标准光模块

  2. 首页
  3. 标准光模块
  4. QSFP28光模块
  5. 100G Parallel MMF with Reduced or No FEC QSFP28 Optical Transceiver

标准协议光模块

兼容协议光模块

其它种类光器件

技术支持

100G Parallel MMF with Reduced or No FEC QSFP28 Optical Transceiver

100G Parallel MMF with Reduced or No FEC QSFP28 Optical Transceiver

0.0/5 rating (0 votes)

Description

100G QSFP28 transceiver modules are designed for use in 100 Gigabit Ethernet links over multimode fiber. They are compliant with the QSFP28 MSA. They are capable of operating (a) without forward error correction (FEC) provided by the host, (b) with reduced Firecode 74 FEC present per IEEE 802.3by 25GBASE-SR and Clause 74, or (c) with full RS FEC present per IEEE 802.3bm 100GBASE-SR4, Clause 91, and CAUI-4. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA and Application Note AN-2141. The optical transceiver is RoHS compliant as described in Application Note AN-2038.

Features
● Hot-pluggable QSFP28 form factor
● Supports 103.1Gb/s aggregate bit rate
● Supports operation without host FEC for lowest latency and minimal host power dissipation
● Maximum link length of 30m on OM3 and 40m on OM4 without host FEC
● Maximum link length of 50m on OM3 and 70m on OM4 with host Clause 74 (Firecode) FEC
● Maximum link length of 70m on OM3 and 100m on OM4 with host Clause 91 (RS) FEC
● Power dissipation <2.5W
● Commercial case temperature range of 0°C to 70°C
● Single 3.3V power supply
● 4x25Gb/s 850nm VCSEL-based transmitter
● 4x25G electrical interface
● Single MPO12 receptacle
● RoHS compliant
● I2C management interface

Applications
● 4x25GBASE-SR 25G or 100GBASE-SR4 100G Ethernet without host FEC
● 4x25GBASE-SR 25G or 100GBASE-SR4 Ethernet with Firecode host FEC
● 100GBASE-SR4 100G Ethernet with RS host FEC
● InfiniBand EDR

 

 

 

 

 

注：本产品有全国产化型号可选
Important Notice

Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.

The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.

Related Products

100G 100m SWDM4 QSFP28 Optical Transceiver

100G 100m SWDM4 QSFP28 Optical Transceiver

100G 100m SWDM4 QSFP28 Optical Transceiver

100G QSFP28 transceiver modules are designed for use in 100G Ethernet links over duplex multimode fiber. They are compliant with the QSFP28 MSA and IEEE 802.3bm CAUI-4. Digital diagnostics functions are available via the I2C interface, as specified by the QSFP28 MSA and Application Note AN-2171. 

Show Details

100G Parallel MMF 100m QSFP28 with Pigtail Transceiver

100G Parallel MMF 100m QSFP28 with Pigtail Transceiver

100G Parallel MMF 100m QSFP28 with Pigtail Transceiver

100G QSFP28 pigtail transceiver modules are designed for use in 100 Gigabit Ethernet links over multimode fiber and can endure liquid immersion environment. They are compliant with the QSFP28 MSA and IEEE 802.3bm 100GBASESR4 and CAUI-4.

Show Details

200GBASE-FR4 2km QSFP56 Optical Transceiver

200GBASE-FR4 2km QSFP56 Optical Transceiver

200GBASE-FR4 2km QSFP56 Optical Transceiver

200G QSFP56 transceiver modules are designed for use in 200 Gigabit Ethernet interfaces over single mode fiber. They are compliant with the CMIS4.0, QSFP MSA and portions of IEEE P802.3bs. The optical transceiver is RoHS compliant as described in Application Note AN-2038.

Show Details

200GBASE-FR4 500m QSFP56 Optical Transceiver

200GBASE-FR4 500m QSFP56 Optical Transceiver

200GBASE-FR4 500m QSFP56 Optical Transceiver

200G QSFP56 transceiver modules are designed for use in 200 Gigabit Ethernet interfaces over single mode fiber. They are compliant with the CMIS4.0, QSFP MSA and portions of IEEE P802.3bs. The optical transceiver is RoHS compliant as described in Application Note AN-2038.

Show Details

200GBASE-SR4 QSFP56 Optical Transceiver

200GBASE-SR4 QSFP56 Optical Transceiver

200GBASE-SR4 QSFP56 Optical Transceiver

200G QSFP56 SR4 transceiver modules are designed for use in 200 Gigabit Ethernet interfaces over multi-mode fiber. They are compliant with the QSFP MSA and portions of IEEE 802.3-2018 and 802.3cd. Digital diagnostics functions are available via the I2C interface, as specified by the CMIS 4.0. 

Show Details

100G Ethernet, OTU4 & 128G Fibre Channel Multirate 100m Gen2 QSFP28 Optical Transceiver

100G Ethernet, OTU4 & 128G Fibre Channel Multirate 100m Gen2 QSFP28 Optical Transceiver

100G Ethernet, OTU4 & 128G Fibre Channel Multirate 100m Gen2 QSFP28 Optical Transceiver

100G QSFP28 transceiver modules are designed for use in 100 Gigabit Ethernet, 128GFC and 4x28G OTN client links over multimode fiber. They are compliant with the QSFP28 MSA, 128GFC, IEEE 802.3bm 100GBASE-SR4 and CAUI-4. Digital diagnostics functions are available via the I2C interface as specified by the QSFP28 MSA and Application Note AN-2141. 

Show Details

Search