标准光模块

  2. 首页
  3. 标准光模块
  4. QSFP28光模块
  5. 100GBASE-SR4 QSFP28 to 2x QSFP28 Active Optical Cable

标准协议光模块

兼容协议光模块

其它种类光器件

技术支持

100GBASE-LR4 10 km QSFP28 Optical Transceiver

100GBASE-SR4 QSFP28 to 2x QSFP28 Active Optical Cable

0.0/5 rating (0 votes)

Description

100GBASE-SR4 QSFP28 to 2x QSFP28 Active Optical Cable

F-tone Networks’s 100GBASE-SR4 QSFP28 to 2x QSFP28 Active Optical Cable are designed for use in 100 Gigabit Ethernet links on up to 10km of single mode fiber. They are compliant with the QSFP28 MSA, IEEE 802.3ba QSFP+ Extender (up to 80KM or I00KM) and IEEE 802.3bm CAUI-4. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA and F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html". The optical transceiver is compliant per the RoHS Directive 2010. See F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html" for more details.

 

Features
• 4 channels full-duplex transceiver modules
• Transmission data rate up to 28Gbps per channel
• Support 40GE and 56G FDR data rate
• 4 channels 850nm VCSEL array
• 4 channels PIN photo detector array
• Internal CDR circuits on both receiver and transmitter channels
• Support CDR bypass
• Low power consumption : QSFP28-100G < 2.5W and QSFP28-50G <1.6W
• Hot Pluggable QSFP form factor
• Maximum link length of 70m on OM3 Multimode Fiber (MMF)and 100m on OM4 MMF
• Single MPO connector receptacle
• Operating case temperature ;Standard : 0 to +70°C;Industrial : -40 to +85°C
• 3.3V power supply voltage
• RoHS 6 compliant(lead free)


Applications
• IEEE 802.3bm 100GBASE SR4 and 40GBASE SR4
• Infiniband FDR/EDR
• 32G Fiber Channel

standards compliance
● QSFP+ End
Electrical: IBTA V2 Revision 1.2.1 and 1.3
IEEE 802.3ba
SFF-8436
● SFP+ End
SFF-8431
SFF-8432
SFF-8472
RoHS

Information:

Part Number

Product Description

QSFP-2QSFP-XXX

QSFP28 to 2 x QSFP28, 100GBASE-SR4, Active Optical Cable  70m on OM3 Multimode Fiber (MMF)and 100m on OM4  Low power version,0 to +70°C

QSFP-2QSFP-XXXI

QSFP28 to 2 x QSFP28, 100GBASE-SR4, Active Optical Cable  70m on OM3 Multimode Fiber (MMF)and 100m on OM4  Low power version,-40 to +85°C

 

Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networksbefore they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

 

Related Products

QSFP28-SR4光模块

QSFP28-100GBASE-SR4

F-tone QSFP28-100GBASE-SR4是一个 4 通道可插拔光纤QSFP28收发器模块装置,设计用于100GbE短程数据中心互连,符合IEEE802.3 100GBASE-SR4规定和 100 米多模光纤介质的标准。本装置每个方向集成 4 个 25.78125 Gbps 的数据通道，达到 103.125 Gbps 的聚合带宽。通过采用一个 8 芯光纤（或者 12 芯光纤）的 MPO 光学多模 OM4 线缆，使得光学互操作性长达 100 米。推拉式拉环有助于该装置在高密度连接应用中插入和拉出。每个电气通道在 25.78125 Gbps 的速率下操作并且符合 802.3 条款 91 RS-FEC 中 100GE CAUI4 接口的规定。QSFP28-100GBASE-SR4 在设计上使用 850nm 标称波长于多模光纤系统上运作。电气接口采用 38 接点的 QSFP28 边缘型连接器。光接口采用传统的 8 芯光纤（或者 12 芯光纤）MPO 连接器。本装置采用 F-tone 的优质集成电路和 VCSEL 技术，以便为用户提供长久可靠的高性能和始终如一的服务。

Show Details

QSFP28-SR4光纤模块

QSFP28-SR4光模块

100GBASE-SR4 100m QSFP28 Optical Transceiver

F-tone Networks’s FT-QSFP28-SR4 100G QSFP28 transceiver modules are designed for use in 100 Gigabit Ethernet links over multimode fiber. They are compliant with the QSFP28 MSA and IEEE 802.3bm 100GBASE-SR4 and CAUI-4. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA and F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html". The optical transceiver is compliant per the RoHS Directive 2010. See F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html". for more details.

