • 工作温度: 商业级0℃～+70℃/工业级-40℃～+85℃ 可选
  • 数字诊断: 6GHz Mini Analog Fiber Optical Transmitter
  • 接收灵敏度: 6GHz Mini Analog Fiber Optical Transmitter
  • 接收灵敏度: 6GHz Mini Analog Fiber Optical Transmitter

Description

6GHz Mini Analog Fiber Optical Transmitter

Features

  • Lownoise
  • Smallsize
  • Flat frequencyresponse
  • High dynamicrange
  • Excellent EMI/EMCdesign
  • Wide operating frequency from 100MHz to6GHz
  • APC&ATC maintain small vibration of output power and IP3

Applications

  • Delay line
  • Antenna remoting
  • Securecommunication
  • OFDM fibertransmission
  • Distributed antennasystem
  • Wideband wirelesscommunication

Absolute Maximum Ratings

Parameter

Symbol

Condition

Min.

Max.

Unit

Operating Temperature

Tc

 

-20

+50

°C

Storage Temperature

Tstg

 

-40

+85

°C

DC Operating Voltage

VD

 

 

-6V@Tx+6V@Rx

V

RF Input Power

PRF

 

 

20

dBm

Relative Humidity

HR

 

 

95

%

Pressure

PR

 

86

106

kpa

ESD

 

Human body model

 

Class 1A

 

Typical Specification

Parameter

Test Condition

MIN.

TYP.

MAX.

Unit

Frequency Range

 

100M ~ 6G

Hz

Optical Wavelength

Transmitter

optional

nm

Output Optical Power

+25℃

--

10

--

dBm

Gain

10GHz Tx no Gain, Rx no Gain

-30

-28

--

dB

Ripple of Passband

100MHz ~ 3GHz

--

±0.5

±2

dB

3GHz ~ 6GHz

--

±0.5

±2

dB

Input Return Loss (50 Ω)

100MHz ~ 6GHz

--

-11

-10

dB

P-1

1GHz

--

18

--

dBm

SFDR

1GHz

110

116

--

dB·Hz2/3

3GHz

110

113

--

dB·Hz2/3

6GHz

108

113

--

dB·Hz2/3

Input IP3

1GHz

30

35

--

dBm

3GHz

29

34

--

dBm

6GHz

28

33

--

dBm

Noise Figure

1GHz

--

35

38

dB

3GHz

--

37

42

dB

6GHz

--

39

42

dB

Power Consumption

+5V, TX no Gain

--

--

4.0

W

-5V

--

0.35

0.5

W

Operating Voltage

 

+5V, -5V

VDC

 Note: With F-tone Networks Optical Receiver and 1.0 meter SMF-28 single-mode fiber.

Connector

Type

Connector

RF

K (2.92mm,50Ω)

Optical

FC/APC

Optical Fiber Type

SMF-28(Standard)

Power

EMI Low Pass FilterFeed Through Capacitor

 PIN Function

Optical Transmitter

PIN

Name

Direction

Note

1

POWER

Ⅰ

+5V

2

POWER

Ⅰ

-5V

3

GND

Ⅰ

GND

4

SMA

Ⅰ

RF in

Ordering Information

FTRFT

-

0

C

N

xxx

F

K

-

U

010

Transmitter

      

Gain

N: No Gain

CWDM Laser Wavelength

270: 1270nm

………………….

370: 1370nm

      

Temperature Range

U: -20 to 50℃

  

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networksbefore they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

Related Products

XFP-OA Optical Amplifier

XFP-OA Optical Amplifier

RF-over-Fiber XFP-OA Optical Amplifier

F-tone Networks’s XFP-OA Optical Amplifier is an Erbium-Doped Fiber Amplifier (EDFA) in a small form factor hot-pluggable optical module. It amplifies optical signals to enable long Hybrid Fiber Coaxial links and/or high optical splitting for RF-over-Glass architectures. The optical output power, which is settable by the user, is kept constant through an active feedback loop.

The XFP-OA can be paired with F-tone Networks’s wavelength-tunable XFP-RF Transmitters for single wavelength applications or Dense Wavelength Division Multiplexing (DWDM) up to 8 wavelengths. It installs into the same F-tone Networks XFP-RF host system so it can be monitored and controlled through embedded Web Browser Graphical User Interface or through a network management system.

Show Details

Tunable 3GHz XFP-RF Transmitter

Tunable 3GHz XFP-RF Transmitter

Tunable DWDM 3GHz XFP-RF Transmitter

F-tone Networks’s 3GHz XFP-RF transmitter is a small form factor hot-pluggable optical module that is compliant with interface specifications developed by the Society of Cable Telecommunications Engineers (SCTE). The wavelength of the transmitter can be electronically set to any of 43 DWDM wavelengths across the entire C-band in less than 0.5 second. An integrated wavelength locker keeps the wavelength within 2GHz of the wavelength center over the life of the transmitter. It can be fully loaded with analog carriers from 50 MHz to 3000 MHz in order to enable operators to effectively utilize a broad range of frequencies when designing distributed antenna systems and RF Over Fiber networks. The small XFP module significantly reduces power consumption and increases density for downstream transmitters.

Show Details

Tunable 1.2GHz XFP-RF Transmitter

Tunable 1.2GHz XFP-RF Transmitter

Tunable 1.2GHz XFP-RF Transmitter

F-tone Networks’s XFP-RF transmitter is a small form factor hot-pluggable optical module that is compliant with interface specifications developed by the Society of Cable Telecommunications Engineers (SCTE). The wavelength of the transmitter can be electronically set to any of 43 DWDM wavelengths across the entire C-band in less than 0.5 second. An integrated wavelength locker keeps the wavelength within 2 GHz of the wavelength center over the life of the transmitter. It can be fully loaded with digital QAM channels from 50 MHz to 1218 MHz to enable cable operators to more effectively segment their serving groups and offer more services to their subscribers. The small XFP module significantly reduces power consumption and increases density for downstream transmitters. These modules can be integrated into today’s Hybrid-Fiber Coaxial (HFC) optical broadband platforms and tomorrow’s converged
access platforms (CCAP).

Show Details

20GHz Mini Analog Optic Receiver

20GHz Mini Analog Optic Receiver

20GHz Mini Analog Optic Receiver

Features

  • Small size: 19.8*16.0*9.6mm
  • High responsivity:  ≥0.6 @ 1310nm

≥0.7 @ 1550nm

  • Wide operating frequency from 10MHz to 20GHz
  • Wide wavelength range from 1260nm to 1620nm
  • DC-block and matched to 50 Ohm

Applications

  • Antenna remoting
  • GPS signal transport
  • Wireless signal transport
  • Distributed antenna system
  • High speed test and measurement
  • Video Signal Distribution in HFC and FTTx Nodes

Show Details

18GHz High Dynamic Analog Optic Transmitter

18GHz High Dynamic Analog Optic Transmitter

18GHz High Dynamic Analog Optic Transmitter

Features

  • Low noise
  • Small size
  • Flat frequency response
  • High dynamic range
  • Excellent EMI/EMC design
  • Wide operating frequency from 100MHz to 18GHz
  • APC&ATC maintain small vibration of output power and IP3

Applications

  • Delay line
  • Antenna remoting
  • Secure communication
  • OFDM fiber transmission
  • Distributed antenna system
  • Wideband wireless communication

Show Details

12GHz High Dynamic Analog Optic Transmitter

12GHz High Dynamic Analog Optic Transmitter

12GHz High Dynamic Analog Optic Transmitter

Features

  • Low noise
  • Small size
  • Flat frequency response
  • High dynamic range
  • Excellent EMI/EMC design
  • Wide operating frequency from 100MHz to 12GHz
  • APC&ATC maintain small vibration of output power and IP3

Applications

  • Delay line
  • Antenna remoting
  • Secure communication
  • OFDM fiber transmission
  • Distributed antenna system
  • Wideband wireless communication

Show Details

Search