Show Details

QSFP28-128GFC-SR4光模块

QSFP28-128GFC-SR4

100GBASE-SR4, OTU4 & 128G Fibre Channel Multirate 100m QSFP28 Optical Transceiver 

F-tone Networks’s QSFP28-128GFC-SR4 100G QSFP28 transceiver modules are designed for use in 100 Gigabit Ethernet, 128GFC and 4x28G OTN links over multimode fiber. They are compliant with the QSFP28 MSA, 128GFC, IEEE 802.3bm 100GBASE-SR4 and CAUI-4. Digital diagnostics functions are available via the I2C interface as specified by the QSFP28 MSA. The optical transceiver is compliant per the RoHS Directive 2010. See F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html" for more details.

Show Details

QSFP28-SR4-Limited光模块

QSFP28-SR4-Limited光模块

100GBASE-SR4 with Limited or No FEC QSFP28 Optical Transceiver

F-tone Networks’s QSFP-SR4-Limited 100G QSFP28 transceiver modules are designed for use in 100 Gigabit Ethernet links over multimode fiber. They are compliant with the QSFP28 MSA. They are capable of operating (a) without forward error correction (FEC) provided by the host, (b) with reduced Firecode 74 FEC present per IEEE 802.3by2 25GBASE-SR and Clause 74, or (c) with full RS FEC present per IEEE 802.3bm3 100GBASE-SR4, Clause 91, and CAUI-4. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA and F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html". The optical transceiver is compliant per the RoHS Directive 2010. See F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html" for more details.

Show Details

QSFP28-OTU4-2KM光模块

QSFP28-OTU4-2KM光模块

100GE CWDM4 & OTU4 Dual Rate 2 km QSFP28 Optical Transceiver

F-tone Networks’s QSFP28-OTU4-2KM QSFP28 transceiver modules are designed for use in 100 Gigabit Ethernet and 4x28G OTN client interfaces on up to 2 km of single mode fiber. They are compliant with the QSFP28 MSA, CWDM4 MSA, and relevant portions of IEEE P802.3bm. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA and F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html". The optical transceiver is compliant per the RoHS Directive 2010. See F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html" for more details.

Show Details

QSFP28-OTU4-LR4光模块

QSFP+ Breakout to SFP+ Cage Converter

QSFP+ Breakout to SFP+ Cage Converter

F-tone Networks’sQSFP+ Breakout to SFP+ Cage Converter are designed for use in 100 Gigabit Ethernet links on up to 10km of single mode fiber. They are compliant with the QSFP28 MSA, IEEE 802.3ba  QSFP+ Breakout to SFP+ Cage Converter and IEEE 802.3bm CAUI-4. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA and F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html". The optical transceiver is compliant per the RoHS Directive 2010. See F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html" for more details

Show Details

QSFP28-100GE-LR4光模块

F-tone Networks 100G CFP to QSFP28 Adapter

QSFP+ Extender (up to 80KM or I00KM)

F-tone Networks’s QSFP+ Extender (up to 80KM or I00KM) are designed for use in 100 Gigabit Ethernet links on up to 10km of single mode fiber. They are compliant with the QSFP28 MSA, IEEE 802.3ba QSFP+ Extender (up to 80KM or I00KM) and IEEE 802.3bm CAUI-4. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA and F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html". The optical transceiver is compliant per the RoHS Directive 2010. See F-tone Networks Application Note "http://www.f-tone.com/qsfp28-reference.html" for more details.

Show Details

Search